I watched 3 other videos until I came across this one. Angel showed me exactly what I needed to do and what tools to replace the regulator in my 2003 Suburban. It really was easy! Thanks a "shitload" !
THANKS SO MUCH FOR SHARING THIS VIDEO! On my 2001 Suburban, I was able to replace the rear assemblies without having to remove the speaker in the door. OH, and do be careful with the power window switch/trim. I had one come apart and lost one of the tiny white toggle pins inside the window switch assembly (on a white gravel driveway). Off to Amazon garage to order a replacement.
Good video. 👍🏼 Thanks. That sealant is some sticky stuff. Use a utility knife to cut the sealant as you pull it away from the door about 1 inch. That way the sealant will stick to the same spot it came from. Helpful Tip: The window motor will drain your car battery if you raise and lower the window too many times while testing it. Test your installed window motor with the car on. That way you don’t drain your car battery. It happened to a friend of mine. 😊
Thank you for actuall showing what breaks on these. I watched a few videos and couldn't figure out WHY they would need to be replace. Both my rear windows on my avalanche will need this done. Ah shit....LOL
Mine just ... fell .... right into the door. At the time, and since nobody really sits back there anyway, I just popped the door panel, unhooked the switch, and tied the window clamps to the door in the "up" position, but I will have to fix it at some point. I may cuss a little less (at least, that I'll admit here :) ), but I appreciate the video on doing this.
Great guide on what to do and followed word for word as I cussed a few times trying to unplug the switch(fell apart but easy to put back together), u do the handle(broke skin on my index finger) and my God the damned sealer gets everywhere! Other than that it was cakewalk. Now to do the driver side tomorrow morning. Fml.
It sure seems you fix almost all the things. Just curiosity?? Is there things on any car that you can't fix it or rather not work on it? And what car maker do you think overall best designed in your view point?
Yaaaa budddy, I did mines 1 handed for real lol, i forgot that when I unhooked the bracket, the window came down. While I had tape on standby, knowing my luck, it wouldn’t hold and prolly come crashing down, then another expense lol.... just stuffed a couple tools under it and held it with one hand while the other I installed the part. Mine was a little easier. An 05 tahoe takes 1 bracket. If anyone wanting to do it, you must buy the $110 bracket from the parts store and not just the motor. I mean could be cheaper on amazon but didn’t want to wait soooo yaaa... and be sure to know which regulator you need. Rear passenger or rear driver. As their all different . You’re welcome
Actually actually. I would take apart your door panel first, and see which regulator part you need first. They make 2 kinds. This as shown in the video and mine which is off an 05 tahoe
Why is it only the rear driver side one that fails? Mine failed twice in one year I recommend you by one at Autozone or Oreilleys in order to get a lifetime warranty on it. Because online might be cheaper but to get a warranty might be trouble
Infamous words, “ah shit”😂 said that a few times too changing mine out. Nice vid 🤙🏻
This was a perfect video. Had us laughing every time you cussed (my husband did the same). We fixed our own window thanks to you. You’re awesome!!!!
Lol!! No you are awesome!! You guys did it. Thank you for the comment. Have a great weekend. Stay safe and stay well
Really glad at the end when you cracked open the old one. I needed to see what was actually wrong with it rather than just a parts change.
Couldn't have fixed my mom's '03 Suburban without you.
I watched 3 other videos until I came across this one. Angel showed me exactly what I needed to do and what tools to replace the regulator in my 2003 Suburban. It really was easy! Thanks a "shitload" !
THANKS SO MUCH FOR SHARING THIS VIDEO! On my 2001 Suburban, I was able to replace the rear assemblies without having to remove the speaker in the door. OH, and do be careful with the power window switch/trim. I had one come apart and lost one of the tiny white toggle pins inside the window switch assembly (on a white gravel driveway). Off to Amazon garage to order a replacement.
This was really easy thanks to this video!! Really appreciate you for making this job for us hassle free!
Just replaced the regulator mechanism on my 2001 Suburban. Excellent, easy to follow video… thank you for your help! :)
Almost did the whole thing one handed. Had me laughing most of the time.
Outstanding! Now I'm comfortable doing it myself. Thanks a SHITload my brother! 😊
Thanks Angel! Was a quick fix for my 2000 Yukon XL with this video, awesome! I matched your aw shits, added a few new ones.
Thank you for all the trouble you went to in making the video. It's been a real help.
Thanks for the tutorial man. I said sh*t like 5 times to pay homage.
One of the best youtube fix it yourself videos I've seen in years
Good video. 👍🏼 Thanks.
That sealant is some sticky stuff. Use a utility knife to cut the sealant as you pull it away from the door about 1 inch. That way the sealant will stick to the same spot it came from.
Helpful Tip: The window motor will drain your car battery if you raise and lower the window too many times while testing it. Test your installed window motor with the car on. That way you don’t drain your car battery. It happened to a friend of mine. 😊
Professional. And you are nice enough to clean up after your self you can tell you have pride in what you do .. very helpful videos
Thanks! Less talk more work-- greatly appreciated! Had 2 S.O.Bs and 3 s**ts.
Love the suction cup to hold up the glass!
Excellent video. Made my change out easy and saved me a bunch of money. Thanks
Used this today! Easy is right!! Vid was excellent. Thanks for the post....
Shhhhhh.....it I'm glad you made this video! Probably just saved me $200-$300. Seriously great video!
Thank you for actuall showing what breaks on these. I watched a few videos and couldn't figure out WHY they would need to be replace. Both my rear windows on my avalanche will need this done. Ah shit....LOL
Many thanks.. Love the way you teach! Made my change out quite easy.
Worked like a charm. Thanks for your video.
Thank you for the video. You gave me the confidence to do both of mine. Thank you again,
THANK YOU YOU SAVED ME 280.00 DLLS IN THE SHOP
You had me at the highly relatable intro. 👍
Awesome video brother thanks. Just ordered parts to do this on my burban
Thanks for the video. Legit step by step very helpful. Just repaired my Yukon xl 03 rear passenger with ease. 👍🏽
welcome brother. please subscribe. have a nice day.
Great quality video. Your camera work and video editing increases the professional quality and instructional value!
Best video I’ve ever seen in my life your killin it
Excelent work You are a Genius i learn so much of You
Thx for the video man! Well deserved beer lol. Was gonna attempt this for my brothers truck but F-That!! He can watch this and do it himself Hahah
Thanks for the video man! Within the first minute of youre video I found out what my probkem was, thanks!
Good job man ur alot of help👍
Thank you Angel. You made it quick and easy.. For sure a liked video.
This is pretty good. Also if you need to change a speaker, window switch or door handle
EXCELLENT TUTORIAL MY FRIEND!!!!! THANK YOU!
Extremely helpful! Thank you Sir.
Just finished, thanks for the vid!
This video is great and helped me TONS! Thanks!
Great video!
Exact same window on mine!
More "shits" would escalate this video to the best instructional video ever made.....I'm just saying. Thanks bud, actually helped!!!!!!!!
Thahks for sharing, this video truly helped me out... caught myself using the “Aw shit” quite Often!!! 👍🏽 heck yea!!!
Thanks brother, you saved me a headache.
thank you Angel!!!! l recieved the door panel removal kit that you send!!!!!! thank you AWESOME video!!!!
Mine just ... fell .... right into the door. At the time, and since nobody really sits back there anyway, I just popped the door panel, unhooked the switch, and tied the window clamps to the door in the "up" position, but I will have to fix it at some point. I may cuss a little less (at least, that I'll admit here :) ), but I appreciate the video on doing this.
Awesome. Anyone noticed that he did the first half of this repair with one hand?!! 😂
Great guide on what to do and followed word for word as I cussed a few times trying to unplug the switch(fell apart but easy to put back together), u do the handle(broke skin on my index finger) and my God the damned sealer gets everywhere! Other than that it was cakewalk. Now to do the driver side tomorrow morning. Fml.
Thanks brother for the info it makes it easy to do
Wow a lot of work for this - good job, not sure I’m gonna tackle this SH*T myself🤣
Thank You Sir. I gotta replace my dads this weekend same exact door.
Thank you for sharing this video
Thanks for the video, excellent job. God Bless You.
you can use the sealant on your sockets or torx bits so the bolts or screws doesn't come off. i use it alot lol
Just replaced mine today, with your help. I also said "Ahhhh Shittt" a couple times. If you're not cursing, you're not doing it correctly.
Dude, that was very nice. Thanks
Nice video, thanks for keeping it real in the shop with your colorful commentary! Helped me get my window fixed and back in shape in 15 minutes.
Oooh 💩 good video I’m ordering mines on amazon and I’ll do it myself 👍🏽
You are the best Angel!
Thank you!
That was easy , nice job . I can stand that glue ! Piece of crap plastic parts.. thanks bro"
Thanks bro great video.
Thanks Angel! Going after my 2006 Avelanche. Both left doors are shit... LOL!
Great informative video thanks.👍👍👍
you sure made it look easy
Thankx bro..now i can save me the labor payout..im gonna fix mines now...
My 02 tahoe is different but great video bro gives me an idea of what i need
Great video! I have an 03 Tahoe and the door cut outs are smaller than yours. Did you cut them out to make them a little larger?
Damn..... Brother!!! You did a hell of a video... Only if you could do a 2011 Dodge Grand Caravan. Shit your video was F^(
Ohh shit! Good video👍🏽
literally signed into my account just to thumbs up for the already appreciated "ssshit" remarks... Classic situation all can relate to.
Thanx for the vid angel i wish i stayed in vegas my car needs some work
Thanks alot for the video.
Thanks Angel!
The parts you suggested would they work on a 03 tahoe?
Nice to see a local boy repair video. Oh shit, shaka brah, good video. Subbin
Great help thanks
This was great!
Youre the man
"Shit" or "oh shit"
My words when I'm working on cars too😂
This guy is the FUCKIN MANNNNNNN NECER HAVE I SEEN VIDEOS ON YT OF DIY LIKE THIS
Looks like he stay in Ewa 😎🤙
Wow I never thought of using a suction cup good bye masking tape
It sure seems you fix almost all the things. Just curiosity?? Is there things on any car that you can't fix it or rather not work on it? And what car maker do you think overall best designed in your view point?
Another awesome video
Yaaaa budddy, I did mines 1 handed for real lol, i forgot that when I unhooked the bracket, the window came down. While I had tape on standby, knowing my luck, it wouldn’t hold and prolly come crashing down, then another expense lol.... just stuffed a couple tools under it and held it with one hand while the other I installed the part. Mine was a little easier. An 05 tahoe takes 1 bracket. If anyone wanting to do it, you must buy the $110 bracket from the parts store and not just the motor. I mean could be cheaper on amazon but didn’t want to wait soooo yaaa... and be sure to know which regulator you need. Rear passenger or rear driver. As their all different . You’re welcome
Actually actually. I would take apart your door panel first, and see which regulator part you need first. They make 2 kinds. This as shown in the video and mine which is off an 05 tahoe
Why is it only the rear driver side one that fails? Mine failed twice in one year I recommend you by one at Autozone or Oreilleys in order to get a lifetime warranty on it. Because online might be cheaper but to get a warranty might be trouble
One Handed Playa!
Nice and clear... Thank You where can i buy...?
Great video @Fix It Angel --- how long did it take you to complete this job?
Would this be the same installation on an 06 avalanche?
Good stuff!
You da man.
great vlogs, new subscriber
I wish if kept the Bad word... otherwise perfect and clean work!
Except for the cursing, this is the perfect video. Thanks!
The only audio in this video are the same words I use consistently as I’m working on my cars. They say everything.
Weird I went look for the part and the one that keeps popping up only have one track. Yours has two tracks. Where did you order yours?
Adonis Bracamonte i found it on Amazon for $33 from Sunroad.
Dude great vid but get a tripod. This thing was hard to watch.
Ahhh....sshieett. lol
love it oh shitt