I just got the a Lii600 charger a LiitoKala distributor on Aliexpress. It looks like mine came from a distributor in the US as the package has a Hebron Kentucky address. I did notice that the individual light went on and were red till the batteries were charged and then the lights turned green. when the batteries are fully charged the large screen lights up. From what I gathered from reading the directions is when all the batteries are charged you are supposed to unplug the device and remove the batteries and wait till it cools before using it again as it gets pretty hot. The directions say the same for the LiiPD4. I did not notice any noise from my charger. The only issue that I have with the Lii600 Charger, is it will not charge 32700 LiFePO4 Batteries and the PD4 will. The LI-Ion 34650 batteries will charge in both chargers but due to the size, only 2 batteries can be charged at at time.
One question I have: which capacity should be considered after making a TEST battery , charging or discharging battery capacity? When should be considered a dead battery and to be recicled ?
Discharging capacity should be shown, charging capacity is not really interesting. You can also charge the cell and then make a discharge to see it. Dead NiMH or LiIon? NiMH isn´t dangerous, maybe it lost (lots) of capacity after overdischarged. LiIon could be ver< dangerous, it could be explode after it was overdischarged, some ppl say below 2,5V should be disposed
Thank you for your review. I want to ask if you get a hissing/bussing noise from the power adapter of the LiitoKala Lii-600 while charging? Mine is very noisy.
Hi. How to turn the beeping ON/OFF please? Mine stopped beeping and I'd like to hear that beep when changing options and when the charger is done with each battery. Thank you!
Greetings. I'm from Brazil and I saw your video on RUclips about Liitokala Lii-600. I bought one and I find it very strange that many 18650 cells I have indicate that the resistance is at 116 m oms. I haven't found any cells of mine that show resistance greater than 116 m oms either. could it be a defect of Liitokala? I've looked for content on the internet and found nothing about it. Please help me, thanks.
What's wrong with your Lii-600 ? I'm planning to buy that in the future if I'm not satisfied with my Nitecore UMS2 charger. 3A at four battery slots charging at the same time may come handy sometimes but I normally charge only at 500mA even for 18650 batteries as it's good for battery longevity. I'm not in a hurry to get my batteries full 😁
There's nothing wrong with it ifound that if you long press any of the top 4 buttons it'll fluctuate between the display staying on indefinitely and timing out after a few seconds. Definitely like it better than the 500. Rapid charging when testing a lot of batteries will save you tons of time I think it's a nice feature to have even if you don't use it often.
@@Georgeebrice I just bought VAPCELL S4 PLUS it shows all four battery status at the same time thru the battery icons. It also charge all 4 slots at 3A & makes a sound when a battery is full. I learned that if your Liitokala charger gets really hot the four buttons will not be responsive. Physical buttons is much better I think. Fast charging doesn't charge the battery well besides it will shorten it's lifespan.
Sou Brasileiro, ja testei um lii-500 e também tem o mesmo problema, ou seja, não é defeito, apenas os aparelhos não sai precisos, testei e a cada hora dava um valor diferente, as vezes o dobro de diferença 👎🏽
hi, it is normal for the display to go out, as you know just tap the button it will come back on. here is a video link that i just watched. Mine should arrive sometime next week, hope that help, bye. ruclips.net/video/QLeRKZczV6M/видео.html
There is nothing wrong with device. Screen turns off automatically by default but if you want to keep it always on follow those simple instructions ruclips.net/video/C75TXpUkt5A/видео.html also if you want to get accurate battery reaistance you can use this tool ruclips.net/video/FOXpYZ-SAc4/видео.html
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
hold down slot 1 key to change on/off display according to another site
I have taken liitokala 600 but like yours the meter is not showing the om resistance correctly which means the meter is not working properly.
I just got the a Lii600 charger a LiitoKala distributor on Aliexpress. It looks like mine came from a distributor in the US as the package has a Hebron Kentucky address. I did notice that the individual light went on and were red till the batteries were charged and then the lights turned green. when the batteries are fully charged the large screen lights up. From what I gathered from reading the directions is when all the batteries are charged you are supposed to unplug the device and remove the batteries and wait till it cools before using it again as it gets pretty hot. The directions say the same for the LiiPD4. I did not notice any noise from my charger. The only issue that I have with the Lii600 Charger, is it will not charge 32700 LiFePO4 Batteries and the PD4 will. The LI-Ion 34650 batteries will charge in both chargers but due to
the size, only 2 batteries can be charged at at time.
Wondering is the Internal resistance accurate? I mean if you test it compared with a dedicated internal resistance measurement tool
One question I have: which capacity should be considered after making a TEST battery , charging or discharging battery capacity?
When should be considered a dead battery and to be recicled ?
Discharging capacity should be shown, charging capacity is not really interesting. You can also charge the cell and then make a discharge to see it.
Dead NiMH or LiIon? NiMH isn´t dangerous, maybe it lost (lots) of capacity after overdischarged. LiIon could be ver< dangerous, it could be explode after it was overdischarged, some ppl say below 2,5V should be disposed
Thank you for your review. I want to ask if you get a hissing/bussing noise from the power adapter of the LiitoKala Lii-600 while charging? Mine is very noisy.
O meu e normal
Hi. How to turn the beeping ON/OFF please? Mine stopped beeping and I'd like to hear that beep when changing options and when the charger is done with each battery. Thank you!
Saya malah mau bunyinya hilang
Greetings.
I'm from Brazil and I saw your video on RUclips about Liitokala Lii-600. I bought one and I find it very strange that many 18650 cells I have indicate that the resistance is at 116 m oms. I haven't found any cells of mine that show resistance greater than 116 m oms either.
could it be a defect of Liitokala? I've looked for content on the internet and found nothing about it.
Please help me, thanks.
Estou com seu mesmo problema, vou devolver
What's wrong with your Lii-600 ? I'm planning to buy that in the future if I'm not satisfied with my Nitecore UMS2 charger. 3A at four battery slots charging at the same time may come handy sometimes but I normally charge only at 500mA even for 18650 batteries as it's good for battery longevity. I'm not in a hurry to get my batteries full 😁
There's nothing wrong with it ifound that if you long press any of the top 4 buttons it'll fluctuate between the display staying on indefinitely and timing out after a few seconds. Definitely like it better than the 500. Rapid charging when testing a lot of batteries will save you tons of time I think it's a nice feature to have even if you don't use it often.
@@Georgeebrice I just bought VAPCELL S4 PLUS it shows all four battery status at the same time thru the battery icons. It also charge all 4 slots at 3A & makes a sound when a battery is full. I learned that if your Liitokala charger gets really hot the four buttons will not be responsive. Physical buttons is much better I think. Fast charging doesn't charge the battery well besides it will shorten it's lifespan.
Sou Brasileiro, ja testei um lii-500 e também tem o mesmo problema, ou seja, não é defeito, apenas os aparelhos não sai precisos, testei e a cada hora dava um valor diferente, as vezes o dobro de diferença 👎🏽
Recebi um m também e está com este defeito do video
hi, it is normal for the display to go out, as you know just tap the button it will come back on.
here is a video link that i just watched. Mine should arrive sometime next week, hope that help, bye.
ruclips.net/video/QLeRKZczV6M/видео.html
There is nothing wrong with device. Screen turns off automatically by default but if you want to keep it always on follow those simple instructions ruclips.net/video/C75TXpUkt5A/видео.html also if you want to get accurate battery reaistance you can use this tool ruclips.net/video/FOXpYZ-SAc4/видео.html
boring