Polycraft 480 Brumby CC + Yamaha F75hp boat review | Brisbane Yamaha

Поделиться
HTML-код
  • Опубликовано: 22 окт 2024

Комментарии • 54

  • @egorone0408
    @egorone0408 2 года назад +1

    Great footage.
    Good boat.

  • @CalaisRider
    @CalaisRider 3 года назад +1

    That was a good presentation. I got to see this supposed amazing AT REST stability. Speed and going straight is not what 90% of your boat time is occurring at so why do we focus so much on going forward and speed. I still haven't seen enough of this STABILITY and also show some negatives (which all boats have) as yet. When someone starts to show me what a boat is like to actually and truly fish out of, I might decide on my next one.

    • @BrisbaneYamaha
      @BrisbaneYamaha  3 года назад +4

      Fair comment but I’m a dealer not a free review service
      I never lie if I don’t like a boat I just don’t do a RUclips

  • @ScoutyBoyO
    @ScoutyBoyO 4 года назад +2

    Do they have a catamaran? I bought a poly trimaran sailboat called a windrider and yes, it is bullet proof. I am the 3rd owner and it has held up great. I asked myself that question, " are there any power boats made of the same?". Looks like it, but i want an offshort cat.

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад

      Not as jet but I’ll pass on your thoughts as I believe this current situation will result in a Resurgence in watersports another outdoor recreations within Australia

    • @ScoutyBoyO
      @ScoutyBoyO 4 года назад +1

      @@BrisbaneYamaha I am in the states. Bring it here. :-)

  • @bradhaines5711
    @bradhaines5711 5 лет назад +5

    Excellent Drone flying Dan. Well done.

  • @justwingit1633
    @justwingit1633 3 года назад +1

    What’s pollycraft like compared to smartwave ???

  • @davidleekalbjr.3035
    @davidleekalbjr.3035 5 лет назад +1

    I'm curious. What is the shallowest water it can float? My waters, are 4 inches deep. I pole these waters. Just floating.

  • @lennisaunders1772
    @lennisaunders1772 4 года назад

    I have a poly craft 3m tuff tender as my first boat I got it when I was seven years old I live on The water I leave it out in the sun every day I’m left that boat in the sun for five years it’s still perfect there was big rains my three meter rat Pack from Makocraft my rat Pack will sink and then we have to get all straps to pull it up and it’s a nightmare but with my poly craft it floats because it has so much phome inside.

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад +1

      I’m going to let your story in a RUclips did a Polycraft range yesterday

  • @anthonykontos7931
    @anthonykontos7931 2 года назад +1

    What’s the top speed for this?

  • @Drunken_Hamster
    @Drunken_Hamster 4 года назад +2

    Reinforce the transom and throw a 125 on it. Or whatever the biggest tiller compatible motor is. Then have an entirely open deck (no center console) and go exploring/hunting/boat camping or something.

  • @Lt.Fireguy
    @Lt.Fireguy 5 лет назад +4

    Bring it to the American market please! I'll buy a polycraft today! I'm in Florida

    • @Polycraftusa
      @Polycraftusa 4 года назад

      Polycraft boats now available for sale in the US. Check out polycraft.com

  • @kosonenkosonen9278
    @kosonenkosonen9278 3 года назад

    is the motor flexing side to side or the boat? what are they like in descent chop?

    • @BrisbaneYamaha
      @BrisbaneYamaha  3 года назад +1

      Polycraft do flex but I don’t think you can see with eye you feel it not in a bad way and it doesn’t feel unsafe
      If your buying just for open oceans I wouldn’t
      If you want a stable all round indestructible boat capable of going wide and very safe if caught out in a storm
      Buy a Polycraft

  • @dam4274
    @dam4274 3 года назад

    Fly to Brisbane, see the Zoo, Bindy and the gang then go buy a boat and have it shipped home.

  • @peter2679
    @peter2679 4 года назад

    I owned the 450 when they were cheap to buy. They are a great boat and I should of never have sold it because they are an expensive boat now.

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад +2

      Buy used
      Everything goes up
      Even wages Interest is all time low so why not live and borrow the money

  • @Lt.Fireguy
    @Lt.Fireguy 4 года назад +1

    Wish I could buy it in FLORIDA,USA!

    • @Polycraftusa
      @Polycraftusa 4 года назад +2

      Polycraft boats now available for sale in the US. Check out polycraft.com

    • @ernestochaparro8751
      @ernestochaparro8751 4 года назад

      @@Polycraftusa in Puerto Rico ??

  • @mavsonline
    @mavsonline 4 года назад

    Can you please do a review on the 5.3 warrior please

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад +2

      I’ve got a 530 centre console coming next week

    • @mavsonline
      @mavsonline 4 года назад

      Can't wait to see it

  • @hallshead2819
    @hallshead2819 5 лет назад +4

    i have this exact setup. its a polyethylene boat not a polyurethane boat.

    • @snapon1948
      @snapon1948 5 лет назад

      What’s the difference.??

    • @damodoesall6240
      @damodoesall6240 5 лет назад +1

      The motor looks like it vibrates a lot on the transom due to plastic flexing, do you find that?

    • @hallshead2819
      @hallshead2819 3 года назад

      Sorry for v late reply..dont get notifications. I don't find theres any vibration. I have a Bimini too and when the bimini is down resting on the back the engine is super quiet..great boat and very easy to maintain..if u have a bad back like me its a LOT softer-this is why I bought it.

  • @thecaptain2473
    @thecaptain2473 4 года назад

    How about 60hp outboard?

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад

      Go high thrust or it’s slow out of hole

  • @jamesthreats5800
    @jamesthreats5800 4 года назад +1

    Gimmie that boat please!

    • @glenfennell
      @glenfennell 4 года назад

      i likem that much , iwent and bought one (4.8 frontrunner) with a yamaha 90

  • @thajuai8282
    @thajuai8282 4 года назад

    How much the poly carf Indian rupees

    • @BrisbaneYamaha
      @BrisbaneYamaha  4 года назад

      Goodness me
      There 53.5 rupees to the A$
      Over 2000000 rupees
      Heaps cheaper in euros

  • @davescheer5038
    @davescheer5038 4 года назад

    Root molding a large plastic boat

  • @juliojulio5042
    @juliojulio5042 4 года назад +1

    Lastima el idioma no es en español porque la embarcacion esta divina

  • @theowenssailingdiary5239
    @theowenssailingdiary5239 3 года назад

    Pity about the gal trailer really

    • @BrisbaneYamaha
      @BrisbaneYamaha  3 года назад

      What’s wrong with gal trailers?
      Lack of maintenance is what kills them
      90% of alloy trailers have steel components that normally rust just like gal

  • @gerardhaubert8210
    @gerardhaubert8210 4 года назад +1

    I live in Charleston SC. I will gladly test one of your boats At No Cost for my services!!....how can you pass up a deal like that? Contact me.

    • @Polycraftusa
      @Polycraftusa 4 года назад

      Polycraft boats now available for sale in the US. Check out polycraft.com

  • @vag226
    @vag226 4 года назад

    polyethylene boats not polyurethane......

  • @paddlingfool64
    @paddlingfool64 4 года назад +2

    480 kilos, hopeless

    • @bigvee401
      @bigvee401 4 года назад +3

      4.80 metre not kilo, douche bag

    • @paddlingfool64
      @paddlingfool64 4 года назад

      @@bigvee401 if you had bothered to read the specs idiot, you would see the weight. It is actually 560 kilos...douchbag

    • @bigvee401
      @bigvee401 4 года назад +2

      @@paddlingfool64 Hey dipshit If you had bothered to read your first comment idiot you would see you have written 480 kilos lol ya moron

    • @bigvee401
      @bigvee401 4 года назад

      @@paddlingfool64
      check again you fool the centre console is 540 kg its the front runner that's 560 kg can't believe you stuffed that one up LOL!

    • @joeltramacchi6365
      @joeltramacchi6365 4 года назад +2

      No heavier than a plate boat in that size..... wanna get slapped around, go get your wafer thin pressed boat mate.