This is what we all wanted an enthisuaist working on a dealership. Treat the car as how they treat theirs and not just a job. Keep up the good work. Somehow watching paint those panels are soothing. Request: install coilovers on CU2/4 i need a guide how to do it.
This video was very satisfying from start to finish..the soft top while in the shop to try and maintain that interior as clean and safe as possible was a nice detail 👌
I have an ap1 painted formula red. Have chips, scratches and a rock chip on pass door. Rear bumper painted is cracking off. Would really like o get you guys to take a look at it and see if you can help out. I stay close to Pembroke. Thanks again
Great content you guys are awesome , I wish I could bring my car to a place that works with only oem parts and knows how to bring back a classic the right way just like from factory .
WOW!! what a finish, I watched the series on your channel Brian but it's nice to see the complete job condensed into 35mins, if you have the time I have a question for you Brian, I lay down my first coat of clear and it looks great with a flat glassy finish but after the second coat it has quite a lot of peel in it, I use the same gun same settings and distance but I just move a little sower, any idea as to why this is happening? flash off is 10mins and I'm using the Roberlo Kronox 610 UHS clear (not sure if you have heard of that clear), any help would be appreciated mate, John UK.
Hi John It’s hard to say without seeing in person but give it proper flashing time. Sometimes the paint under can react if you don’t slow It to properly flash first. Also don’t pound on the second coat too much either because that can cause issues when drying. Nice even wet coats but not too thick.
Ok thanks Brian, maybe I'm putting to much on on the second coat, flash time I'm using is as the data sheet recommends, it's around 25-30C in my booth.
Man what a piece of junk. JK. That right there must have been a dream come true for the owner. This is the nicest S2000 I've ever seen and its all thanks to to you guys. You're all amazing at what you do
We're getting a new model of the Nissan Z, we got the all new supra, gtr is getting a remake, acura is bringing back the type S, how come honda doesn't bring back the 2000, I'm sure sales would be great.
Anyone know where i can get the center caps he has for his rears ce28n. My flat cap wont fit with the center bore in the way. Anyone knows the owner of the car? His instagram?
For AHC Garage Apparels and Merchandises:
acurahondaclassic.com/
You guys really like what you do, every costumer wants their car be treated like it was your own. Keep it up guys.
Thanks for the compliments
They are the best 👍🏻
I’ve seen the before and after if this car, and all I say is WOW! Looks even nicer in person. Good job to all you guys at AHC!
Thanks very much Alex!!
You guys do an awesome job on every job. Wish I was in Florida so I can have you guys work on my car.
Thanks 👍
This is what we all wanted an enthisuaist working on a dealership. Treat the car as how they treat theirs and not just a job. Keep up the good work. Somehow watching paint those panels are soothing. Request: install coilovers on CU2/4 i need a guide how to do it.
Well said!
Wow, i gotta say, Brian with them Crocs stole the show for me. Not even a Spoon S2k can beat that comfort. lol
ABSOLUTELY GORGEOUS S2K
Cheers!!
Man the attention to details. You guys did an Exceptional job on this s2k.
Thank you 🙏🏼
Omg, that’s what my Type S need, Beautiful
Thanks 🙏🏼
Flawless, the quality of your work is just amazing and you make it look so easy!
Thanks for your compliments
Johnny Tran would be proud.
Great job.
Thank you!!
This is THE WAY.👏🏼👏🏼
Cheers!!
such an underrated channel
Thank you!!
Nice job on the S2000 !
Thanks! 👍
Wish you guys have a shop in NYC! 😭
👍🏼👍🏼
This video was very satisfying from start to finish..the soft top while in the shop to try and maintain that interior as clean and safe as possible was a nice detail 👌
Thank you
What amazing job🔥🔥🔥🔥AHC garage 💪💪💪💪
Much appreciate it
Clean. Awesome work!
Thank you! Cheers!
Excellent work as usual guys!
Thank you
I need to find a shop like this in NYC with this level of services!
Thank you!!!
The end result is freaking beautiful...👍💪🤙
Thank you! Cheers!
Beautiful job
Thanks 🙏🏼
Utterly mesmerised by this, stunning job guys, car looks perfect 👍👍.
Thanks a ton!
wow came out super clean!
Thanks 👍🏼
Y’all next level !!!
Thanks!!!
Non-tinted clear on NFR? Beautiful job in any case! We need you in LA !!
Hope we can get out to LA in the near future
@@ahcgarage me too! My car is clean and low mileage but would love to have it new again!
Mantap boss😙
Very Nice!!!! Very Nice Indeed!!!!!
singram1978 Thank you!!
I’m guessing this paint job is $20k+. Wow! Fantastic quality !
Not that much. Thanks for watching!!
I have an ap1 painted formula red. Have chips, scratches and a rock chip on pass door. Rear bumper painted is cracking off. Would really like o get you guys to take a look at it and see if you can help out. I stay close to Pembroke. Thanks again
Shoot us an email: AcuraHondaClassic@gmail.com
Great work.
Thank you 🙏🏼
looks badass
Agreed!!
Great content you guys are awesome , I wish I could bring my car to a place that works with only oem parts and knows how to bring back a classic the right way just like from factory .
WOW!! what a finish, I watched the series on your channel Brian but it's nice to see the complete job condensed into 35mins, if you have the time I have a question for you Brian, I lay down my first coat of clear and it looks great with a flat glassy finish but after the second coat it has quite a lot of peel in it, I use the same gun same settings and distance but I just move a little sower, any idea as to why this is happening? flash off is 10mins and I'm using the Roberlo Kronox 610 UHS clear (not sure if you have heard of that clear), any help would be appreciated mate, John UK.
Hi John
It’s hard to say without seeing in person but give it proper flashing time. Sometimes the paint under can react if you don’t slow
It to properly flash first. Also don’t pound on the second coat too much either because that can cause issues when drying. Nice even wet coats but not too thick.
Ok thanks Brian, maybe I'm putting to much on on the second coat, flash time I'm using is as the data sheet recommends, it's around 25-30C in my booth.
Hi guys I’m wondering how long did it take them to do entire job???
Hey I have an 02 with AP2 wheels on it. I want to put a higher sidewall on the car. Can I go to a 225/65/17 on front and 245/60/17 on rear?
IMPRESSIVE............
👍🏼👍🏼
Wow ! Amazing ! Can you paint my car now? Lol
Where is located your workshop?
Man what a piece of junk.
JK. That right there must have been a dream come true for the owner. This is the nicest S2000 I've ever seen and its all thanks to to you guys. You're all amazing at what you do
Thanks for the view
Wheel spec?
Is it square with spoon front and oem rear?
I wish they project My Honda Crosstour and test the limit
@what wheels is that ?? The bronze one
Those are Volk Racing CE28
AHC Garage thanks
Is it r-77 formula red or r-510 new formula red?
WHAT IS THE PIECE BETWEEN THE DOOR AND WHEEL CALLED IVE BEEN LOOKING FOR YEARS
Fender??
Amazing
Thank you! Cheers!
like this color..may I know the color code..?pls
Formula Red R-510
@@ahcgarage thanks..is it the same color thats used by 'Seeker' (Japan Tuner )as their official car color?
😍👍nice..
Appreciate it
Just WOW!! :o
👍🏼👍🏼
I Red 1996 Integra GSR full body kits . I want to repaint it Red like this car. How I get estimates??
What does that paint job cost?
That's all vary base on the condition and parts required. You can have a "Paint Job" that can ranges between $1000-6000.
what paint code is it ????? like what color is that!
New Formula Red (R-510)
How much was this job, well worth it.
👍👏
🥇
We're getting a new model of the Nissan Z, we got the all new supra, gtr is getting a remake, acura is bringing back the type S, how come honda doesn't bring back the 2000, I'm sure sales would be great.
Anyone know where i can get the center caps he has for his rears ce28n. My flat cap wont fit with the center bore in the way. Anyone knows the owner of the car? His instagram?
@ap2joe. That’s his IG
oh, she bad!
Also paint doesn’t match because the car is old been in the sun for years color changes and fresh paint sometimes doesn’t match.