It’s actually a very well written and comprehensive book ruclips.net/user/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 . I wanted to pair this with an updated book on local codes to start planning a post-retirement dream shop. I think I have just about everything I need between the two. The extra plans available for purchase towards the end are priced almost as much as full home plans, not little sheds however.
Davor - In the U.S. we call them a Sliding T Bevel Square. Also you should be able to find one at most home supply stores and definitely on Amazon. Here is a link to one at Home Depot... www.homedepot.com/p/Empire-True-Blue-Heavy-Duty-Aluminum-T-Bevel-132/202035310?MERCH=REC-_-PIPHorizontal2_rr-_-100353824-_-202035310-_-N
Well, the insulation material that he used will cut down on the air conditioning and heating cost of the house. I can't tell if the siding is vinyl or aluminum, but aluminum gets hot fast
You still need to attach the batons as you must have ait flow behind the cladding. If you screw the cladding directly flat onto existing timber you will have no airflow and will encourage damp problems.
He put a layer of water proof paper over it to keep out moisture, but I had the same thought. He doesn't seem to be concerned about angles of the siding to be slanted to help drainage. Maybe they have little rain in his location. Also, he failed to caulk the seams between the panels.
He's doing a great job but...this cladding is plastic. How can we still be using plastic in this way knowing what we do about the environmental disaster it causes?
late reply. It's not causing environmental disaster. Why are ppl acting as if plastic is toxic or something. it just doesn't biodegrade in reasonable time period. To speed up the process you can dump all plastic on tall mountain for example. 🤷♂
@@kasparsjansons9220 putting it on a mountain would slow the process down of it breaking down. Plastic is terrible because it chokes the ecosystems where its left. Youre lucky enough to live in a 1st world country, you dont see the problems. Step outside to a poor country and dam, plastic pollution is one of the biggest problems youll face.
Yes the sides weigh next to nothing they don't need hefty fixings and the cladding itself is being fixed with 40mm screws it's solid it's only really going into the sides to make a nice looking joint...
Extremely professional. Thanks for your post!
ruclips.net/video/W5xleU3rm0I/видео.html
It’s actually a very well written and comprehensive book ruclips.net/user/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 . I wanted to pair this with an updated book on local codes to start planning a post-retirement dream shop. I think I have just about everything I need between the two. The extra plans available for purchase towards the end are priced almost as much as full home plans, not little sheds however.
The soundtrack rules 🤘
I want to marry this man lol :) Such a pleasure to watch doing this. Such clean neat skill. Truly brilliant :)
Nooo!! He is mine!
No worry please!! One of you can marry him, and the other can marry me!! I am a serious man 37 years old. LoL 🌹🌹
looks so clean👌
That music is amazing! Made me watch the entire video just to listen to it! Nice Jazzy Afro Centric Beats!
ruclips.net/video/W5xleU3rm0I/видео.html
Yes, Good work to follow through on this job
Fantastic work and perfect support music.
Surely joints should sit half way on batterns?
Will there be thermal bridging were the horizontal timbers are fixed ?
Good work
Cracking job, looks great.
Ganon pala yon.ayos ah..thank you for sharing
How do you protect the bottom of a shed?
I love the music in this video. Who is playing?
It's just a royalty-free track we found called Tiki Room Rendezvous by Lee Rosevere
love it too :)
Thank you for getting back to me. I will sure look it up. Great work too.
Damn it, don't you just hate it when someone beats you to the same question
so satisfying
Muy bueno.bien explicado.gracias
Shouldn’t you tape the overlapping wrap?
Brilliant indeed.
Video au top merci
Dry wall screws for exterior work?
Est se que sa marche sur du crépi ?
hola lo que pasa es que quiero adquirir una de batería y observe que la que tu usaste es de batería y me gustaría una
gracias
It would have looked a lot cleaner if he hadn’t used the trims round the gable
Hardly understood what I was watching.... but love to learn.
Do you just but them up together? Or are there joining pieces?
you can get a joint
U make it look to easy
Very good
How do fix some thing to the wall with out creasing the plastic say a radiator or a mirror
U are badass
anyone else find it funny on vinyl siding they put a wood grain pattern on that makes it appear an an inferior wood siding product?
What the name of the tool on 0.53 min of this video and where to buy it online? Thank you
bevel square.
Keep shtum about them ...or everyone will want one.
Davor - In the U.S. we call them a Sliding T Bevel Square. Also you should be able to find one at most home supply stores and definitely on Amazon. Here is a link to one at Home Depot...
www.homedepot.com/p/Empire-True-Blue-Heavy-Duty-Aluminum-T-Bevel-132/202035310?MERCH=REC-_-PIPHorizontal2_rr-_-100353824-_-202035310-_-N
is getting tongue and groove cladding worth it
I wish it was that easy
Looks like it pays well... interesting
hola la grapadora que usas es manual o de batería
Cualquiera esta bien
Juan Castañeda
잘보고있어요
유익하네요
hello my friend can you tell is this UPVC panels
They are indeed made of PVC.
I have experience working with cladding, do you need a professional?
2:38 you may as well have clad it with sawn battens.
Well, the insulation material that he used will cut down on the air conditioning and heating cost of the house. I can't tell if the siding is vinyl or aluminum, but aluminum gets hot fast
ruclips.net/video/W5xleU3rm0I/видео.html
What if the wall is made of wood. Then there is no need for the initial wood you attached to the wall?
You still need to attach the batons as you must have ait flow behind the cladding. If you screw the cladding directly flat onto existing timber you will have no airflow and will encourage damp problems.
good job
That insulation is going to soak up the rain that gets in nicely.
He put a layer of water proof paper over it to keep out moisture, but I had the same thought. He doesn't seem to be concerned about angles of the siding to be slanted to help drainage. Maybe they have little rain in his location. Also, he failed to caulk the seams between the panels.
Is it flame resistant, don't want grenfell tower again
Yes it is a fire rated cladding product, which has been given a D-s3, d2/AHM classification according to European standards.
How much does it cost
stay connected thumbs up
very nice
Strange that your written instructions are way different to this. And spending half the video showing battering?
Cool
can somebody tell me what is the name of that hand saw to cut the cladding ? thanks
It's called an angle grinder
Look at his fucking tape measure.. this guy have no clue what real construction is
How can you Work with gloves?????😉😉😉😉
This is why million dollar homes cost two million !!
The wall is concrete? Why not just paint it?
ruclips.net/video/W5xleU3rm0I/видео.html
The whole point is that it's insulated.
gracias
Nagyon jó ès szèp
Is this available in America?
ruclips.net/video/W5xleU3rm0I/видео.html
You finesse that siding into submission
Insulation panels should have been anchored in the middle as well
Also wouldn't there be thermal bridging were the horizontal timbers are fixed. Timber as a higher u value than rockwool.
Super senks.
ruclips.net/video/W5xleU3rm0I/видео.html
Super...
Is this fire resistant?
Yes, Fortex is a fire rated cladding product, which has been given a D-s3, d2/AHM classification according to European standards.
0:13 right on the mark...
What the heck is he measuring with?
😆
It's a multi angle measuring ruler
work construccion
#1
Fitting horizontal external cladding
That's cool as
I like the tunes. 🤭
why wouldnt you just batten the wall out,why make the wall/eave smaller.looks like waste of time
harry walker looks like is for installation purposes
Good job ..but safety mask ...must be wearing 👍
ruclips.net/video/W5xleU3rm0I/видео.html
Ist das schwarze eine dampschperrfolie
Ja richtig
👌👌👌👏👏👏👏👏❤
This water resistend?
Yes it is, it's plastic so it can withstand all weather conditions!
el.ranchero
buenos.videos
construccion
manteb...brow
Rough finish
binakasan ko na
U same cladding after towel put my head
He's doing a great job but...this cladding is plastic. How can we still be using plastic in this way knowing what we do about the environmental disaster it causes?
Losts of upvc plastic companies use recycled plastics
ruclips.net/video/W5xleU3rm0I/видео.html
Heard of recycling?
late reply. It's not causing environmental disaster. Why are ppl acting as if plastic is toxic or something. it just doesn't biodegrade in reasonable time period. To speed up the process you can dump all plastic on tall mountain for example. 🤷♂
@@kasparsjansons9220 putting it on a mountain would slow the process down of it breaking down. Plastic is terrible because it chokes the ecosystems where its left. Youre lucky enough to live in a 1st world country, you dont see the problems. Step outside to a poor country and dam, plastic pollution is one of the biggest problems youll face.
فنان
hooyeh
No
I na górze docinka ostatniego panela zamiast przemierzyć i na dole najwyżej 2cm niżej skończyć.
OMG
Jaime b1 le bn traville
That looks horrible
🤣
Absolute waste of money time and resources
Joints are too obvious
rostende schrauben im Aussenbereich ???? Na danke !!!
Alul meg bemegy az egér.
Looks so cheap
U
What a waste of money and resources
Mask ??
Obd
En español
Mauvaise méthode pou enfoncer les chevilles a frapper .Super une maison en plastique .un bungalow quoi.
Среднее
B
Ĺ
So all that siding is held up by a handful of nail pins? Useless.
Yes the sides weigh next to nothing they don't need hefty fixings and the cladding itself is being fixed with 40mm screws it's solid it's only really going into the sides to make a nice looking joint...
LMAO it's FOAM!
You realize how much it weights?
ruclips.net/video/W5xleU3rm0I/видео.html
Nasty.