🔨🔨🔨DIY Laser Cutter Enclosure for the Atzer P20 Laser with Extension!🔨🔨🔨

#Lasercutter #Laser Enclosure #diyprojects
Hey Everyone,
I’m Carolyn from Tranquil Mentor and today we are going to be showing you our DIY Laser cutter Enclosure for the Atzer P20 Laser Cutter with Extension.
We got our inspiration from Clack Shack, Vintauri and Valley Forged on RUclips. We’ll link their videos below.
The enclosure is made with ¾ inch MDF from Home Depot and secured together with pocket holes and screws made with the Kreg Jig
.
The entire enclosure is 60 inches long, 32 inches deep and about 23 inches high.
The doors are 27.5 inches each x 20.5 inches tall.
Also, the bottom is ¾ inch MDF which we attached with corner brackets. Then we made a spoil board with the ¾ inch MDF as well. It’s heavy and that’s why we used the 2 x 4's and heavy-duty wheels for the cart.
The orange safety acrylic is from Jtechphotonics.com and the acrylic is -OD3+ laser filtering from 250nm to 520nm and 1/8″ thick, the dimension are about inches x 12 inches.
Of course don’t take our word for what is safe with a laser, always do your own research .. we did our research and decided to use this safety acrylic. This is not instead of safety glasses. Always practice safety and do not leave a laser project running without watching over it! It's always good practice to have a fire extinguisher close to you just in case of an emergency!
RUclips Videos used for inspiration! Don't forget to visit these channels!
The Clack Shack - Is it BIG enough? my Atezr gets a new home - Enclosurezilla! • Is it BIG enough? my A...
Vintauri's Workshop- XTool D1 Diode Laser Enclosure and Honeycomb Bed
• XTool D1 DIY Laser Enc...
Valley Forged - DIY Enclosure for your Laser Cutter / Engraver (Under $50)
• DIY Enclosure for your...
*Some links below may be affiliate links to products. We may receive a small commission for purchases made through these links. It does not change the cost to you, but it is much appreciated and can help support our website and channel.
ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey - amzn.to/3YahpsD
ATEZR KE Extension Kit for Atezr P20 PlUS/V35 PLUS/P10 Combo Laser Engraver, Expand Laser Engraving Area to 33.5" x 17" for Laser Engraver and Cutter Machine - amzn.to/3QzuQ3F
4 inch caster wheels for cart - amzn.to/43UeFAY
Kreg KPHJ520PRO Pocket-Hole Jig - Durable Kreg Pocket-Hole Jig - Easy Clamping & Adjusting - Includes 360-Degree Rotating Handle - With Pocket-Hole Screws - For Materials 1/2" to 1 1/2" Thick - amzn.to/3OgAQLN
Frog Tape - amzn.to/3dGphiB
CREDITS
Music Credits -
Tropic by French Fuse
Graphics Credits -
Vecteezy.com for the floating hearts
RUclips Thumbnail - Kittl
Want to Design like a pro or are you a pro already?….check out the Kittl design program - kittl.pxf.io/c....
DISCLAIMER: We are a participant in several affiliate/influencer programs that enable us to earn a commission when you click on our links and make a purchase. You don't pay anything extra for the items you buy...we just get credit for referring you!
Please note that all projects seen on our channel must be completed at your own risk. We do not take responsibility for any harm or injury that may occur. Always do your own research before doing any projects.
And always consult with your health care practitioner before taking this information as health care advice. The opinions on our channel and website are based on experience and personal views. Please be careful!
VIDEO RECORDING GEAR
2 Fovitec fluorescent Studio Lights - amzn.to/3AwtrlJ
GoPro Hero 9 Black Waterproof Camera - amzn.to/3zYJirS
Regetek 81 inch Camera Tripod - amzn.to/3ChydF4
Joby GripTight GorillaPod PRO 2 - amzn.to/3CiAFLG
AMER Dual LCD LED Monitor Desk Mount Stand - amzn.to/3SY6Y8l
USB Microphone MAONO 192KHZ/24Bit - amzn.to/3c2o4BA

[@rooseveltmoen]

'promo sm'

[@tranquilmentor]

Thanks for watching! We appreciate your kind comment!