How to Make Non-Touch Automatic Door Open-Close Body Temp. Detect System to Avoid Spreading Covid-19
HTML-код
- Опубликовано: 4 окт 2024
- The purpose of this project is to automatically open the door by detecting body temperature. In fact, this project is to prevent patients with new coronary pneumonia from entering their homes. To a certain extent, guarantee the safety of the living environment.
The following parts were used in this project:
Arduino UNO, amzn.to/3ihYFBl
2004 I2C LCD, amzn.to/3gTMZnW
GY-906-BCC IR Infrared Thermometry Module
Two Tower Pro MG90S Servos
Buzzer, amzn.to/2BeYzu3
HC-SR501 Human infrared sensor, amzn.to/3aJAOHX
Code: github.com/DKA...
Subscribe It's Free ❤ bit.ly/2C6HdAg
Thanks for watching, Stay home and Be safe...Have a great day!
#Arduino #Arduinoproject #Covid-19
Sir, can u please do a simulation video for the code sir. we just need it for our project just in case we meet problems upon making this one, we have reference on how to fix it. Thanks in advance.
Hey DKARDU! It is nice to see this project.
I have one ☝ question ,is it genuine code which u uploaded there.
yep, the code you will get the same result in video
But why u isn't show the uploaded code in ur video?
And also can please tell me the power supply voltage and current requirements. For the sensor.
Alternate sensor of ir temperature sensor. We can use alternate sensor .it is possible to working??
in your code, you write 'void kaiguan()', what does kaiguan mean?
Please Tell me Which Jumper connect in PIR SENSOR H OR L?
Hii...Sir.
Please Reply Me😭
I AM make This Project And project Work Perfectly But Servo Motor Are
continuously Rotate After 5 sec delay 🙄
please Help Me How Can I Stop This Problem ❤️❤️
really this project is not perfect working .
@@ArunSharma-cp5jw yes
your modules probable is different, purchase them in the links
@@dkardu4534 I am using sg 90s servo motor is..fine?
sir can you please share the coding pleasee
i need it for my project
what if you are 38 degrees does that mean the door will not open too?
How can we add gy bcc-906 module in proteus...i am anable to found on components search engine
Do u use buzzer on it
Which is the alternative sensor for IR TEMP SENSOR
датчик температуры откалибровать не мешает а так как всегда молодчина всё супер
where do you put the buzzer?
on breadboard
What are the applications of these project ?
good project sir, iam requesting you please upload the code in the descrepction for this project
Cost of the project
will this also sense a cat? will the Two tower pro MG90S open a cat door?
Sir LED is not glowing when the temperature is above the range and below the range please help
at what program this code will make and not giving errors?
Sir how to connect it..and you make a video for simulation please
what issues you have met?
Salam sir. Please can you upload the correct code for this project?
с нетерпением жду проёкты на
Excuse me, how will someone who is already inside get out? Could you add other sensors to the back?
The project takes the temperature of the people who come inside. You don't need to even care as you take the temperature when the go, not come.
Will you provide code of this project pleas....
sorry sir, can you explain why you must put the sensor pir for this project? plss reply me sir
you must tell it, human comes then open door...
sir, pls help me, the servo is move by sensor mlx why you put the sensor PIR, the sensor PIR is useless, pls sir can you explain this
both human comes and body temp under 38 degree, it will open the door
Good day, I have a question regarding code, where can I email you thank you
do anyone has the correct codes?
Hi may i know why are u using two sensor. Which is the PIR and infrared temperature sensor?
the white one
@@dkardu4534 Yes, I want to know why you use two sensor?
@@nuradlinazaini6063 one for temp,another one for IR
@@dkardu4534 thank youu for the explain
hi can u make a video tutorial about this but it's connected to IoT
there are lots RUclips video to teach you how to connect to loT. XD
Hi do your project working? And do you know how to connect to iot?
I keep getting temperature output as 1037 all the time .....can u plz tell me what went wrong?
you need change the numders to a degree
Which Website Used for Simulation ?
Arduino?
Maybe Tinkercad or Fritzing
It's is taking the reading at first
Then it is not resetting
There is alot of errors in your code plz give genuine code ???
I downloaded the code fully, and without changing anything when i am compiling the code,, It's not compiling 🙂
Hii, i have a same trouble and the code is not compiling do you know why?
please sir can u send me the methodology of this work?
haha, watch this video second by second
Do you have pdf reports for this project ?
More details you can get from our Github
@@dkardu4534 can the arduino send a notification to a mobile app that the door is open, or close?
Could you help me with the project report??🙏🙏
haha
Bro if i keep any object its showing 31 degree or if i also keep my hand its showing 31 but the nrml body temp is 37 degree Is their any problem in the code
it is not a problem, your hands only 31 degree outside. Human body temp. in 37 degree is forehead, armpit and mouth cavity
sir can u share it's block diagram for for connections
in the github link in my description
Plz sir can u send me exact code
Can you provide the block diagram?
watch our video second by second
Dude can I get there code you used for arduino
sure, in the github link
lcd doesnot display any things
library issues
Can you send me abstract for this project
check my github
COMPILE ERROR 'class LiquidCrystal_I2C' has no member named 'init'
replace init to begin
@@azizihamizad2603 how about LiquidCrsytal_12C.h: No such file or directory
@@azizihamizad2603 you use arduino idle right?
@@muhammadamjad8861 you already install the correct and suitable library?
Can you please provide code
check github link as below
can i upload your projects to my website?
what's your website?
DKARDU it is platform to upload projects , and may i get more viewers for you
@@dkardu4534 Bro Please Help😭
The code is not working
what's the problem?
@@dkardu4534 we can do this code in arduino ide?
Or only in git hub?
If there is anyone from Bangladesh here, please reply me..