1) 2:18 Tool made from stick with taped pencil to mark the line to cut out. 2) 14:19. Installing rubber accordion gasket. (2” minimum to 8” maximum.) Best to NOT start gasket in center.
When I get my box project started, I will probably do a 3’ diameter hole for my pass through. A circular pass through would be unique, easy to seal and would be the best for maintaining structural integrity.
wow I had no idea you could do this! I've been having the hardest time finding something in my budget with the cab and box joined. this just gave me a lot more options! thanks! : )
@@rvtek4695 Wow nice job so Accordian Pass Thru Gasket flex just right with the motion of the front cab and the box and prevents leaks and and other weather elements never realized that gasket is that good great work.
HI question... I'm planning to remove my truck's back window to connect it to my camper shell. I've been looking around for something but that rubber gasket your using looks perfect for the job, where can i buy this, and what are the specs, thank you :)
This was great! answered several thoughts I had about my own build I realise you have sold this now but may I ask, what about road noise and more importantly insulation? Did you just seal off the cab while in the habitation?
The camper section was well insulated and really wasn't any more noisy than a motorhome. When we was parked and staying in it there was a sliding door we shut.
Thanks for getting back so quickly! I have a luton sprinter with an overhead was planning to open up the entire cab (basically remove the bulkhead) to utilise as much space as possible. However i do worry about insulation.
@@terrygraves4736 Ok i see. Ive been looking for a cutaway walk-through and its tough to find so I may be looking at this job. I didnt know about the semis, i thought they have their own method. These seemed like they would twist off every time you go out of a driveway when the cab and body are moving around independently, not to mention rain. So ok.
Hi Kevin, I will have to put together a picture story, the Toter has moved to Missouri. We have been so busy with some other things, my channel has taken a back seat, we hope to change that soon!
trying yo build housecar from KW in N.C. , the ncdmv regs on house car is a joke. Even californias reg /dont care how u do it/ are way better than NC. Single axle only, cant stretch frame & must come from factory that way.
Wouldn't bother with the casket along the bottom of the doorway. I'd just put a C channel over that gap to walk over. The gasket is a flexible water seal and not structural, that I'd only apply around the top and sides.
If you'd ever been in a semi with a sleeper you'd know that the always go around the entire opening, it keeps the splash, air infiltration, ect out, very necessary
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
This is the exact video that was missing from my box truck built. THANK YOU!
Your welcome!
Best one man crew working on this project.
Thanks Gordon! LOL we try
I love DIY videos...mainly because I don’t think I’d have the guts to take on a project like this by myself! Great job!
Thanks!
1) 2:18 Tool made from stick with taped pencil to mark the line to cut out.
2) 14:19. Installing rubber accordion gasket. (2” minimum to 8” maximum.) Best to NOT start gasket in center.
When I get my box project started, I will probably do a 3’ diameter hole for my pass through. A circular pass through would be unique, easy to seal and would be the best for maintaining structural integrity.
Sort of like if a Hobbit had a box truck.
Excellent! Thank you very much!
Impressive. Was looking for a DIY to create a Truck Camper pass through. Thank you.
Your welcome!
This is awesome man great job. You explained this so well.
Thanks!
very good work were doing this on our build very soon
Just what I'm looking for! Where did you get the gasket? 10 feet is the longest I could find. Thanks!
Google Mediatunes, that's where I purchased it.
Hi thanks! I'm not sure now how long it was, at the time I ordered more than what I needed just to be sure
exactly what i was looking for. excellent!
Hello, Great job. Can I ask where you bought the gasket? Or what it might be called so I can look it up? Many thanks
Hello, I purchased it from "Mediatunes" it's called Accordion boot
4:40 was a close one. Good catch
Thanks!
Awesome!!! Thank You!!!
wow I had no idea you could do this! I've been having the hardest time finding something in my budget with the cab and box joined. this just gave me a lot more options! thanks! : )
Thanks!
@@rvtek4695 Wow nice job so Accordian Pass Thru Gasket flex just right with the motion of the front cab and the box and prevents leaks and and other weather elements never realized that gasket is that good great work.
Did you notice an increase in cabin noise while driving? THanks for sharing this, I want to do the same thing for my build.
When the door was open yes there was, but if you've ever been in a motorhome while traveling it was similar, door closed just the normal truck sounds
How did the gasket hold up the past two years? I would like to see the interior now if you get a chance. Thanks!
I've sold the truck so no new pics, last I talked to the new owners it was doing good.
Great video, there aren't a lot of videos that explain this. I have been wanting to do a pass through to my camper in a 1998 GMC k2500
Thanks! I saw the same thing when I went to do this.
Proper name is an ass gasket
Great Job!
HI question... I'm planning to remove my truck's back window to connect it to my camper shell. I've been looking around for something but that rubber gasket your using looks perfect for the job, where can i buy this, and what are the specs, thank you :)
google --->Accordion Boot
Yup, accordianboot.com
Thank you 😊
Very awesome video thank you sir.
I know this is older video but when you tip the cab forward how do you get the seal to work?
@@monoshock57the cab doesn't tilt on this model truck
Is the pass through gasket the only thing needed between the cab and box?
Yes
I was thinking the same thing if it works that's great I know the cab and the box movement is huge at times so if that gasket stays put that's great.
Hi what kind of truck was that ? A international
4700 international
excellent engineering. thanks for sharing!
Your welcome!
were did you get the accordion gasket?
Where did you buy the 3” seal rubber? Thank you
MEDIATUNES, Google according gasket
What it call the 3” gasket so I can look online? Thank you
This was great! answered several thoughts I had about my own build I realise you have sold this now but may I ask, what about road noise and more importantly insulation? Did you just seal off the cab while in the habitation?
The camper section was well insulated and really wasn't any more noisy than a motorhome. When we was parked and staying in it there was a sliding door we shut.
Thanks for getting back so quickly! I have a luton sprinter with an overhead was planning to open up the entire cab (basically remove the bulkhead) to utilise as much space as possible. However i do worry about insulation.
what's the name of the gasket and where did you buy?
Goggle accordion passthrough gasket, the company was Mediatunes
do you notice any wind noise or feel air getting in past the seal or is it pretty air tight
No it was completely air tight
Awesome 👍
And these will not leak rain?
If installed properly no, these are installed on thousands of semi trucks
@@terrygraves4736 Ok i see. Ive been looking for a cutaway walk-through and its tough to find so I may be looking at this job. I didnt know about the semis, i thought they have their own method. These seemed like they would twist off every time you go out of a driveway when the cab and body are moving around independently, not to mention rain. So ok.
What does it look like now .
@@bogoney no idea I sold the vehicle
Awesome hope there is an update coming soon
Hi Kevin, I will have to put together a picture story, the Toter has moved to Missouri. We have been so busy with some other things, my channel has taken a back seat, we hope to change that soon!
Hello sir good job , what is the length of the gasket you used for this build
It's nice where did you get the gasket
Hey how much for sleeper in m2 106
how much its gonna costs?
Where can I find the gasket for the bedroom and what is it called?
The company's name is Mediatunes, and it's an accordion gasket
9:13 Gasket
Nice job, though I would have cut curved corners rather than right angles to eliminate any leaks.
No leaks so far
Awesome! I’m gonna cut mine out and have it all welded but I may toss this on so it looks cool
How much do you charge to install a sleeper?
Hi sorry I don't do that right now,
Thanks!
Decent
trying yo build housecar from KW in N.C. , the ncdmv regs on house car is a joke. Even californias reg /dont care how u do it/ are way better than NC. Single axle only, cant stretch frame & must come from factory that way.
Sorry to hear it's so difficult there, here in ny they didn't want to know anything to register as an rv
THANKS! 😁
Your welcome!
Wouldn't bother with the casket along the bottom of the doorway. I'd just put a C channel over that gap to walk over. The gasket is a flexible water seal and not structural, that I'd only apply around the top and sides.
If you'd ever been in a semi with a sleeper you'd know that the always go around the entire opening, it keeps the splash, air infiltration, ect out, very necessary
Where did you get the gasket?
Hi, go to www.accordionboot.com
thanks for the link