WEEBILL S SMOOTH SETTINGS // MY BEST WEEBILL S SETTINGS
HTML-код
- Опубликовано: 8 июл 2024
- Weebill S Smooth Settings - My Best Weebill S Settings. To get smooth footage with you weebill s gimbal. You need to adjust the weebill s custom settings. This is my Zhiyun weebill s settings for smooth gimbal footage. These Weebill S Smooth Settings will transform you zhiyun weebill s gimbal.
I often get the question of what weebill s gimbal settings I use, and I have shown them in two previous weebill s videos. But not in a dedicated Weebill s smooth settings video, where I go over how to adjust the settings on your weebill s gimbal and what I think is the best weebill s settings for mirrorless cameras.
When setup you weebill s, you always have the option to auto-tune the gimbal, which is okay. But to get the most out of your zhiyun weebill s, you need to adjust the weebill s custom settings.
The gimbal does not have to be in sleep mode to adjust the weebill s custom settings. Once you have adjusted the weebill s smooth settings, you can micro-adjust for the perfect fit for your weebill s gimbal.
I have enclosed a pdf for download that will explain the settings.
geni.us/WeebillSCustomSetting
Here is my Weebill s series:
• Weebill S gimbal
If you are interested in any of the weebill s accessories that I use, You can see them in the links below.
Zhiyun Weebill S
geni.us/rsq4v
Zhiyun Weebill S Pro Pack
geni.us/OFNFA
Camera Quick release plate
geni.us/Jkqw
Zhiyun quick setup kit
geni.us/X65eJ
Gimbal Grip
geni.us/a0jJoT
Dual handle grip for gimbal
geni.us/NspqYn
PolarPro 77mm Variable ND
amzn.to/2AaDaBY
RUclips Creator Tools:
Tubebyddy:
www.Tubebuddy.com/makholm
Morningfame:
morningfa.me/invite/makholm
FullTimeFilmmaker:
courses.fulltimefilmmaker.com...
MY GEAR:
MAIN 6K CAMERA: geni.us/EV33Y9
SECOND 4K CAMERA: // geni.us/XmTCnS
FAVORITE LENS // amzn.to/2NGRmak
ON THE GO MIC // geni.us/k76p5
FAVORITE GIMBAL // geni.us/aFAP9
BEST CAMERA BAG // amzn.to/2Y7eOTI
BEST ACTION CAMERA // geni.us/A8bczDz
FAVORITE DRONE // geni.us/d9Fl2
SUPPORT MY CHANNEL // bit.ly/2Sk0EJw
SPECIAL THANKS TO // www.focusnordic.dk/
PANASONIC LUMIX S1H // bit.ly/2EGsMk9
Make sure you subscribe to my channel!
Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or a service with the links that I provide, I may receive a small commission that will help support this channel, so I can keep creating content each week. There is no additional charge to you. Thank you for the support; it is highly appreciated.
#weebillsSettings #weebillSSmooth #zhiyunweebills 
Кино
I have been working on this CRANE 3S DUAL GRIP for a couple of weeks, and it completely changes the way you work with you CRANE 3S
See all the benefits in the video here.
ruclips.net/video/T3Cf31ac_UA/видео.html
thank you so much you saved me with the deadband and the smoothness settings because ive been suffering from sudden movements from the panning now its perfect thank you again
Thank you Peter for sharing your custom settings and going through all that testing for us. Im still at the beginning with that gimbal but with your help Im sure I will learn more
Thaks mate. Glad to help.
Thanks again Peter,
For your dextrous ministrations, you excellence is continuing apace
Thanks Peter, Thats the video I have been waiting for👍🏻
You are welcome mate.
Extremely helpful video. Thank you, I keep coming back to your videos often. I myself make a lot of tutorial videos on music gear and I can appreciate someone that goes the extra mile like you do with your videos. Subscribed!
This is still so valuable in 2023! Thank you!
These settings are amazing, I will put them to the test tonight when filming. But I can already tell these are better settings than i was using! Shall update later!!
Thank you so much, Peter! These settings are perfect and my footage is smooth as! I haven't been able to achieve that before with my Weebill S.
thanks Makholm. I sold my Crane V2 with my settings and I had problems with weebill S but I had not time to test the settings. I'm wedding videomaker in Brazil
Your settings is very smoth. More than I expected. Thanks again
Always mate. I hope they will help you with your weddings. Stay safe...
Thanks for the settings! New Weebill-S owner & they are *_SO_* much smoother.
Perfect help - even after 3 years!
I'm set on the motor to auto, but all rest of the setting I followed yours, perfect match.
Thanks Peter! Liked your video a lot, saved me a lot of time!
Thankyou, Peter Makholm Its really informative.
Thanks, exactly what I was looking for! I have the Weebill 3 but still very helpful!
your a life saver bro
thanks for all the videos covering the Weebill s
Bodhi Csutoros always mate.
Thank mammothly much, Peter! Extremely helpful ‼️
You're very welcome!
When using an arca swiss quick release plate my Camera rises ofc and the lens support doesn't reach my sigma 18-35mm. Do you know a longer lens support version?
Man! Great settings. I tried these out and I like the sensitivity. 😄
Thank you its helpful 🥰
thanks, works fine also with crane 2s
awesome settings thankyou
Hey Peter. I just got the Weebill S for my birthday (thanks, family). Your video is perfectly timed as I jump down the rabbit hole of vlogging with a gimbal. My first question, of many, is which of the 6 gimbal film mode would you recommend to use when I’m walking/talking (selfie style)?
Thanks, great to hear. I would just use pf mode.
Peter Makholm thanks! 😆
thank you. i been trying several setting on my own and it somewhat bumpy. Your setting is smooth in all aspect.
Glad I could help
Another great video!
Thanks again!
Nice description!
Thank you so much for the video! Very helpful :-)
I'd say the deadband is how many degrees before it starts reacting, not how much time. Would you agree?
same same but different. Yes. degrees might have been the right term to use. Thanks mate.
Thanks!
amazing video. thanks for sharing you knowledge.
Glad it was helpful!
Tq so muchhhhh...i can understand clearly ♥️♥️♥️♥️♥️♥️♥️😍😍😍
Hi Peter, nice video, thanks! If I always use the same setting (camera, lens) do I have to auto-tune every time I power on and off? Or once is enough?
Hey, thanks for this helpful video but I still have a question. Is it normal that the Weebill S gets warm? The pan and roll axis legs are getting warm (not hot though) after some time, and I was wondering if that is normal or in some way is manageable by tweaking some settings? I used the auto-tune function and then did as you advised in your video (not saying the heat comes from these setting) :-)
Hi Peter! thanks for your video. I use this gimbal with a Sony A7iii + G Master 16-35 f2.8.
When I calibrate the gimbal with the lens at 16mm it does more weight forward than when I use it at 35mm. Is it possible to have a correct calibration that works for the entire focal length range? If I calibrate it at 16mm and then use it at 35, sometimes when I pan from above to the ground (using PF mode) the camera "droops" back a bit, as if it were put into Vortex mode. Do you have any suggestion?
Thanks for Good Tips=!
Hi Peter! Thank you for the great content on ypur channel. I've seen a lot of your YTs and have a tip for you. I have searched a lot on the YT without finding any good video of these (costum) settings for the Ronin RS 2 or RSC 2. I've bougt the RSC 2 and are playing with these settings. I've done the research, now it's up to you to make the video :) Hope to see a video with this content from you. Have a great day and keep up the good work!
Hi Peter, Thank you for your Tutorials! Do you use the Same Settings for the crane 2s? Since the newest update i have jitter issues! But i cant get the Older Firmware to my crane because i cant connect to my Mac.
wow thank u so much
Thanks a lot again! Hugs from Lisbon!
You are so welcome! Stay safe out there. Pete.
Thnx bro
Great video! Cheers! I think it’s time for me to play with the settings, as PF is way to sensitive for my shaky hands 🤣
Thanks bro
Peter, I know this has nothing to do with gimbals, but you should add a backlight to make yourself stand out from the background. It would look so nice.
tnx bro
You are welcome mate.
Hello thanks for the explanations! Can you make a video explaining the function of your Tracking with the Panasonic Lumix S5,please?!
Help ful
Hi Peter and thank you for your time Im having some issue with my weebill s first I need to manual adjust the horizontal level by Roll Angle for 2 degree and second when tilting up with the joystick after 45 degree it loose horizontal level again. Is that something common or my gimbal is faulty. Thanks
Got mine in the mail yesterday, video on my channel. Great Video though!🔥
sweet mate. enjoy it.
Hey, I want my Weebill to behave just like my DJI Osmo Pocket. Do you have advice on what values the speed, deadband, ... have to be to come close?
Thanks for the helpful video.
Please do not forget to engage the hi-pass (50-60 hz) filter/eq setting on your voice, still got some runaway rumbles ; )
Best regards 🖖
Yeah thanks mate. My problem is that my office has 5m high seelings, but I am work is in progress to fix it
nice one
thanks , some times recording is off signal connect with weebill s ?
It’s really helpful when you bring your experience which is way more than basic tips. The best knowledge of weebill s. I have a question: I’m using your settings and My setup is light, just a7III 24mm 1.4 GM. Should I set less strength on motors? To avoid the ‘gitters’
Yes. I would belive so. Your camera is lighter and you don't need that much power going to the motors. I would try reducing the numbers.
Hi Peter
I’m on the latest weebill firmware + the quick release as you recommend + the rode mic on top + your weebill recommenced settings
This set up actually pushes the mic too high and it touches the axis when I go into sling mode , the motor also seems to be a little shaky even without the mic so I think it’s not perfectly balance ?
Hi I would never put the mic on top of the camera, unelss you have a cage and can get the mic out to the side so it wont interfer with the backarm of the gimbal. If you get vibrations in any of the motors, adjust the settings until the vibrations are gone. You proberly will have to lover them a bit.
wtf.. Troede aldrig jeg ville finde en film making related RUclips kanal fra en dansker.. Var så forvirret over jeg kunne høre du var dansker, da jeg ikke tænkte der var chance for det haha
Men får bestilt præcis denne stabilizer idag, and keep up the great work! :)
Mikkel Pedersen Hey Mikkel. Det er korrekt. Fedt af høre fra en dansk seer her på kanalen. Held og lykke med din weebill S.
Hi Peter, which gimbal mode do you recommend for dancing video?
Hi please tell me what is the names of 2 separate top and side grip
my weebill s always seems to start tilting to one side, how do i straighten it out? the old zhiyun crane models would rotate a little right or left with the joystick, now that just pans and i cant get the shots to stop being off axis.
I've been noticing a bit of shake in basic movements with the default settings, so hopefully, these make a difference!
I am having the same issues with myy weebill S please let me know if it helped
@@twill_ch1647 getting dual handle grip helps a ton
hello, thanks for the videos. can the wheebil S carry a big dslr like the canon 1dx mark ii or a mirorless with a battery grip like the eos r.
thanks
It can carry the weight, but the camera is way to big. you need a crane 3s.
Will you do a video of the Crane 3S with the dual handle you had on it in the video
Yes. I am currently working on it.
Hi, will you be doing a video for the Crane 2S settings in the near future? or would you recommend using the same settings as the Weebill?
Yes I will do a video, the motor settings are set super low, but most of the advanced setting are the same. I am currently testing the setting and I have adjusted them a bit. I am also in contact with Zhiyun regarding the motor settings that are so low that they cant be adjusted. So video coming up
Smooth is actually how it eases in and out when controlled with the joystick
And the higher the number the lower the smoothness, the lower the number the higher the smoothness
@MovieFreak News I no longer have it, but yeah, try it and see
You're right
I thought my gimbal was defective. Didn’t save any of the settings I entered after turning it off. Thank you for this info.
Thanks mate great tips... I'd like to ask that my joystick does not move left to right.. Up and down is ok but I could not figure why it does not move left or right
It depends on what mode you are in
@@PeterMakholm PF
@@EE-zx1pr In PF MODE you can only go up and down.
Hi. Need the weebil s settings. My gimbal seems to he very shaky even while walking. I have 2.05 update installed. U can share the settings. I will be able to
Do it myself
I’m looking at picking up the S1H soon and I have this gimbal. Any problems balancing the S1H with a sigma 18-35 on the weebill s?
That is not possible. The S1H is too big and heavy, for the weebill S
The S1H is to big for the Weebill S. You will need a crane 3 lab or crane 3s.
@@bymakholm5358 would Nikon D850+Nikon 16-35 work on Weebill S?
maybe you got the magic combination settings to avoid the horrible roll motor wobbling i will give a try! thanks for this info
Hopfully it will work for you. if you get motor vibrations, turn down the motor strength.
@@PeterMakholm i just got a little horizon wobble even walking super carefully, i see is a typical problem for many users, i will test if can be fixed by calibration or with your custom settings
Alex Timelapse did you fix it? Having the same issue
Please for crane 2s best settings
Hi Peter... I have some issues with my horizontal line .. not perfect.. already did six side calibration... and the settings is the same of yours... do you think can i do something to fix that? when i do a lateral movement, i lost the green horizontal line ... thanks for all your videos.. helping me a lot
Hey. Go in to the menu of the weebill s and adjust your horizon. Press: menu - angle - roll. And adjust your roll axis.
@@PeterMakholm i did... but i mean when i make some movement and lose the green line.. but he is back to the center after stop the movement
... maybe normal... right?
@@artmktadvertising yes that is normal. but the the less you can get the green line to move the better you are at operating the gimbal.
Peter, did you ever identify a set of settings for the Weebill S using firmware 2.05, or did you move on to using the Weebill 2?
I still use the same settings.
Nice video Peter, could you tell me please how can I get the big rig weebill S handle you are using there??? thanks a lot and good luck!!!
Thanks, yes this is the one you are looking for. amzn.to/3eZu2ib
@@PeterMakholm thanks bro!
I really love your job man I'm considering to get the weebill s gimble but I've heard about some broken lock mechanisms on it...
Should I be worried about it? Really apreciate your comments here.
Can anyone help me! I am using same settings but everytime I switch to Go mode motors go crazy if pitch down. Is it normal?
Also, why ZY PLAY APP keeps on disconnecting, do I need to update to latest firmware 😕😕
Thank you for putting a link to the dual handles in the description. Will you ever do a video review of the dual handle with the Weebill S? Does it help a lot?
I actualy don't use the dual hande with the weebill s. Only with the crane 3s and lab. Because i like the L side grib withe the weebill s. With that i Can reach the Follow focus wheel with my thumb.
Wooow, how did you get TILT motor strength 56. Mine is 5, and value above is causes vibrating of the gimbal, even if it is perfectly balanced. My gear is Sony a7s with Sigma 16mm. I'm still not satisfied of my video, it looks like shooting from hand. Unfortunately autotunes doesn't not works fine in my case. It always vibrating after I autotune. What goes wrong? Any suggestion how can I improve my settings?
Are these settings for all cameras?
I readjusted my settings to match yours exactly and the gimbal started to vibrate like crazy particularly on the upper tilt. Pan is painfully slow. Any Advise Peter?
If the tilt motor vibrates. Lower the motor settings. Try to auto tune first... Those settings might be good.
If the pan is too slow for you, adjust the follow settings.
Whenever I tilt my gimbal down with the joystick the motors getting loud and vibrating insanely..is this normal?
Thanks , the dual grip works fine?
It is so dope
There are some strange thumping noises present in the video. Just wanted to let you know. Good work!
allright thanks mate. It might be because i have the mic atached to my table. Will be fixed.
5:09 - all important information
I’m having issues with Weebill S horizon being off. I heard that 6 side calibration would fix it. I’ve never done the 6 side calibration before but decided to do it. However, without a camera mounted on the gimbal, it vibrates very badly, even after auto tuning. I tried changing motor settings, but after a few minutes the gimbal went to sleep, I assume because the motors overheated. Any thoughts/ideas about how to overcome this? How can I calibrate it while it’s vibrating, and will calibrating it fix the horizon problem. I’d like to reset to factory settings but I can’t find a way to do that, and I don’t know what the original settings were. BTW, it’s been upgraded to the latest firmware as of last week.
Hi, Send me an email to peter@thegimbalacademy.com and i will send you a guide.
Hold the POV button and put the gimbal into sleep mode. Then do the calibration.
My Weebill S starts spinning and vibrating as soon as I turn it on... what can I do? I even balanced perfectly.
depends on your weightload, try differnt motor levels, if you choose the right one, everything is fine 👍🏼
why does the settings won´t apply to POV mode?
Not working with the Sony a7iii. Software seems to be "beta" at best, is confusing and the movements don't approach anything that the DJI products can do quite easily. Sorry, I tried. Sent it back in exchange for DJI.
I just realized that in this video at random points there's a very very deep bass sound I'm not sure why
edit: if you're looking for it one of them is at 2:32
Sir my joystick not working..& every 5..10 second show exis lock.
nikon d750 + 80 - 200F2 = 2kilogram 200 grams , Zhiyun weeball S will it work ??????????
THat lens is too long. It will never work properly
Whatever peter will do i will do 🙏
having the smothness at 50 or 200 seems to be the same for me. The ease-in and ease-out is always harsh...
This is the same issue I've been struggling with for quite some time. I need a quick-ish panning speed, but the ease in and out is so harsh!
4:48 6, 5, 8
my Weebill s starts spinning like crazy when I turn it on. Any ideas why?
What firmware are you on.
@@PeterMakholm I just updated it to the latest firmware. It still does it
@@PeterMakholm 2.02 !
it actually stopped spinning, but now it won't look straight. It seems like the pan axis is not set to look straight? is this a firmware problem? when I tap the trigger to make it look straight, it adjusts to look diagonal.
Using high quality headphones to watch this you have a low frequency rumble every time you put your arm/elbow on the table, cut the audio at 65-75hrtz
Yea, had the mic mounted to the edge of the table, just moved it to a stand. thanks for letting me know.
I know right, it was freaking me out!
3:29
1:38 56, 66, 80
Why it’s vibrating??? 😦😦😦😦
Please Tell me...
What is wibrating?
@@PeterMakholm Does the gimbal vibrate while making settings?
Would have given the thumbs up on this one if it weren't for the unnecessary random bass thuds in the audio!
what do you mean best setting, there is no best setting for that, its depend to your camera and lenses due the weight. damn ass best setting my ass