भाई आप की बात शत प्रतिशत सही है। जितने भी बिना ट्रांसफार्मर के इनवर्टर हैं सब चीन के बने हुए हैं। नाम इन्होंने अपना नाम दिया है। इनकी सर्विस बहुत खराब है। पार्ट्स नहीं मिलते हैं। सर्विस सेन्टर बहुत कम है। ऑनसाइट सर्विस बहुत कम या नहीं के बराबर है। मैं खुद भुक्त भोगी हूं। मेरे पास एक बैक अप इनवर्टर है उसी से काम चलता है। खराब होने से इन्वर्टर को मुंबई कोरियर करना पड़ता है। एक बार भेजने का खर्च ही 1700-1800 लग जाता है। इस से अच्छा है अपनी जरूरत के अनुसार आप के नजदीक जिस कम्पनी की अच्छी सर्विस हो उसी कम्पनी का इनवर्टर खरीदें।
Of all the ongrid inverters the top line inverters are Fronius, ABB, Sunnyboy, SMA, Abb, Delta, Fimer Then comes is Huawei, growatt, sofar, deye etc. Then is All others The above comparison is made not only on quality or service these companies provide but also on efficiency of inverters. In case you want a better option at a cheap price and good quality go with SOFAR or GROWATT Always remember to overload your inverter by 1.2 times PV DC Suppose your need is 3kw inverter but use panels of 4kw capacity. Your inverter will recover the input cost much earlier than using a 4kw inverter with 4kw panels. Remember 4kw panels can never generate 4kw power under normal conditions and hence your inverter will never go beyond the limits and thus will produce optimum energy
If suppose max DC voltage is 500V and you install 540W of 11 panels which produces 50 volts each in STC, it can still take but not advisable. But If you put 12 panels it might produce ~45-48volts in natural condition, then we cross 550-570volts, this is very dangerous and should not be done, unless you connect some panels in parellel.
Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Pretty surprising that most of the companies still have a trading mindset and not an R&D mindset...India cannot develop a manufacturing base with this mindset.
Not exactly! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Review of waree solar panels ? Also review of Pyramid electronics inverter ? Also can we put 10 kw inverter with 5 kwh solar panels ?? Please answer all 3 questions. Thanks !!
waree panels with which on grid inverter is best?. in chennai.. they promote havells polyccab rather than luminous and growatt.....want to put 3kw on grid.. suggest the combo....
Polycab and luminous are same. Havells and waree are manufectured by sofar. You can go with waree/growatt. Polycab ki bjaye aap solis lrnge to jyada better h kyunki solis hi polycan and luminous ko manufecture krke deta h
On grid inverter also available with waree. HAVELLS AND WAREE inverters are manufectured by SOFAR. You will get same inverter in havells and waree, with just color and logo diffrence
I am going to install 5kw setup in 2 days, adani topcon bifacial.. can you suggest which will be the best inverter for it ? it will be ONgrid system. please suggest.. Thank you.
@@ashvinisharma3802 it is costing me 2.85 lacs for 5kw setup, panels are adani ELAN SHINE 565 watt bifacial topcon panels. i will get 78000 subsidy after 2 months.
Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Chinese hi hai. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
not good reviews. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
ab aisa nahi hai. new inverter aaya hai ek fully made in india - software hardware sab kuch! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
I didn't meant that chinese products are bad. I am also clearing the doubt bw indian and Chinese products. Some people think if its made in china, its not a good product.
it's all about service and availability of parts in local market, not about Chinese or Indian, try to understand, why we prefer our locally made products.
@@ankurpatel4368 wrong. Indian products can never be Good. It's only the Indian EGo that plays in saying Indian products are good. I did is 50 years behind than china.
Adani ka Solar system kaisa rahega 3 kw ke liye aur on grid inverter ksolar company ki mil rahi usme please suggest thik rahega ye ya koi aur behtar company hoga kya isase?
sahi keh rahe hain., woh bhi sirf assembling karte hain. ek baar yeh dekhiye, poora 100% made in india! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Boss ye information public ko batane se kya fayda Bahut sari company hai jo aise hi chalti hai Har bade brand me koi ek OEM hota hai Brand wale marketing karke sale karte hai
nahi sabke case mein aisa nahi hai, global quality ka naya on-grid solar inverter aaya hai. Software hardware sab indian hai. Poori indian design in-house. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned? Issues with Foreign OEMs: Delayed aftersales Unavailable spares Slow resolution times Less innovation Unsuitable for Indian weather Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter! Why Choose Made-in-India ENERGIAA - X3? 💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert. 🖥 Local Software Development: Built in-house by Statcon Energiaa. 🏭 End-to-End Manufacturing: Entirely produced in our Indian factory. 🔍 Rigorous Testing: Tailored for Indian weather conditions. 🛠 Rapid Aftersales Support: Quick resolution and spare parts availability. Check out our production assembly line below! 🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html 🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
भाई आप की बात शत प्रतिशत सही है। जितने भी बिना ट्रांसफार्मर के इनवर्टर हैं सब चीन के बने हुए हैं। नाम इन्होंने अपना नाम दिया है। इनकी सर्विस बहुत खराब है। पार्ट्स नहीं मिलते हैं। सर्विस सेन्टर बहुत कम है। ऑनसाइट सर्विस बहुत कम या नहीं के बराबर है। मैं खुद भुक्त भोगी हूं। मेरे पास एक बैक अप इनवर्टर है उसी से काम चलता है। खराब होने से इन्वर्टर को मुंबई कोरियर करना पड़ता है। एक बार भेजने का खर्च ही 1700-1800 लग जाता है। इस से अच्छा है अपनी जरूरत के अनुसार आप के नजदीक जिस कम्पनी की अच्छी सर्विस हो उसी कम्पनी का इनवर्टर खरीदें।
ruclips.net/video/84W46q2oCR8/видео.html
Well said, more people should raise their voice against this
Excellent! Thanks for information.
Very important topic👌👌
Nice information
Great
Of all the ongrid inverters the top line inverters are
Fronius, ABB, Sunnyboy, SMA, Abb,
Delta, Fimer
Then comes is
Huawei, growatt, sofar, deye etc.
Then is
All others
The above comparison is made not only on quality or service these companies provide but also on efficiency of inverters.
In case you want a better option at a cheap price and good quality go with
SOFAR or GROWATT
Always remember to overload your inverter by 1.2 times PV DC
Suppose your need is 3kw inverter but use panels of 4kw capacity. Your inverter will recover the input cost much earlier than using a 4kw inverter with 4kw panels.
Remember 4kw panels can never generate 4kw power under normal conditions and hence your inverter will never go beyond the limits and thus will produce optimum energy
how do you know that??
what is the source of your knowledge??
Dear you are having superb knowledge. Great going.
If suppose max DC voltage is 500V and you install 540W of 11 panels which produces 50 volts each in STC, it can still take but not advisable. But If you put 12 panels it might produce ~45-48volts in natural condition, then we cross 550-570volts, this is very dangerous and should not be done, unless you connect some panels in parellel.
👌👌 thanku
Nice
Eastmann and ksoalr aur luminus 5kva konsa lagaye.
100/💯 right । साथ में नेक्सस सोलर का भी नाम जोड़ लेना।।
Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
UTL ka inverter kaisa hai? Plz respond🙏
Goodwe ka invter kesa rahega?
Bhai sungrow ka inverter 3kw ke loye best h kya kya price rhegi iski ?
Solar inverter ki bahut video dekhi lekin muje tho best cellcronic hi lgga features bahut h dual output 9kw solar panel 6kw load hybrid
Good information
K solar ka inverter kaisa hai aapke hisab se
Hitachi ka ongrid solar inverter kesa hai?
HAVELLS VS LUMINOUS KAUN SA INVERTER BADHIYA HAI
Pretty surprising that most of the companies still have a trading mindset and not an R&D mindset...India cannot develop a manufacturing base with this mindset.
Sofar is the main supplier of all indian inverters.
Not exactly! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
What about K Solare Invertor ?
Solaryaan inverter and waaree main se best konsa hai?
Waree
530 watt ke bifacial panels ke liye kaunsa inverter use kre?
Deye /anchor/ havells/growatt etc
All are good brands
Radius inverter is the first indian inverter of rishabh instrument uske service kase hai
Help me decide between Solis and Growatt. it is for 3kw panel with 3kw inverter.
Both are good. But solis offer better quality and best after sales service in industry. You will get 5 year warranty on solis and 7/8 year in growatt.
Review of waree solar panels ?
Also review of Pyramid electronics inverter ?
Also can we put 10 kw inverter with 5 kwh solar panels ??
Please answer all 3 questions.
Thanks !!
Waree is a good brand.
Go for any reputed inverter brand,
Yes you can put 5 kw solar panels on 10 ke inverter
waree panels with which on grid inverter is best?. in chennai.. they promote havells polyccab rather than luminous and growatt.....want to put 3kw on grid.. suggest the combo....
Polycab and luminous are same. Havells and waree are manufectured by sofar. You can go with waree/growatt. Polycab ki bjaye aap solis lrnge to jyada better h kyunki solis hi polycan and luminous ko manufecture krke deta h
@@techmansukhpal u mean to say.. can go for waree panels. and ...regarding inverter.. which one. please reply in english.
On grid inverter also available with waree. HAVELLS AND WAREE inverters are manufectured by SOFAR. You will get same inverter in havells and waree, with just color and logo diffrence
I am going to install 5kw setup in 2 days, adani topcon bifacial.. can you suggest which will be the best inverter for it ? it will be ONgrid system. please suggest.. Thank you.
Price of adani topcon panel per watt ?
@@ashvinisharma3802 it is costing me 2.85 lacs for 5kw setup, panels are adani ELAN SHINE 565 watt bifacial topcon panels. i will get 78000 subsidy after 2 months.
Muza 4kv ka 3 on grid invartarchahiya
Tata solar on greed self inverter manufacturing karti hai kya ?
Nhi Tata goodwe Ka use krti hai or solar panel Waaree se manufacture krwati
Sir,nexus mppt pcu ke bare me bataye.
भाई ये तों इंडिया की सबसे फ्राड कंपनी है ये कुछ भी नहीं बनाते सब चाइनीज है केवल लोगो नेक्स्ट का लगाते है
@@jeanswoldgzp sahi keh rahe hain
Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
22 best inverter kon sa ha mara 22
भाई जी 3kw ongrid inverter सबसे सस्ता और बढ़िया कौनसी कंपनी का है 🙏🙏
How is deye single phase 1 mptt ?
Chinese hi hai. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Sungrow inverter is best.
Cellcronic hybrid inverter kese h service and reviews ???
not good reviews. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
भाई साहब आपने सभी कंपनियां सोलर पीसीयू नहीं बनाती है तो फिर कौन सी कंपनी बनाती है
Microtek ka inverter??
None of the Indian companies manufacture ongrid solar inverter. It's just thappa made in india.
ab aisa nahi hai. new inverter aaya hai ek fully made in india - software hardware sab kuch! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Solar Inverter Kaunsa accha hai, Polycab (7 years Warranty) or Solis (5 years Warranty) ?
Polycab inverters are manufectured aby Solis. Both are same, just brand name and logo diffrence.
Made in china is better than made in India.
Sometimes it is important to keep our ego aside and think wisely.
I didn't meant that chinese products are bad. I am also clearing the doubt bw indian and Chinese products. Some people think if its made in china, its not a good product.
@@techmansukhpal if this is the case then I would say you are a wise person
it's all about service and availability of parts in local market, not about Chinese or Indian, try to understand, why we prefer our locally made products.
@@ankurpatel4368 wrong. Indian products can never be Good. It's only the Indian EGo that plays in saying Indian products are good. I did is 50 years behind than china.
sofar vs growatt which is good in terms of quality?
Same but growatt is better
So instead of microtek(sofar) 10kw, I would choose anchor(growatt) over it for 530watt bifacial?
Don't go for growatt.
I am facing issues with growatt inverter.
It disconnect many times
China na hota to 95% indian jangle me shikaar krte
sahi bola chutiye
Bro i like to put 4.2 kilowat solar system with 4.5 kw inverter now can i later upgrade my panel to 5.2 kw in future without changing the inverter
Yes. Most inverters allow 30% DC over sizing. But Rated AC output will remain 4.5 kw as per inverter specification.
Adani ka Solar system kaisa rahega 3 kw ke liye aur on grid inverter ksolar company ki mil rahi usme please suggest thik rahega ye ya koi aur behtar company hoga kya isase?
Location kya h aapki
@@techmansukhpal Muzaffarpur Bihar
Ok. Ksolare inverter bhi acha h adani bhi acha h
Bs confirm kr lena k ksolare 8 year warranty wala ho
@@techmansukhpal haan 8 years bol rahe the
@@techmansukhpal aur koi isase achha ho sakta h kya
Ksolare bhi china ka inverter hai, made in india compney hai but sab chinese hai
sahi keh rahe hain., woh bhi sirf assembling karte hain. ek baar yeh dekhiye, poora 100% made in india! Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html
Boss ye information public ko batane se kya fayda
Bahut sari company hai jo aise hi chalti hai
Har bade brand me koi ek OEM hota hai
Brand wale marketing karke sale karte hai
Har kisi ko nhi pta hota.. Apko pta hai to achhi baat hai
nahi sabke case mein aisa nahi hai, global quality ka naya on-grid solar inverter aaya hai. Software hardware sab indian hai. Poori indian design in-house. Many suppliers claim their solar inverters are "Made-In-India," but they're often manufactured or designed abroad. What challenges does this pose for original manufacturing outside India? Should you be concerned?
Issues with Foreign OEMs:
Delayed aftersales
Unavailable spares
Slow resolution times
Less innovation
Unsuitable for Indian weather
Our Solution: Statcon Energiaa’s ENERGIAA - X3 On-Grid Solar Inverter!
Why Choose Made-in-India ENERGIAA - X3?
💡 In-House Design: Indigenous design by Statcon Energiaa, a 36-year Power Electronics expert.
🖥 Local Software Development: Built in-house by Statcon Energiaa.
🏭 End-to-End Manufacturing: Entirely produced in our Indian factory.
🔍 Rigorous Testing: Tailored for Indian weather conditions.
🛠 Rapid Aftersales Support: Quick resolution and spare parts availability.
Check out our production assembly line below!
🔗 Watch this video to see for yourself: ruclips.net/video/84W46q2oCR8/видео.html
🔗 Watch the first look: ruclips.net/video/iAL-FUrCPXs/видео.html