Uma vez quiserem me cobrar um farol novo por causa do suporte, parafusamos um pedaço de metal no plástico e no furo do carro sem alterar nada.😂 Gostei da dica, vou fazer isso.
Un amigo me dijo que los holandeses eran muy miserables en el tema de gastar dinero. Por lo tanto buscan todas las formas de evitarlo. Seguramente también han desarrollado estos hacks el sistema para no gastar 'dineros' (voz de usurero).
Когда у меня фара сломалась примерно так же, в пошел купил сетку ( она как фильтр от мусора мелкая очень (для армирования пластика )) купил пластиковые прутки из того же материала из чего и сделана фара (написано обычно на фаре какой материал ) взял строительный фен и починил... Держит куда лучше чем завод благодаря армированию пластика... Это всё я сделал через озон (российский интернет магазин похожий наверное на Еbay) (просто я вижу тут много иностранцев поэтому в скобках пишу что бы было понятнее с переводом)
@So4ny_BaleshEBay когда-то был в России. Зарубежный магазин, который позволял делать доставку в Россию, как AliExpress. А по сути своей он был, как Авито, вроде.
gracias bro,eres de los pocos que no lo critica,apesar de arreglarlo en 1 sort 😂,tu consejo es valioso,malla de alambre......plastico del mismo material
Главный вопрос как он такой же точно пластик достал. Если пластик не тот то хоть со скобой хоть без скорее всего отвалится. Если же пластик тот же то может и припаять нормально.
This really is a nice repair. Personally I don't think I would have ground down the extra until I was done forming everything. I'm just saying who cares if it looks perfect or not, I'm assuming this is on an older vehicle and honestly structural integrity matters so much more. I suppose grinding it flat and then putting another layer over it is a great idea but I just don't care if I grind it flat and make it look nice. As long as it's structurally sound that's what matters to me. Only my opinion of course. Your videos get a million more views in mine man, good for you dude!
Le faltó presionar uniformemente y constante el plástico para que las moléculas de los polímeros puedan unirse bien y no se quiebre como pasa al final del lado izquierdo donde se parte cuando hace presión con la tuerca...
There are these little metal things, applied with an electric hot end, that can be used for stabilising the old and new plastic components. You just clip off the tips and they sink into the material. Very useful, if used correctly.
Армировать надо. Тонкой проволокой выложить форму полукольца, с заходом на основной элемент, 4-6 колец, и после сверху пластик. Вместо пластика можно использовать суперклей и соду, или резиновую пыль.
yes, im a dab hand at plastic welding too, repaired quite a few things. Top tip: use cable ties, they are a good source. Repair a long crack with a soldering iron just dabbing along the crack too.
I haven't yet meet a mechanic with that patience and paying attention at details. Well done Sr. All I meet is mechanics that broke some kind of those plastic dismantling it
To create a better seal and blend of the two plastics, melting the bottom as well as the top might prevent cracking, though, I’ve never tried repairing a broken tab on a headlight before
A trick I have seen be used is to place a metal mesh and then melt the plastic into both sides so the mesh gives the plastic more integrity. Similar to rebar in cement same concept.
For that particular spot it’s an easy and genuinely best fix in terms of value. Costs just about half an hour of labour and almost zero overheads (there’s always some plastic around). You can argue about metal mesh etc, but honestly this thing broke likely because of unskilled person messing with it. There’s no way it will break again just by itself and plastic is well melted with the rest of factory part. 1000x better than replacing the light or bracket, cheap as fck as well 👌
It cracked at same place at the end 😂
Logiquement 😅
C'est juste pour vendre sa voiture avec 0 défaut 😂
Yea crappy fix
Yep, I think he should have put a metal mesh in it for strength.
@sasnad3says the person that would never thought of it smh... sit down noone gives a shit about your opinion
Eu também vi kkkkk
It got cracked immediately at the left joint when screw was tightened
LMAI, sure did 😂😂
How did you catch that
Lmao I checked that to soon as I saw his use a fuckin screw impact to tighten it lol.. Pollyanna why it's broke to begin with
How do you know? Are you a wizard?
Nope.
Uma vez quiserem me cobrar um farol novo por causa do suporte, parafusamos um pedaço de metal no plástico e no furo do carro sem alterar nada.😂
Gostei da dica, vou fazer isso.
Un amigo me dijo que los holandeses eran muy miserables en el tema de gastar dinero. Por lo tanto buscan todas las formas de evitarlo. Seguramente también han desarrollado estos hacks el sistema para no gastar 'dineros' (voz de usurero).
@CroniValpoChileMoro no Brasil, um farol Honda,(2021/2022), por exemplo: pode custar mais de USD 1500. Isso fora da loja da Honda, Mercado Libre.
а я просто просверлил новую дырку и зажал пластиковым хомутом, простояло 4 года, что сейчас уже незнаю, машина продана
Ih ih levei vantagi
That's holding for about 2 trips to the Walmart 😂😂😂
Wallmart is a thing where people have paperwalls in their homes
@MINEWISE😂😂😂
If you look closely, not even, it cracked as soon as he tightened!
проще было взять широкую шайбу с маленьким отверстием и прижать болтом.
Cuando aprieta el tornillo por segunda vez, se vuelve a rajar del mismo punto 😅
Es verdad 😂😂
@alvarorodriguez6764le faltó hacerle lo mismo pero por abajo no?
@victormanuelbarroncastro4542o reforsarlo con alambre
😂lo lijo demasiado
no se de q hablas, no veo nada de lo q dices q pasa.
Когда у меня фара сломалась примерно так же, в пошел купил сетку ( она как фильтр от мусора мелкая очень (для армирования пластика )) купил пластиковые прутки из того же материала из чего и сделана фара (написано обычно на фаре какой материал ) взял строительный фен и починил... Держит куда лучше чем завод благодаря армированию пластика... Это всё я сделал через озон (российский интернет магазин похожий наверное на Еbay) (просто я вижу тут много иностранцев поэтому в скобках пишу что бы было понятнее с переводом)
EBay такая фирма в России была бы мемом. А так озон и вб звучит норм))
Grazie.
La riparazione del video infatti non mi convinceva. 👍
@So4ny_BaleshEBay когда-то был в России. Зарубежный магазин, который позволял делать доставку в Россию, как AliExpress. А по сути своей он был, как Авито, вроде.
gracias bro,eres de los pocos que no lo critica,apesar de arreglarlo en 1 sort 😂,tu consejo es valioso,malla de alambre......plastico del mismo material
Rapaz Deus dá inteligência a todos parabéns 👏👏👏🙏
Me to
@peterGraumüller-x4fme tree
No final ele apertou e trincou de novo no mesmo lugar q estava quebrado kk😂😂
Siiiim kkkkkkkkkkkkk
No mesmo lugar, dava pra fazer bem melhor , mais o rápido sai barato que sai caro
Antes de apertar já estava trincado depois só piorou rsrs
Now I know what the $312 for the replacement headlight on my repair receipt was for.
Põe arroéla maior um pouco, vai prender a base e evitar quebrar com facilidade.
Главное армировать, иначе всё впустую
Parabéns pela criatividade e competência 🎉
Я бы туда еще скобы добавил для жесткости, как раз в местах стыка
Главный вопрос как он такой же точно пластик достал. Если пластик не тот то хоть со скобой хоть без скорее всего отвалится. Если же пластик тот же то может и припаять нормально.
The second he tightens up the bolt and it cracks exactely at the same spot the part was broken before, look close!😂😂🤦🤦🤦
Go to sleep 😂 it is a good repair, it doesn't need to be strong it is just to hold it
No it doesn’t 🤡
Are you delusional?
nah you can see that line before he drops the bolt in. not broke jst now sanded flat a ridge in the plastic
Serviço bem feito parabéns
Título del Track original:
Future Remix 98 - Jog.
Este que suena en el vídeo es una versión posterior que elimina la esencia del track.
Eu nem tiraria o excesso
Mas o cara caprichou👏🏾👏🏾👏🏾👏🏾👏🏾
Nice. Won't hold for long, but nice work.
I dunno. It's as good as the original one that broke.
@flutetubamorg in the the way it broke instantly in the same place when he tightened the fastener down
Excelente 👌 idea. Gracias.
Saludos, Sámuel.
This really is a nice repair.
Personally I don't think I would have ground down the extra until I was done forming everything. I'm just saying who cares if it looks perfect or not, I'm assuming this is on an older vehicle and honestly structural integrity matters so much more. I suppose grinding it flat and then putting another layer over it is a great idea but I just don't care if I grind it flat and make it look nice. As long as it's structurally sound that's what matters to me. Only my opinion of course. Your videos get a million more views in mine man, good for you dude!
It snapped in the same place at the end
yeah plus he should have at least imbedded some mesh across the whole part or some copper wire lengths
Nah looked like a shit job to me. Didn't even use any metal mesh
Muito bom, um artista.
Que talento pae
Gran trabajo 👌🏼👏🏼
Parabéns pela qualidade.
Excellent work primo 👏
Que arte 😂😂
Parece que mucho no entendieron que esto solo es una demostración y no un acabado definitivo.
Muito bom este video algo muito util
Skin lendária 🚀💪🏽♨️
@อู่เฮียอดุลย์ From Thailand ดังใหญ่แล้ว พี่ดุล แจ๋ว
5555
Le faltó presionar uniformemente y constante el plástico para que las moléculas de los polímeros puedan unirse bien y no se quiebre como pasa al final del lado izquierdo donde se parte cuando hace presión con la tuerca...
Era pra ele ter colocado um arame fazendo a curva, assim daria mais resistência
There are these little metal things, applied with an electric hot end, that can be used for stabilising the old and new plastic components. You just clip off the tips and they sink into the material. Very useful, if used correctly.
😮👍👏
What type of plastic did you use to restore it?
Podrías añadir unos alambres de cobre para aumentar la resistencia
A washer would have worked fine
Армировать надо. Тонкой проволокой выложить форму полукольца, с заходом на основной элемент, 4-6 колец, и после сверху пластик. Вместо пластика можно использовать суперклей и соду, или резиновую пыль.
What glue is this, and where can I buy it?
Listen ,,better than it was and in my eyes that's a god dam huge WIN 🎉🎉
Love it 😁🤘
Use iron net for better durability
It didn't crack what are these guys on about🙏
Eu preciso fazer isso no meu.
This is exactly me trying to save a trip to the sparepart shop with my “genuinity” 😂
yes, im a dab hand at plastic welding too, repaired quite a few things. Top tip: use cable ties, they are a good source. Repair a long crack with a soldering iron just dabbing along the crack too.
"A 1 second repair"
It takes longer than that, but it lasted that much 😂
Seriously this was pretty smart, I may have to use this.
Thank you. I'll be doing the same with the bumper soon.
I haven't yet meet a mechanic with that patience and paying attention at details.
Well done Sr.
All I meet is mechanics that broke some kind of those plastic dismantling it
Minimalistisch, günstig und perfekt
It cracked when you tightened the bold🤣🤣
Por lo menos no puede negar la garantía, le dejo las huellas en la reparación.
Use a washer under the screw to eliminate twisting plastic. Double trouble, loading up the blade with plastic and removed the guard. Use a file.
To create a better seal and blend of the two plastics, melting the bottom as well as the top might prevent cracking, though, I’ve never tried repairing a broken tab on a headlight before
Pregunta cómo hacer para elegir el plástico que hay que utilizar cómo te guías para saber qué plástico es?
Do you see the raised sides on the original part? They give it stability. Without them, it breaks again. As it is, it lasts from noon until midday.
Apretó de más el torillo y la reparación se partió 😂😂😂😂
Instead of grinding off excess, he should have just left the excess and put the bolt in! Better secure is always better than looks!
Pretty good. Not sure if I would repair in the same way but not bad.
Wow they just figured out plastic melts 👍
Broke it again with the impact.
Tirou onda
عملت كدة بنفسي في الغطاء الخارجي السفلي لغسالة الملابس الاوتوماتيك 👍 وهذا فضل من الله 💚🌿
Celui qui t'as inspiré de faire ta réparation ainsi est béni par Dieu.
Muito bom
Gambiarra de oficina fiz muito isso quando trabalhei com meu tio , ele me chamava de MacGyver ! 😅
What you sing this plastic name please
Bravo... However, the windshield is all chipped...
Halfway through I thought "this will last about 2 seconds" turns out I overestimated by one second
The little noise at the end 😂😂
I heard yeah in a retro robotic voice.
Nice repair
Damn. That was brilliant.
You can implement a metal wire for more stability
Trincou no final kkkkkk
it looks ok, minus the new crack. Should have just used and a larger washer.
Using a washer to pin the remaining plastic would have probably been a better choice
Great work and over tightened or need a Spacer
Only if it was that easy
A trick I have seen be used is to place a metal mesh and then melt the plastic into both sides so the mesh gives the plastic more integrity. Similar to rebar in cement same concept.
Руки бы оторвать такому мастеру
Wrap it with mesh it will hold longer also wont fall off even if it cracked.
Cracks at the first speed bump😂😂
Ottima idea 👍
Идея хорошая исполнение паршивое. Молодец.
For that particular spot it’s an easy and genuinely best fix in terms of value. Costs just about half an hour of labour and almost zero overheads (there’s always some plastic around). You can argue about metal mesh etc, but honestly this thing broke likely because of unskilled person messing with it. There’s no way it will break again just by itself and plastic is well melted with the rest of factory part. 1000x better than replacing the light or bracket, cheap as fck as well 👌
Looks good to me and it did not crack at the end.
Nice job ❤❤❤
Cracked in the exact same spot 😂
Good job!
Steel mesh like net would prevent it from further cracking😊
this is amazing skill :O
I find it easier to do with plastic washers (Already round then cut back and use plastic strips to weld
Tiao aprova 😅
Mechanic day by day 📈💀
Good that the original part was thick enough it could share a piece of it to itself :)
надо ещё сетку латунную впаять. хорошо держит при вибрациях.
Every FRS, BRZ and 86 doing this for sure 😂
U should have used a thin wire or copper filament to support extra
That is the strangest “headlight” I have ever seen!! 🤷🏼♂️🤷🏼♂️🤷🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️🤦🏼♂️
This is not the first time he’s made that 60 IQ repair.
En un par de ocasiones hemos reparado paragolpes de esta manera... derritiendo precintos de plastico...😊