I’ve had two 2R Series Tractors, and can attest to the fact that the tractor design and controls layout is better than the JD 1, 3 and 4 series equivalents. JD need to standardize it’s Sub Compact, Compact and Utility Tractor lines with the same look and fell as the Two or Five E four cylinder tractors. In 2025 I trust they’ll announce a new Three R Series complete redesign including: four cylinder Yanmar diesel, Power Reverser, four range transmission, Suspicion Seat, MSL Loader, Longer frame for more more leg room whilst turning backward, etc.
You realize the 2032/2038 series 2R tractor spec can be ordered with a 220R MSL loader with 1,377 LBS lift capacity that blows the three series capability out of the water.
My brother has a kabota, biggest complaint i have with it is the petal placement on the hydrostatic. I cant use curse all the time so after long day, my leg had taken a beating. And i run 3-4 miles a day lol
I have not seen a video yet of ,a 2025r and a 2036r side by side comparison on anyone's channel.I know the 2 have different frames all together.Given your height so I can see the size of the tractor.From my perspective I'd like to have a longer wheel based tractor possibly an air ride seat.To comfort my back thank you ...Where I live we have a JD but they only have a limited inventory of units,'d have to drive a distance to see for myself and the weather is terrible at this given time.
Brint, Hope I spelled that right, I hope You'll take a minute and answer me on this. I found a 2014 2032 with 1044 hrs on it. Salesman says it has been well taken care of by the service record. I got them down to 18K , would that be good buy or could it be lower?? I'm serious about it. And could go some more then my offer of 15K. Thanks for any help. Dave
im still on the fence on what brand to buy. But I think you were really trying hard to find selling points on this machine. Seat, and color of levers ?
I feel like operator comfort is a big seller, especially if somebody is going to be using the machine for an extended period of time. The lever color is to show the ease of use. I don't feel like these were a stretch, in my opinion they are very important.
Western Equipment Thanks I was comparing the two Looks like lower price of this one then the 2038 . Since all is same but horsepower which is not much difference for me .
Nice video, I have a 2018 2038R and love it. It paid for itself this Winter!!
Thank you! That's what we like to hear, success stories are great! Thanks for watching!
I’ve had two 2R Series Tractors, and can attest to the fact that the tractor design and controls layout is better than the JD 1, 3 and 4 series equivalents.
JD need to standardize it’s Sub Compact, Compact and Utility Tractor lines with the same look and fell as the Two or Five E four cylinder tractors.
In 2025 I trust they’ll announce a new Three R Series complete redesign including: four cylinder Yanmar diesel, Power Reverser, four range transmission, Suspicion Seat, MSL Loader, Longer frame for more more leg room whilst turning backward, etc.
The cows were like your own studio audience the way the were lined up and watching, clinging to your every word. 😂
Hahaha yeah this was definitely a fun one to shoot. Too bad this was before we were doing bloopers!
Looking to get fed! We had to redo several takes because they would come in and interfere with the shots.
The cows seem to be enjoying your instructional feedback.
Brent, you forgot the most obvious reason, they are an absolute blast to drive and use! Happy New Year!
Happy New Year Gerald!
....Very Good Overview of this tractor....
Thanks!
You realize the 2032/2038 series 2R tractor spec can be ordered with a 220R MSL loader with 1,377 LBS lift capacity that blows the three series capability out of the water.
My brother has a kabota, biggest complaint i have with it is the petal placement on the hydrostatic. I cant use curse all the time so after long day, my leg had taken a beating. And i run 3-4 miles a day lol
We hear this complaint a lot about Kubota!
Excellent video, very informative, and I see this tractor as a good upgrade to the 1025r. I assume it is 4wd also?
Yes it is! Thanks for watching!
I have not seen a video yet of ,a 2025r and a 2036r side by side comparison on anyone's channel.I know the 2 have different frames all together.Given your height so I can see the size of the tractor.From my perspective I'd like to have a longer wheel based tractor possibly an air ride seat.To comfort my back thank you ...Where I live we have a JD but they only have a limited inventory of units,'d have to drive a distance to see for myself and the weather is terrible at this given time.
Have you gotten to see the 2025R and 2038R compared yet??
Subscribed. Not sure if you have the capability to do this, but I'd love to see a comparison between a 2025R & B2601.
If we can get our hands on a B2601 we will do this! Thanks for watching!
I'd really enjoy seeing a 2038R backhoe demonstration. Otherwise nice video.
Bill we will try and get that on the list of videos to film. Thanks for watching.
great vid was the seat all the way back im asking because i a big guy any info would be great thanks Mark
Well I cant honestly remember since we shit this video so far back. I can say I'm a bigger guy and I fit comfortably on these tractors.
Looking for a good used 2032r, what should I expect to pay for one. Range?? Thanks!
Brint, Hope I spelled that right, I hope You'll take a minute and answer me on this. I found a 2014 2032 with 1044 hrs on it. Salesman says it has been well taken care of by the service record. I got them down to 18K , would that be good buy or could it be lower?? I'm serious about it. And could go some more then my offer of 15K. Thanks for any help. Dave
Guess he was to busy, Never got a reply.
What is the rear end housing constructed of? IS this a cast aluminum model or are we talking cast iron or cast steel?
This is die cast aluminum. Pretty common in compact tractors.
@@WesternEquipment I was reluctant to accept the cast aluminum but apparently that's stronger and cools better than cast iron so I dunno.
im still on the fence on what brand to buy. But I think you were really trying hard to find selling points on this machine. Seat, and color of levers ?
I feel like operator comfort is a big seller, especially if somebody is going to be using the machine for an extended period of time. The lever color is to show the ease of use. I don't feel like these were a stretch, in my opinion they are very important.
So what’s the difference between this and the 2038 besides horsepower.
That is really the only difference.
Western Equipment
Thanks I was comparing the two
Looks like lower price of this one then the 2038 .
Since all is same but horsepower which is not much difference for me .
oh, I thought that hole in the seat was a fart hole
Looks like it had a second purpose we didn’t know about!
Isn’t the fart hole part of the driver and not the tractor?
Well, you GOTTA show it DOING something!?!?
True, we should have done that. Next time I will. Thanks!
Can you actually work on it yourself?
Of course! John Deere offers service manuals for all of their equipment!
Uh no, you can’t. You can maintain it. But not repair it.
this is why I clicked on this video. Crony capitalism from John Deer with no right to repiar