Mon cher Maître c'est toujours un plaisir de visionner vos vidéos ! 😍 Une telle qualité de précision dans la fabrication et surtout une finition irréprochable sont rares et je les apprécie tout particulièrement ! Merci pour ce partage Mes salutations respectueuses de Corse (France)
СМОТРЮ ВАШИ ВИДЕО (И УЧУСЬ В СВОИ 69 лет)! ВСЮ ЖИЗНЬ СЛУЖИЛ В АРМИИ, ВЫШЕЛ В ЗАПАС, А ЗАТЕМ И В ОТСТАВКУ И ТАК ЗАПАЛ НА СТОЛЯРНУЮ РАБОТУ!!! НЕ ПРОПУСКАЮ НИ ОДНОГО ВАШЕГО РОЛИКА, УЖЕ КОЕ-ЧТО СДЕЛАЛ С ВАШЕЙ ПОДАЧИ, СЕЙЧАС ДЕЛАЮ ВЕРСТАК, - ПОЛУЧАЕТСЯ!
Excelente tutorial maestro, un buen sistema de afilado, gracias por compartir sus conocimientos, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🔝
Cool simple project to get rid of the mess wet stones tend to produce. I'd probably add some handles to the water box to make insertion and removal easier. And with my wet stones I'd soak them in the water box before using. Thanks for sharing. Enjoyed it. Weekend Stuff
It depends on the type of stone you are using. Not all water stones need a soaking. Sometimes it is even bad for the stone because they become too soft and greasy
Great job as always. Do you think you can create something like the Tormek sharpener? Speed reduction, positioning rods, water canister... using some motor and sharpening disc. I think it would be a good project.
My favorite manufacturer is a saw made by Toritama Sangyo. amzn.to/3A9LUDo Ali Express has a fake Japanese saw. Please use genuine Japanese manufacturer's products.
Ok, I like this project. But what was this „saw machine“ all about that he has built in the former videos? I thought he‘d use it in his projects but no: he is using a regular Japanese saw for all of his cuts. That machine was such a waste of time… 😟😔 So much effort for just standing around in some corner…
Check out wood by wright’s vid on the joint maker pro for the thing jsk built before. This sharpening station, or a similar thing, is one of important things you should consider building when you like to use chisels and planes in your woodworking. It makes sharpening those blades much easier, making woodworking more fun cause you’re not frustrated with blunt blades.
@@weekendstuff yes, that was what i was thinking. keep the knobs below would work. with some inconveniences of having to flip it over to tighten or loosen them.
good job but, i am not a fan of the height of your stone...i prefer my sharpening stone more elevated, so my knuckles don't catch anywhere...you did not need to use 7 pieces of wood, 3 in the centre would have been OK..
My dude, turn the box 180° around and they magically are no longer in the way xD. Though in the rare case you want to sharpen something way longer than the stone, they do. Simple fix would be to get knobs that end up flush with the stone height I guess ?
No entiendo que teniendo una sierra circular, tenga que cortar las maderas con un serrucho.... nunca te quedaran los cantos tan escuadrados ni rectos como con la sierra
Дощечки... да чего там дощечки! Глядя на затраченные материалы, средства их добычи и обработки и энергию, чтобы поточить ножичек на камушке вручную (!) одно на ум - с такими идеями никаких ресурсов Земли не хватит и где эти пресловутые "зеленые", которые всё о сохранении природы визжат.
Love the Idea! Thanks for sharing. I‘m building this now 😊
Mon cher Maître c'est toujours un plaisir de visionner vos vidéos ! 😍
Une telle qualité de précision dans la fabrication et surtout une finition irréprochable sont rares et je les apprécie tout particulièrement !
Merci pour ce partage
Mes salutations respectueuses de Corse (France)
お見事です。出来上がった作品のスタイルがいい。スマートです。
СМОТРЮ ВАШИ ВИДЕО (И УЧУСЬ В СВОИ 69 лет)! ВСЮ ЖИЗНЬ СЛУЖИЛ В АРМИИ, ВЫШЕЛ В ЗАПАС, А ЗАТЕМ И В ОТСТАВКУ И ТАК ЗАПАЛ НА СТОЛЯРНУЮ РАБОТУ!!! НЕ ПРОПУСКАЮ НИ ОДНОГО ВАШЕГО РОЛИКА, УЖЕ КОЕ-ЧТО СДЕЛАЛ С ВАШЕЙ ПОДАЧИ, СЕЙЧАС ДЕЛАЮ ВЕРСТАК, - ПОЛУЧАЕТСЯ!
Excelente tutorial maestro, un buen sistema de afilado, gracias por compartir sus conocimientos, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🔝
Best ideas for this job,I enjoyed it,thank you for this video
Gracias por compartir tus conocimientos, felicidades por tu trabajo, bendiciones para usted y su familia, saludos cordiales 🖐️ desde Chile 🇨🇱
Cool simple project to get rid of the mess wet stones tend to produce. I'd probably add some handles to the water box to make insertion and removal easier. And with my wet stones I'd soak them in the water box before using. Thanks for sharing. Enjoyed it.
Weekend Stuff
I thought the exact same thing :-)
It depends on the type of stone you are using. Not all water stones need a soaking. Sometimes it is even bad for the stone because they become too soft and greasy
@@wolframherzog636 TBF I was commenting on the handle bit for the water box not the soaking of the stones, my bad.
Great idea my friend!!!
Really fantastic
I'm going to make one like this brilliant idea you have good man very great work
Can you one day show me an organizer stand for drill bits?
Очень, очень хорошо получилось. Отлично придумано.
Great job!! Very nice!! ❤❤
お仕事お疲れ様です
Amazing work, man! Nicely done! 😃
Stay safe there with your family! 🖖😊
Looks great I need one like that thank you
Simple but so perfect. Domo Arigato Sensei.
Excelente trabajo 👌👌👌...🇲🇽🇲🇽...
I am so making one of these!
I am happy to be of help to you.
ツバ無しの鬼目ナット使ってられますが、せっかく部材をドリルで貫通されているのですから、ビスの引き抜き方向と逆に鬼目ナットを向けられた方が抜け止め作用として有効になると思われます。
コメントありがとうございます。
＞＞ビスの引き抜き方向と逆に鬼目ナットを向けられた方が抜け止め作用として有効になると思われます。
ご指摘の件は４年前にすでに実証済みです。（鬼目ナットではありませんが・・・）
ruclips.net/video/nXpDwh37QHo/видео.html
鬼目ナットは正ねじですので、動画の通りに組み込めば、締めこめば締めこむほど抜けない方向に力が加わります。
逆向きに設置すると、ねじを締めこむほど鬼目ナットも入り込む方向に回ってきますので、理論上、そちらの方が抜けやすくなりますよ。
Great idea going to make one 👍
I hope you will share my videos with your friends!
Simple et efficace 👍👏😁
Buena idea como siempre
I have never seen this man make a mistake. I have been saving up big jugs of water for him to turn into wine.
Great job as always.
Do you think you can create something like the Tormek sharpener?
Speed reduction, positioning rods, water canister... using some motor and sharpening disc.
I think it would be a good project.
最近は作品がハイレベル続きでしたので
懐かしくもあり嬉しい動画でした。
過去作品の今技術でのリメイクは良い案ではないでしょうか？
毎回楽しみに見させていただいてます。
初期に作った物も、古くなってきましたし、改善点も見つかってきました。
これも少しだけ寸法を改良して使いやすくしました。
Excelente 👏🤌👍
作ってみます。
スノコ部は何mmの角材を使用していますか?
Super 👍👍👍👍👍👍👍👍👍👍
Would have thought you would have used your new fancy unpowered table saw to cut the wood at the start of the project rather than using a hand saw 🙂
Ikr 😞 … 😝
I immediately thought the same thing; especially since the cuts he highlighted in that video mirrored what he did here.
Good ii boss 👍👍😊😊😍
Cool project! What is the last item that goes into the box at the end?
water spray bottle
Excelente trabajo, como se llaman las sierras que utilizas? Gracias
São serrotes japoneses - procura por "japanese saw" no Ali Express. Principal característica é diferentmente dos ocidentais "cortar quando puxa" -.
@@ittamodotta muchas gracias
My favorite manufacturer is a saw made by Toritama Sangyo.
amzn.to/3A9LUDo
Ali Express has a fake Japanese saw.
Please use genuine Japanese manufacturer's products.
Where did you get your wet stones?
Ok, I like this project. But what was this „saw machine“ all about that he has built in the former videos? I thought he‘d use it in his projects but no: he is using a regular Japanese saw for all of his cuts. That machine was such a waste of time… 😟😔 So much effort for just standing around in some corner…
This is the first tool you should make in your woodwork.
It doesn't make sense unless you make it with the smallest tools.
Check out wood by wright’s vid on the joint maker pro for the thing jsk built before.
This sharpening station, or a similar thing, is one of important things you should consider building when you like to use chisels and planes in your woodworking. It makes sharpening those blades much easier, making woodworking more fun cause you’re not frustrated with blunt blades.
コンテナBOXは何処に売っていますか？
ホームセンターでは見かけないんですか？
コメント気が付きませんでした。
動画概要欄を見て下さい。
i think everything is perfect until the 2 knobs.
they would've blocked the hands and hindered the sharpening,
when trying to push the blade forward.
Turning the setup 180 deg solves this issue if it is one.
Weekend Stuff
@@weekendstuff yes, that was what i was thinking. keep the knobs below would work.
with some inconveniences of having to flip it over to tighten or loosen them.
good job but, i am not a fan of the height of your stone...i prefer my sharpening stone more elevated, so my knuckles don't catch anywhere...you did not need to use 7 pieces of wood, 3 in the centre would have been OK..
Anyone know of a similar plastic container box available in USA? The one in description is unavailable for me. Thanks!
In principle you can make watertight boxes from wood too.
They sell it on Amazon for $40 with free shipping.
@@abebeaku8369 Not in USA. It says it is unavailable when I go to the link in the description for the american amazon website.
The two knobs get in the way.
My dude, turn the box 180° around and they magically are no longer in the way xD. Though in the rare case you want to sharpen something way longer than the stone, they do. Simple fix would be to get knobs that end up flush with the stone height I guess ?
最後の方に塗ってる塗料はなんでしょうか。
ただのニスです。
2:40秒の隙間ジグ、６隙間×２で12分割すれば一気に行ける。
その通りですね。
Hi, can you let me know what stain / sealer are you using at 9:00? thx
Where to buy those whetstones?
No entiendo que teniendo una sierra circular, tenga que cortar las maderas con un serrucho.... nunca te quedaran los cantos tan escuadrados ni rectos como con la sierra
Если мастерская 150 кв.м., то пусть лежит где нибудь на самой верхней полке.
mantap
❤️🔥
👍
3:28 ... what wood is this ???
Walnut
@@jisakukobo thanks Bro 🙏
У мастера отпиленные дощечки упали на пол и возможно испачкались.Это фиаско братан .😃
Дощечки... да чего там дощечки! Глядя на затраченные материалы, средства их добычи и обработки и энергию, чтобы поточить ножичек на камушке вручную (!) одно на ум - с такими идеями никаких ресурсов Земли не хватит и где эти пресловутые "зеленые", которые всё о сохранении природы визжат.
@@polurich9968 бред
@@abebeaku8369 Ещё раз! Бред - это городить этот огромный таз из пластмассы и древесины, чтобы положить в него брусочек и поточить вручную ножичек.
👍👍👍👍
👍👍👍♥️
あなたは非常に複雑なものを作ることができますが、私はもっと単純で実用的な組み立てを切望していました.よくできました。
💯👍🏻👍🏻👍🏻
👍👍👍👍👍👍👍
영상 잘 봤습니다 또 오겠습니다!,.,.
Second! 👏👏👏👏👏👏
👍👍❤❤
😊👋👋👋
Show
👍🤝
First