MLAG configuration & Design in Arista Switches|example with Peer link group|MLAG domainID Interface
HTML-код
- Опубликовано: 9 фев 2019
- 𝗙𝗼𝗿 𝗖𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗣𝘆𝘁𝗵𝗼𝗻 𝗙𝗼𝗿 𝗡𝗲𝘁𝘄𝗼𝗿𝗸 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝘀 𝗖𝗼𝘂𝗿𝘀𝗲:
𝗘𝗻𝗿𝗼𝗹𝗹 𝗳𝗼𝗿 𝗯𝗲𝗹𝗼𝘄 𝗨𝗱𝗲𝗺𝘆 𝗖𝗹𝗮𝘀𝘀: 𝟐𝟎𝟐𝟐 𝐕𝐞𝐫𝐬𝐢𝐨𝐧
𝑫𝒊𝒔𝒄𝒐𝒖𝒏𝒕𝒆𝒅 𝑹𝒆𝒇𝒆𝒓𝒓𝒂𝒍 𝑳𝒊𝒏𝒌:
www.udemy.com/course/python-f... This video demonstrated MLAG Configuration and design in Arista switches , with MLAG Trunk and MLAG access Interfaces.
Please Subscribe to My channel below for updated
videos
/ @networkevolution
Configuration incudes
arista mlag peer address
arista mlag active
arista mlag command
arista mlag domain
arista mlag domain-id
mlag arista configuration,mlag arista example,arista mlag design,arista mlag peer address,arista mlag active,arista mlag command,arista mlag domain,arista mlag domain-id,arista mlag explained,arista mlag configuration example,arista mlag trunk group,arista mlag heartbeat,mlag in arista,arista mlag inter-switch communication,mlag configuration on arista,arista mlag port channel,arista mlag 3 switches,arista mlag trunk,arista mlag vlan,arista 7050 mlag,arista 7150s mlag,arista 7280r mlag
#AristaMLAG #MLAGexample #MLAGsample 
Наука
thanx man very helpful
Thank you.
Hi, Very helpful video thanks...If I have a scenario where I have 2 core arista switches and have all 2-3 access switches connected to each core switches . Also my core switches are connected to Fortigate firewall which provides the internet to the entire network. So how would I use MLAG at this situation.. Can you please help me configure this scenario
Very good video, thanks for posting. Can you please cut paste all the config lines used in the video
Ok sure.
When two switches are paired as M-Lag does those two switches have same IP address??
am faced with this challenge. i want to configure arista switch for sshkey so it can be using public key login instead of username & password
How did you install host with 2 nics in eve-ng? The standard host has 1 nic only. Did you create the custom template or linuz server?
What I do is use another multi-layer switch as a host. In a DC environment, the servers are more likely to have their ether-channels configured the same way vs. that of a PC. Running Arista's as host will also allow you true drop into the linux kernel and fun mock multicast traffic as well. Once your MLAGs and other parts of your network are built, you can expand into multicast.
it is Arista switch, and he change the icon/name
what is the veos image version for arista are you using?
Hello Arshad, I did this video couple of years back. I think I was using 17.3 that time