How to use eDrawings - How to measure in eDrawings by J - CAD Inc.
HTML-код
- Опубликовано: 9 сен 2024
- This video shows the basics of how to use edrawings and how to use the measure tool, how to use the section tool in eDrawings and other eDrawings features.
Call J - CAD Inc. with any questions 1.888.202.2052 or email info@jcadusa.com.
CLICK HERE to see how to install eDrawings step by step: • How to install eDrawin... .
3D Printing Services - Do you need a professional company skilled in 3D printing applications to online model and rapid prototype your next big idea? If yes, you've come to the right place! Call us now on 1-888-202-2052, email jason@jcadusa.com or visit our website jcadusa.com/ to see more of our work and request a quote, you won't regret it!
JCAD Inc have been involved with 3D printing almost since its inception and long before it became widely known. Let us put our years of experience towards your project, the results will show the difference!
We're a professional 3d printing, online modeling and rapid prototyping company with the skills and partnerships needed to take your whole project inhouse from design to mass manufacturing.
See more of our work + explanations of the process needed to take your ideas to inception in our other videos or on:
Facebook: / jcaddesigninc
We are also regularly featured on 3dprint.com, eg:
3dprint.com/124...
3dprint.com/126...
3dprint.com/956...
3dprint.com/790...
Like this video? These are common searches to find this video…
3d printing company
top 3d printing companies
3d printing companies to invest in
3d printing business
custom 3d printing
3d printing website
online 3d modeling
3d print service
3d printer service
3d printing online
best 3d printing service
rapid manufacturing
rapid prototyping services
rapid prototyping companies
Don't forget to call us on 1-888-202-2052 or visit our site jcadusa.com/ for a free quote on your next 3D printing, rapid prototyping or online modeling service!
#3dprinting
Awesome tutorial. Short, sweet and to the point.
How do i enable measure?
Hi, when you save the file from Solidworks, make sure you click on options and then find the setting for saving as an eDrawing file and make sure the checkbox for "allow measure tool" is checked.
it needs to be enabled when saving the eDrawings file from Solidworks
Can you tell me how can I measure the number of square meters to paint, for example. I Know that the edrawings can do that, but I don't Know how.
I think you just click the surface with the measure tool and it will tell you the surface area in the bottom left corner.
How do you do freeform dimensions? I am trying to get a distance from a circular end face to a curved backside on a multielement, and the program edrawngs is very flakey allowing me to get surfaces it accepts. Then, can I put three dimesions on the screen at once (length.width, depth)? Is there anyway to do outline dimensions of all the outer envelope? Thanks!
Hi Chuck, have you tried clicking on points of the circle or arc? eDrawings let's you click on end points, quarter points and center points. See if that helps.
Hello J... I am trying to become more familiar with edrawings and have a model that was provided to me from one of my fabricators... when I measure parts, the scale is way off.. what should be approx. 12" dY result = .455in. The drawing was made in solidworks (mm), but for some reason I cannot figure out how to extract actual measurements. can you give me a hand understanding what the problem is... I assume the file is ' OK to Measure' since I can pull up the tool. Not sure if that has something to do with it... also I am using the free version... also not sure this is a problem. Let me know... thanks!!!
I replied by email, Frank.
Do you know if you can use key like "M" to measure instead?
I'm not sure, I just click on the measure tool.
@@JCADInc I understand. I use the measure tool a lot and thought it would be easier to press one button
@@XplanZ perhaps it is possible. Google it or check settings in eDrawings. I agree, it might be a bit easier to have a 'hot key' for different tools in eDrawings.
Thanks for the tutorial. How can I measure distance of any two points?
This is shown in the video
@@Plusplusultra Thanks, but it's not shown in the video. The video mainly shows how to measure distances existing shapes, like circle/square/rectangle. What I need is to measure the distance between any two points (see two points inside one circle).
@@YongtaoHU highlight the point and highlight the other point.
@@Plusplusultra Thanks for your quick reply. What if there is only one flat circle, no [shown] points inside the circle. In this case, I cannot highlight anywhere inside the circle, but the circle itself. Hope this explains what the real issue I'm facing with. Thanks.
@@YongtaoHU I see! Yes sometimes there are features with no points and it's not possible to measure. What you can do is measure the radius or diameter of the circle and then measure a straight section and add them up. Does that help?
Why is my Mass properties button greyed out on .step files?
Hi John, I'm not sure. Might have something to do with the settings when you save the files as a STEP file.
@@Plusplusultra Could be. These files being generated and sent to me from outside parties. I didn't know if it was something on my end or theirs when they generate the file.
@@nuggetboy19 I’d ask them to have a look at the settings
An arrow cursor doesn't rotate the view.
correct, select the rotate tool on top of the screen to rotate
@@Plusplusultra or press and hold the wheel button, that’s what I found. If you choose the rotate tool, press it again after rotation is done to come back to measurement. This is another tip.
@@ivanmikhaylov1103 yes that works too
Measure is grey out
How I enable it ?
Hi Freddy, when you save the file from Solidworks, make sure you click on options and then find the setting for saving as an eDrawing file and make sure the checkbox for "allow measure tool" is checked.
Thanks
통역좀 ㅠㅠ
lol this doesn't work at all. measuring a dxf file that is confirmed correctly drawn and to a 1:1 scale this crappy e-drawings pro thinks the part is some arbitrary massive measurement. just garbage translation.
I asked how to measure, not a complete lecture. You can explain this in 20 seconds, do that in the future.
Yes sir, right away sir! Anything else I can do for you, sir?
@@JCADInc That'd be all, much appreciated