PSAD SITUATION 27: Truss Subject to Moving Loads (Influence Lines on Truss)

Поделиться
HTML-код
  • Опубликовано: 5 фев 2025
  • CELE Past Board Exam Problem
    Situation 27: Given: S = 4.3 m, θ = 45⁰
    1. Which of the following gives the maximum ordinate of the influence line for the force in member JK?
    A. -1.0 C. -0.5
    B. 1.0 D. 0.5
    2. Calculate the maximum force (kN) in member JK due to a moving highway truck load as follows:
    W1 = 19.6 kN
    W2 = 78.4 kN
    Distance between loads = 4.3 m
    A. 88.20 (T) C. 73.46 (T)
    B. 88.20 (C) D. 73.46 (C)
    3. Determine the maximum force (kN) in member JK due to moving highway lane load as follows:
    Uniformly distributed load = 9.35 kN/m
    Concentrated load = 116 kN
    A. 196.4 (T) C. 181.48 (C)
    B. 196.4 (C) D. 181.48 (T)
    Thanks for watching!
    Comment for questions and suggestions for future lecture in this series.
    Subscribe and hit the bell button to be notified for future posts.
    #civilengineering #boardexam #engineering #structuralanalysis #structuralengineering #CivilEngineeringLicensureExamination #PRC #PSAD #theoryofstructures #influencelines #cele #steeldesign #staticsofrigidbodies #mechanicsofmaterials #strengthofmaterials #trusses #howetruss #methodofjoints #methodofsections

Комментарии • 10

  • @Prota-structure
    @Prota-structure 3 месяца назад +1

    Solid talaga mga vedios mo Sir👌. Thank you

    • @harfmiranda
      @harfmiranda  3 месяца назад +2

      Salamat sa panonood idol! Pashare nalang din sa iba. Hehe salamat!

  • @deliobalagapo32
    @deliobalagapo32 3 месяца назад

    Thank you very much, Engr/Sir Harf! Very helpful to self-reviewees like me..
    Please find time to create a video about Absolut Volume method of calculating materials in concrete.
    More power, Sir! 😊

    • @harfmiranda
      @harfmiranda  3 месяца назад

      Salamat po sa suggestion!

  • @alnashierrubio7223
    @alnashierrubio7223 3 месяца назад

    Thank you sir. Big help po

  • @annabelleroa1944
    @annabelleroa1944 3 месяца назад

    Thank you sir harf

  • @JohnMartinNavales
    @JohnMartinNavales 3 месяца назад

    Bilib na talaga ako sayo boss.

  • @jhonarddelacruz7907
    @jhonarddelacruz7907 3 месяца назад

    Sir question lang po,
    Bale if, nassume ko na compression yung member JK postive ang mga answers pero yung magiging drawing ko ng shear diagram is downward, and sa final answer is consider compression as negative? Thanks po
    18:14

    • @harfmiranda
      @harfmiranda  3 месяца назад

      Ang influence line diagram po dito ay hindi shear diagram kundi axial force diagram nung member Jk. Sa influence line, by default tama na nasa ilalim ang compression at sa ibabaw ang tension. So kung inassume mo na compression, positive ang lalabas pero nasa ilalim padin po siya ng diagram. Hope this helps!

    • @jhonarddelacruz7907
      @jhonarddelacruz7907 3 месяца назад +1

      Thank you po sir, great help po sa mga nagrereview for board exam mga videos niyo. God bless you po ❤️