Dude, I wish I was you. I always want to make a cardboard gun, but when screw up something up a little, I give up (I don't even make high quality guns). You put sooo much effort!
Never give up after making a mistake. I make mistakes A LOT, but they can always be fixed. If you get annoyed at a particular mistake, put down the project, take a break and come back to it tomorrow. That's what I do.
Say for instance You had a single regular piece of cardboard, something from a cardboard box. What would you use you strengthen that single piece? I am trying to make my son a transformer car but some pieces keep bending. I need to stiffen and strengthen just a few pieces. One is 4ft 8in. Please help
I know that graphite can be used as lubrication. That being said, is that the reason my knife is slipping off the the cardboard? The blade and knife is new btw.
Hey magicalamazing please I wanted to ask you if you could do a cardboard magnum or a sniper rifle if you do you thank you very much the best I'll follow you when you had 50 and some subscribers I know you're going to achieve a lot
My suggestion would be to scale it using your hand as a reference compared to the handle. Use your best best guess; they aren't real, so you won't be wrong as long as its close.
I always make sure to have a sharp blade. If it starts to get dull the cut will tend to be pushed around by the corrugation making it difficult to cut straight. The blades for the utility knife I use cost like $10 for 100 so they are crazy cheap to replace if they start to dull.
I have a question, how do you glue your cardboard? I use hot glue which is messy but it works for me :/ your builds are clean and satisfying to the modern cardboard engineer. I just plan to make a gun SO PERFECT that I might spray paint it black as a prop :D
TAAAAAAAPE? WHAT IS THIS MATERIAL. THE ONCE FORBIDDEN ADHESIVE I CAST AWAY IS BEING USED BY A MASTER OF CARDBOARD?!!?!?! I SHALL TRY THIS METHOD AT ONCE
How do I make a curved L shape. Idk if that makes sense? Like if I'm doing a ramp how would I make that bend as smooth as possible. I was thinking if talking of the correlation from the middle of it. Does that sound like a good idea
Yeah, I'm not really sure what you mean. If you just want a smooth curve I would say just remove one side of the cardboard from the corrugation and Use the side with the corrugation as the curve (flat side showing) for strength. I hope that made sense.
It's not really the scissors. No offense but you're bad with scissors. When I use scissors I usually get clean cuts. I don't use the knife as much because it's a hassle to use when cutting out smaller pieces
I'm trying to make a point by recreating the common issues I see with others' projects like the bent cardboard. I could cut better, I could get better scissors however the idea of the video is to explain why I don't tend to use them for major cuts. When it comes to making tiny pieces I will often use scissors, but simply put, long straight or complex curvy cuts are easier with a sharp knife.
I do not sharpen my knife. The blades are disposable. When one gets dull I flip it around and use the other end and when that gets dull I replace the blade with a new sharp one.
It’s just a cutting mat. The one I have is made by Olaf, but I only use it to protect the table I am working on. I don’t really use the lines all that much.
Hey IMPORTANT For me can u please make a totorial for an super easy gun that any one can build ples i would have one of these i dont would to be bad to you but pleasy make an totorail
Banana HD yea my mom threw away my machete my kukri and katana. she isn't a fan o me having a weapon, but I managed to hide my tomahawk. if u are wondering how old am I I'm 16
The one I currently use is similar to this, but I got it at a local hardware store. www.idealtruevalue.com/store/p/157658-Master-Mechanic-Folding-Lock-Back-Utility-Knife-With-Hardwood-Handle-Q.html?feed=Froogle&gclid=Cj0KCQiA5t7UBRDaARIsAOreQtgddUvHhLgGqbEFC-J3Mlg-Bq84PeC_8JIL2W2VEBtyVzJu3RguWDQaAhmtEALw_wcB
When you see you have the same scissors like the one who's using it.
Dude, I wish I was you. I always want to make a cardboard gun, but when screw up something up a little, I give up (I don't even make high quality guns). You put sooo much effort!
Never give up after making a mistake. I make mistakes A LOT, but they can always be fixed. If you get annoyed at a particular mistake, put down the project, take a break and come back to it tomorrow. That's what I do.
Those 3 dislikes are mad scissors
foreal
Hahaha thats so smart from u mate
they r 14 lol
Hmmmmm
There is 54
YES I needed this I making a cardboard Fallout Laser Rifle and the stock is a pain in the ass so thanks for making this
But when I cut my cardboard, it still comes out "choppy" and sometimes gets bends :(
I’d suggest getting a sharper blade or a new box cutter blade.
Love your vids and creations man, keep it up!
Tysm! This will certainly help me on my cardboard spas-12 and battle axe
You are very welcome! I'm glad to see these videos are of help. :)
Magicalamazing hey magical I'm live if u want to come watch
I just finished my knife! Too bad I'm redoing it.
I have this struggle,im so afraid to use my exacto so I revert back to my scissors and it looks just how you've shown all bendy and such.
Wow...this explains alot from your projects,and I bought a knife
This vid helped me alot.
Mrfox 87 Yep ik, what do you think about it. I think it will be good.
Mrfox 87 lol
How do you cut circles using a knife?
scssors better for thin paper
or for hair
I use a small kitchen knife!
Is that ok?
Try using a kunai it works nice
you: make some diy
your parents: :O i will take this from you so you cant hurt yourself
Well this will help
What box cutter do you use I really need to buy one...
You should make an m1 garand
Fun Fact - *This guy do not respect scissors* 😂
He does not, he just uses his knife because it's easier and better
hey fake checkmarks!
30k Play Button
Could you please provide the link to buy this product? Thanks
"Noice"
-Micheal Rosen
Can you make tips and tricks video
about how do you make cardborad pistol slide pls
Say for instance You had a single regular piece of cardboard, something from a cardboard box. What would you use you strengthen that single piece? I am trying to make my son a transformer car but some pieces keep bending. I need to stiffen and strengthen just a few pieces. One is 4ft 8in. Please help
Try and make a Hk416 / M416 from PUBG (Playerunkown's Battlegrounds)
I think it also matters with the quality of the knife
Does this work on paper and plastic
asking for a friend
Yes please send
Which cutter you are using
I know that graphite can be used as lubrication. That being said, is that the reason my knife is slipping off the the cardboard? The blade and knife is new btw.
Hey magicalamazing please I wanted to ask you if you could do a cardboard magnum or a sniper rifle if you do you thank you very much the best I'll follow you when you had 50 and some subscribers I know you're going to achieve a lot
hey magical how do i scale and create a gun that doesn't exist? e.g. fallout 4 10mm pistol or VMP from BO3
My suggestion would be to scale it using your hand as a reference compared to the handle. Use your best best guess; they aren't real, so you won't be wrong as long as its close.
You should make a gun that actually shoots with a spring mechanism and working mag
Wait can blade work?
My cutter always goes to another direction while im trying to go straight
I always make sure to have a sharp blade. If it starts to get dull the cut will tend to be pushed around by the corrugation making it difficult to cut straight. The blades for the utility knife I use cost like $10 for 100 so they are crazy cheap to replace if they start to dull.
Magicalamazing i got a new blade
I finished my stahlhelm but i didnt paper mache and paint it yet
Can I use a stylus instead of a pocketknife?
I have a question, how do you glue your cardboard? I use hot glue which is messy but it works for me :/ your builds are clean and satisfying to the modern cardboard engineer. I just plan to make a gun SO PERFECT that I might spray paint it black as a prop :D
I use hot glue as well. Aside from a few exceptions, I only use cardboard, paper, hot glue, and tape.
TAAAAAAAPE? WHAT IS THIS MATERIAL. THE ONCE FORBIDDEN ADHESIVE I CAST AWAY IS BEING USED BY A MASTER OF CARDBOARD?!!?!?! I SHALL TRY THIS METHOD AT ONCE
Haha I really only use it for holding paper rolls together like the barrels and whatnot.
thank you
How do I make a curved L shape. Idk if that makes sense? Like if I'm doing a ramp how would I make that bend as smooth as possible. I was thinking if talking of the correlation from the middle of it. Does that sound like a good idea
Yeah, I'm not really sure what you mean. If you just want a smooth curve I would say just remove one side of the cardboard from the corrugation and Use the side with the corrugation as the curve (flat side showing) for strength. I hope that made sense.
Nice
You can make stg 44 ??
Thank God you didn't comments that on a PEWDIE PIE video
Make a stg44
César Sebastián Citalán Cruz ?????
you should make a scar l
It's not really the scissors. No offense but you're bad with scissors. When I use scissors I usually get clean cuts. I don't use the knife as much because it's a hassle to use when cutting out smaller pieces
I'm trying to make a point by recreating the common issues I see with others' projects like the bent cardboard. I could cut better, I could get better scissors however the idea of the video is to explain why I don't tend to use them for major cuts. When it comes to making tiny pieces I will often use scissors, but simply put, long straight or complex curvy cuts are easier with a sharp knife.
Magicalamazing ok
cool
hey you are making perfect guns keep that work, i have question
can you make a serbian pistol CZ99
its the most popular pistol in balkan
Can you tell me how you sharp your knife ?
I do not sharpen my knife. The blades are disposable. When one gets dull I flip it around and use the other end and when that gets dull I replace the blade with a new sharp one.
@@Magicalamazing Thanks for help
Can you make a shotgun?
what do you call with that base with grid lines???
It’s just a cutting mat. The one I have is made by Olaf, but I only use it to protect the table I am working on. I don’t really use the lines all that much.
i used scissors for cutting cardboard.I wish i had cardboard cutter but im just an kid.I cant afford it or where to buy it
I dont have a box cutter
Hey I am making a cardboard house so the door is not cutting cleanly
Can u use any knife?
Man it's sucks to be left handed when using right handed tools
how about the paper.. im doing rght now wth very thin cartolina wth my cutter but its choppy all the line..
Hey IMPORTANT For me can u please make a totorial for an super easy gun that any one can build ples i would have one of these i dont would to be bad to you but pleasy make an totorail
I used to have knife my mom threw it away
CT4775 THE 1 and only my mom broke 2 of mine and lost my x acto
Banana HD yea my mom threw away my machete my kukri and katana. she isn't a fan o me having a weapon, but I managed to hide my tomahawk. if u are wondering how old am I I'm 16
CT4775 THE 1 and only wanna see my katana collection
My mom also
@@motivewoodwork8207 this was 3 years ago holy fuck, and I still managed to lose that fuckin tomahawk
What will I use to cut paper?
I just use my box cutter for that usually as well, though you can definitely use scissors for paper if you want to.
do one Barrett.50 plis
please make FN p90 or could you do a video on how to make Sight like holographic,acog,RDS
Thx :D
👍👍👏
100Th like ! :)
What's the knife u use
The one I currently use is similar to this, but I got it at a local hardware store.
www.idealtruevalue.com/store/p/157658-Master-Mechanic-Folding-Lock-Back-Utility-Knife-With-Hardwood-Handle-Q.html?feed=Froogle&gclid=Cj0KCQiA5t7UBRDaARIsAOreQtgddUvHhLgGqbEFC-J3Mlg-Bq84PeC_8JIL2W2VEBtyVzJu3RguWDQaAhmtEALw_wcB
Now aug pls xd
make MP7 plsssss !!!
Please make a skorpion gun !!!! :)
What about exacts knives
Do you mean exacto knives? They are ok, but the blades are more flimsy and I found I needed to replace them more often,
Do u have discrort
yep. I'm not really on much though discord.gg/uRHqgY
lit
Hey I requested this :D
k
ak 47 plis
Scissors sucks at doing that
Make a groza
Hi daddy
Perfect thix
KKK
Thank you
k
ak 47 plis