07-12 Nissan Altima Power Steering Pump Replacement
HTML-код
- Опубликовано: 13 сен 2024
- How to replace the power steering pump in a Nissan Altima 2007-2012.
Power Steering Pump
amzn.to/33WnDUL
Pressure Hose
amzn.to/3HdRAOC
Hose from reservoir to hardline
amzn.to/3z8QAIC
Hose from reservoir to pump
amzn.to/349zLly
Pry Tool: amzn.to/3tcKru7
Wobble Extensions: amzn.to/3HMxhYT
My Favorite Impact Ratchet: amzn.to/333ECoa
the V6 version's pump is almost impossible to get out due to the brackets.
Without a lift, this looks like it could be pretty challenging since access is tight.
It is easier with a lift.
I just changed the pressure hose and it's a pain to put back in, and now the fluid still leaking. I quess the pump is the problem.
I had the pressure switch leaking, thought it was the pump. Changed switch, now I have a spare pump .
Got lucky 🍀
On the pressure line where the big bolt is how was the copper orings was it 1 at the top of was it 2 on the end
Cant recall, but usually only 1 per sealing surface, maximum 1 on each side of the high pressure line end fitting.
about how long did this take you? 3 hrs maybe?thanks
Yes, good estimate :)
It only took me an hour to do pretty simple but not hard either.
The line into the pump is installed incorrectly. If you notice any where the banjo bolt goes into the pump the line has a nub that locks the line in place where it slides in facing the passenger side. You have it facing up putting extra tension on the line. It won’t last long
Not sure what you're seeing, but you can see it is installed the same way as before the new pump. Also been running great for the last 2 years.
@@TrentsOvertimeGarage the end of the pressure line that is connected to the pump itself with the banjo bolt. There is a nub that fits into a slot on the pump.
hey what's the name of the hose in the back
any body lmow
Kind of guessing what you mean here, but it would be the return hose from rack to reservoir. Try REIN PSH0529
Pressure Line
Did you have to remove the engine motor mount on top?? Or can it be done without taking them off?? Thanks in advance for your help!
No need
Does the rubber o.ring go on the high pressure with the copper washer?
These normally only have a copper washer
Did the noice go away?
did you spin the new pump to see whether it had the same resistance? I have seen this before in hydraulic motors and pumps where you cannot turn them by hand.
Yes, good idea 👍
What’s the trick to getting that bolt in the back of the power steering pump
One trick I’ve found is to use longer extensions, and reach from farther away because it puts some flex in the angle of your socket.
Just changed the line and I’m saying a prayer for those in the future worst repair I’ve ever done anyways
Power steering was working but leaking from the high pressure line at the fitting I changed the line. And everything was perfectly working for 5 minutes then complete lost of power but no leaks… do I need to reset something? I’m at a loss never had that happen before.
Not sure what could be wrong without seeing or more detail. No reset required. Pressure switch?
funny enough two weeks after repair it works again idk i bled the system multiple times i guess there was a suborn bubble or something@@TrentsOvertimeGarage
Whats thevuse of this video you didnt show us how did you remove it 😂😂😂 just extra speed moving guy 😂😂😂
Do you need a pulley puller
Yes if you buy the pump without the pulley. I believe you can get it with or without.
Is this car v4 or v6?
4 cylinder
What's going on with the fast forward during the removal? Absolutely useless video
🙏🙏🙏🙏🙏!!!
Thanks!
-100
HE has 2 washers on one side of banjo instead of 1 on each side
Good eye, that would be wrong. You need one on each side of the high pressure hose fitting. I believe that is just an optical illusion, but I can check that on my friends car, thanks for pointing it out!
How much would this cost
Depends if you do the hoses with it, but just the pump would be about 2 hrs labor. Your shop will be about $60-$120/hr, dealers always on the higher end.
@@TrentsOvertimeGarage labor is 4 hours book time
Useless! Wrong procedure anyways