I had seen this before and liked it. Well, it happened. I bought a design and omg, it had a bunch of wild jump stitches in it. Jeanette, you saved my project and mind! Thank you for your wisdom!
I am happy to have this tutorial removing the jumpstitch cos I am in the middle of doing a project with that problem and I don't like those jumpstitches. thanks thanks.
I succeeded today (10/16/2021) removing horrible and many jump stitches from a new design thanks to your teachings. Why oh why do the digitizers put them in and in such weird places? To me it's common sense to NOT put so many of these stitches in. But I just got them out thanks to Jeanette. Yay!
This is great to learn how to remove those jump stitches. I have one design in particular where the digitizer went crazy with jump stitches. The jump stitches were very long but stopped/stitched every 1/2" or less! There were awful to remove especially on towels. I do have a question though: how does the design then get to the next color without those jump stitches?
I appreciate this short video, lately the ones posted have been too long in the embroidery nich 😂. I just don’t have that attention span anymore. Ty! Bless you! 🤣
🤩🙏 tfs - this was fun & interesting to watch! Wondering if my little PE Brother embroidery machine has this capability if I buy the software 🤔 Time will tell & I’ll upgrade as needed. Thx again.
Hi Quiltedbrownie. It will be the same. The embroidery software is run on your computer. You transfer the design using your flash drive to the machine.
Hello from another Boricua by marriage !! This is great ! I'll have to try doing this myself. Thank you for the lesson. Where can I find that Mariah font you used?
Hi. Nice tut. Thanks. My problem is needing to insert a Stop (for a color change). I think your method of locating a specific area in the stitching using the Simulator will allow me to do this. Thanks. Fingers crossed. Thanks, too, for giving me the link to this vid. Much appreciated. ❤️
Yes you are correct. You should be able to insert a stop and change the color. Thinking I should find a design and create a video doing just that. I'm sure other people would love to learn this as well.
Thank you so much! May I ask, what about the thread type? For example, I had someone digitize an image for me. When I loaded it into Embrillance, The thread type was Wilcom but that thread choice was not available in my “thread” drop down. So now I have Wilcom on some stitches and Madeira on others. Will that be a problem?
Jeanette? what file do I use? I click on pes but the jump stich does not show. but I click the xxx file I see the the jump stitch. and I have a 4 x 4 brother machine? and I don't see my Gold frame that you have on the Embrillance 😩
Hi Eve, to see the hoop in embrillance you need to make sure to have this view on. You need to select View/Draw Hoop. This will display the hoop on your screen. I use the PES file. If you see the jump stitches then just follow the steps I do on the video. Be sure to STOP the stitch so the machine will do a try at the end of it.
@@BoricuaSewingCrafts See in View that I can click Jumps. In this Essentials, on applique, when I click where you say to click, then click stop then change color to black, the black continues forward, it doesn't change the before color like you show in embroidery sample. Also the jump stitch doesn't show up in my Property when I add the black, (well it shows the black that continues in the design.) My Essentials is up to date. Sure I’m not doing something. Love this video. Watched so many times! LOL
Great! Do you have a video on how to use 2 purchased designs to put together to make my own design? Your videos are so helpful. Thank you so much for doing them.
How about gaps between stitches Jeanette. It is so terrible when a design is beautifully stitched and there is a gap in it ruining the design. I know it is the digitizer's problem but is there a way or you can only do it in enthusiast. It's annoying.
I had seen this before and liked it. Well, it happened. I bought a design and omg, it had a bunch of wild jump stitches in it. Jeanette, you saved my project and mind! Thank you for your wisdom!
You are so welcome! Glad you found the video helpful. I hate it when I have a bunch of unnecessary jump stitches.
I cannot believe how good you are at this! I am going to have to practice getting rid of those jump stitches!
Thank you!! I'm a newbie and am a bit terrified to try this but I'll give it a shot! Well-done! Liked and subscribed!
Glad you like the video! Don't let fear stand in the way of learning!
I am happy to have this tutorial removing the jumpstitch cos I am in the middle of doing a project with that problem and I don't like those jumpstitches. thanks thanks.
You’re welcome 😊
I succeeded today (10/16/2021) removing horrible and many jump stitches from a new design thanks to your teachings. Why oh why do the digitizers put them in and in such weird places? To me it's common sense to NOT put so many of these stitches in. But I just got them out thanks to Jeanette. Yay!
Glad the video helped!
I’ve been struggling with this for a minute. Really appreciate your video. Boricua representando ✊🏽🇵🇷
HI Lexter glad the video was a help! Have fun sewing and embroidering!
I just tried this & it worked! Thank you so much for showing us how to do this!👏🏼🥰😍
Glad it helped!
thank you. I have some jump stitches that are a problem so I'll see if I can do what you did!
Glad the found the video helpful.
Love this video. Subbed.
Thanks for the sub!
Great video! Thanks so much for sharing this with us.
Thanks Cynthia! Glad you enjoyed it!
That does look much better. Thank you for your knowledge.
You are so welcome Bridget. Glad you like the video.
This is great to learn how to remove those jump stitches. I have one design in particular where the digitizer went crazy with jump stitches. The jump stitches were very long but stopped/stitched every 1/2" or less! There were awful to remove especially on towels. I do have a question though: how does the design then get to the next color without those jump stitches?
The machine stops and moves to the next location and chooses the next color without having to drag that other thread with it. :)
You have to make sure you add the stop. when you are removing the jump stitches.
Thank you so much for this! It is very helpful, and easy to understand!
Hi MsPresha412! I'm so glad the video was helpful! Have fun embroidering!
Thank you this video was extremely helpful. Bless you!😍
You are so welcome! Glad you like the video.
I have such a hard time trying to cut those jump stitches after the design has stitched. Thank you so much for sharing.
You are so welcome!
I appreciate this short video, lately the ones posted have been too long in the embroidery nich 😂. I just don’t have that attention span anymore. Ty! Bless you! 🤣
You’re welcome 😊
Thank you so much for this video. It was incredibly helpful!
You are so welcome!
Thanks, you really explained this in great detail that I could understand!
Glad it was helpful!
🤩🙏 tfs - this was fun & interesting to watch! Wondering if my little PE Brother embroidery machine has this capability if I buy the software 🤔
Time will tell & I’ll upgrade as needed.
Thx again.
Hi Quiltedbrownie. It will be the same. The embroidery software is run on your computer. You transfer the design using your flash drive to the machine.
Amazing! Helped a lot! Thank you.
Hi Ani You're welcome! Glad it was helpful! Enjoy embroidering!
WOW!!! You’re so good!!!!!
Thank you so much!!
Great Tutorial!
Thanks! Glad it was helpful!
Thanks 🙏 for sharing
Very helpful!
Thanks!
Hello from another Boricua by marriage !! This is great ! I'll have to try doing this myself. Thank you for the lesson. Where can I find that Mariah font you used?
Hi! I updated the link to the video description.
Hi. Nice tut. Thanks. My problem is needing to insert a Stop (for a color change). I think your method of locating a specific area in the stitching using the Simulator will allow me to do this. Thanks. Fingers crossed. Thanks, too, for giving me the link to this vid. Much appreciated. ❤️
Yes you are correct. You should be able to insert a stop and change the color. Thinking I should find a design and create a video doing just that. I'm sure other people would love to learn this as well.
@@BoricuaSewingCrafts Hmmmm. Great idea! Maybe I should send you my file to use in your demo. Lol.
Thank you!!!
You're welcome!
Thank you mucho!
You're welcome!
Can you do an updated video with closer camera? I’m visually impaired and this one has been difficult to see. These jump stitches are the pits!!
I have several other videos showing this same technique on the channel.
Where did you purchase that font from? I love it!!
Thank you so much! May I ask, what about the thread type? For example, I had someone digitize an image for me. When I loaded it into Embrillance, The thread type was Wilcom but that thread choice was not available in my “thread” drop down. So now I have Wilcom on some stitches and Madeira on others. Will that be a problem?
Hi Tonya. No it wouldn’t be. The only thing you have to watch out for is the thread wt. The brand doesn’t matter.
What version of Brilliance are you using
The current version I am using today is Version 1.172 dated 24 July 2021.
Jeanette? what file do I use? I click on pes but the jump stich does not show. but I click the xxx file I see the the jump stitch. and I have a 4 x 4 brother machine? and I don't see my Gold frame that you have on the Embrillance 😩
Hi Eve, to see the hoop in embrillance you need to make sure to have this view on. You need to select View/Draw Hoop. This will display the hoop on your screen. I use the PES file. If you see the jump stitches then just follow the steps I do on the video. Be sure to STOP the stitch so the machine will do a try at the end of it.
I have the demo trying to get the stick mark it does not have it. so I now I will buy the software will it have the symbol on it?
Hi Eve. Yes. If you need additional functionality you will need to invest in software.
Thank you will do see you next Friday 😍
Also...where do you get all your fonts ?
Hi Adienne, I like getting my fonts from Stitchtopia.
Can I do this with files I get from Etsy????
Yes you can. I do it all the time.
Can you do this with appliqué??
Yes you can
@@BoricuaSewingCrafts See in View that I can click Jumps. In this Essentials, on applique, when I click where you say to click, then click stop then change color to black, the black continues forward, it doesn't change the before color like you show in embroidery sample. Also the jump stitch doesn't show up in my Property when I add the black, (well it shows the black that continues in the design.) My Essentials is up to date. Sure I’m not doing something. Love this video. Watched so many times! LOL
What level brilliance are you using
Essentials
Great! Do you have a video on how to use 2 purchased designs to put together to make my own design? Your videos are so helpful. Thank you so much for doing them.
How about gaps between stitches Jeanette. It is so terrible when a design is beautifully stitched and there is a gap in it ruining the design. I know it is the digitizer's problem but is there a way or you can only do it in enthusiast. It's annoying.
Hi Visi, In embrilliance you can zoom into the design and see if there are gaps. If you see them you can increase the stitch comp to that area.