Swivel

Swivel
#Rig_Inspection_Workshop
Independent swivel checklist :
• Review the oil analysis records and frequency.
• Review the grease sampling and analysis records.
• Check for oil leaks from the lower seal.
• Record the thrust bearing clearance records and use a dial indicator (API RP 8B Section
6.2 and ISO 13534).
• Check that NDT is carried out on all load-bearing areas as per API RP 8B: Table 1 and ISO 13534.
• Ensure that the NDT inspection records of the drill pipe connection are as per API RP 7G Section 13.2.2 or higher standard.
• Review the wall-thickness inspection records for the gooseneck (see API RP 574 Table 1 for original pipe wall thickness).
• Ensure there is a connection for the wire line operations installed on the gooseneck.
• Ensure that at least one spare wash pipe assembly, fully dressed with the correct seals, is available.
• Has an upgraded type of wash pipe assembly been installed?
• Ensure that the spare swivel assemblies are stored in a vertical position.
• Ensure wash pipes have high-temperature seals fitted if the rig has to encounter high- temperature operations.

[@jankisaranmandal7107]

Good sir

[@AhmadMuhammad-mk8vo]

Amazing video❤

[@smileyt3549]

Even rotary drive

[@iteamgames1791]

Gran video

[@Anandkumar-ho4px]

is it required to refer any standard for repair process?