Hi and thaks for sharing. Did you succeed to ativate the steering wheel four directions arrow jostick on the right? Factory swtup for my Insignia (same year) does not support it nor can I activate it through SWC app. Other buttons are factory setup already. Ideas?
@@topnavi Many thanks for your reply. So, you succeeded in activating the four arrows and the middle "select" button on the right side of the steering wheel? You can move among icons (up, down, left, right) and select them without touching the screen? All from the steering wheel? If yes, please describe how. I can only use volume up/down, skip/back buttons, "phone" an "mute" buttons, but cannot figure out how to include arrows, so that, while driving I don't have to reach for the screen. Looking fireard to yur reply - best regards
Hi, great video. I'm considering to buy one, too. I'm wondering if you miss something from the old (Navi 900) system? Is there something you can not "set" or "use" or "see" anymore? How do you like using the device without physical buttons, especially for volume (now you have to tap)? Navi 900 shows importan radio, phone and navigation info also on the screen in front of the driver (where speed counter is)? Are those information using Junsun also there? What about voice commands. Do this work e.g. to call somebody? Thanks, Mitja
@@topnavi thank you. May I ask you wheather navigation, phone call info and radio info is still visible on driver’s screen at steering wheel? Like it can be seen now in connection Navi 900 radio.
Pero me informaron que hay que conservar el módulo porque tiene un enchufe (perdón, no sé el nombre correcto en español) que hay que enchufar. Cuéntanos tu experiencia instalando esta radio. Ella es importante para nosotros. !Gracias!
Hello, I need urgent help ! I also bought this radio. But I only have the r300bt as a series device. Can I still install the junsun radio? I plugged it in but it doesn't work.
the radio works as a head unit and it must be connected as well. I have the same radio and I have connected it and it works perfectly without losing any car settings
Its very hard to tell whats going on, all ive managed to do with mine is get it to power up and play music, but no steering wheel input, no sound for indicator, rev camera doesn't work, i know a yellow video comes with the kit but my camera connect into the cars side of the gray power plug. Any chance you could do a voice over your video instead of th music 😊
The video wasn't clear to me(minutes 6 to 8), especially when you connected the car OEM and the Android cables, I have the same system but could not figure out how to connect mine, can you make a better video at this stage?
@@maxschreiner1477 ja habe ich. Für die Kamera habe ich zwei Kabel hinter dem Tacho an einem Stecker abgegriffen. (die quadratische Stecker links am Kasten hinter dem Tacho
@@Lars-Gottwald Okay danke. Darf ich noch fragen wie sie die Lenkradsteuerung hinbekommen haben? Ich habe den mitgelieferten Adapter (rosa) zwischengesteckt und das eine längere Kabel am Kabelstrang angesteckt - funktioniert aber leider nicht 🫠
Hola tu video es el mas util que he visto. Pero no veo como compruebas la pantalla, por debajo de la guantera.. No veo lo que haces y tengo medio coche desmontado y no me va la pantalla. Y encima ya no me va ni la radio.. Me podrías ayudar? He comprado una Hodozzy android radio. Y no se si me hacen falta conecsiones
Ce model e..?? Am aceeasi problemã (ecran negru dar se aude radioul) si vreau sã-l schimb cu totul. Mã gândeam sã schimb doar ecranul dar nu cred cã se meritã.. 😉 Multumesc anticipat! 😉
Hi, great video but I am not able to see all connections you made. I am trying to install a Junsun V3 plus but it does not power on. I have used the cable with the Canbus box connecting the big green (labeled HRD-085) and big black connectors to the car and the small black power connector to the radio but it does not power up. What am I missing to connect?
Hi, i update my junsun v1 pro, and now, i can't enter in menu fábrica, because when i touch de number to enter the code, the numbers don't not appear in thw screen, as if I didn't press anything, Should I reset to factory and not update?
I know you got the Junsun, but ive got a few questions about it. 1. How much did it cost? 2.Where did u buy it? 3. Has it got Cinch (RCA Jack) for ur Audiosystem? Thank u very much🙏🤝
Hello. May I know what model of Juansuna it is and whether all factory settings of the car work, steering wheel control, rear view camera and usb armrest?
Great video. Will the parking sensor display also work informing which sensor is closer to the object..etc? And all the car configurations that are available via the original settings menu of the Opel head unit? Thanks for the info!
Where is the connection to the original back camera? There is no connection 😢 when i put back the handle to reverse position it says no connection to camera.
Hi. I just installed Junsun V1 Plus and have some questions: - Which exact car GM model did you choose as a Canbus type (210 and which subselection works fine for Astra K Navi 900)? - Original USB socket under the hand container does not work for me (maybe attached cable is broken!? I'm in contact with the seller). - There is a hissing sound coming from the rear speakers (front speakers work fine). - Is it normal that all Radio stations, Dashboard shortcuts, etc get lost when you change something in the car android settings (under code 8878)?
It just selects the first item. I do not think it can detect the correct model. Did you have any experiences with the constant annoying noise from back speakers? And whether this is hardware, Canbus or firmware issue?
@@ahmedarfaoui3293 hi. I did solve the problem 😊. There is an issue with two wires, white and red wires on 8-pin white plug. This is a new wiring that comes beside the Junsun package. 8-pin plug is attached at the back of Junsun device. You probably have OnStar module in the car and in that case those two wires are attached to the original car wiring that comes from the OnStar module. What I did is I detached pins of those white and red wires from the black harness of the new Junsun wiring. This black harness comes attached to the original car's gray harness at the passengers side (where Navi 900 head unit is located). The original OnStar wires on the gray harness are colored yellow and white, and are located on pins 19 and 20 on the original gray harness. You can also cut those two red and white wires, but detached pins from the harness can be attached again if needed. That way disabling the signal coming from original OnStar yellow and white wires helped to go the noise away. This OnStar signal was probably wired incorectly by Junsun and causes noise in back speakers. I would send pictures of the wires and harness, but I can not attach anything here.
@@mitjam hi friend thank you for your help did you manage to have the steering weel command working? my canbus settings are correct but they still not working
J'ai une opel astra k et j'ai comme projet de changer mon autoradio par un de la marque Junsun. Quand vous avez changé le votre, avez-vous pu conserver la caméra de recul d'origine ?
@@topnavi Da, intru in setari dar nu reusesc sa setez can'ul ca sa-mi funcționeze tot pe masina cu niciun cod din lista. Am incercat 21, 239...etc, mai tot ce era de Opel si GM. Mulțumesc pentru răspuns!
@@tpc1661 Am vorbit cu chinezul si mi-a trimis adaptorul pentru comenzile volan, insa nu a ajuns, probabil dupa Pasti. Din China dureaza 3 -4 saptamani pana ajunge 😊
@@topnavi You can never have enough of anything! expandable storage is always a welcome addition, also if the device can read from external storage is another big plus.
Hi, is this multimedia compatible with original rear camera, and bordcomputer, does it have any incompatibilities with original car multimedia parts like camera, speedo, etc.?
@@yy_padrinho_yy9161 Vale muito a pena! O novo equipamento tem muito mais recursos, tem todos os recursos de conexão sem fio e acesso a internet. Trabalha com os comandos do volante. O único senão é que a telinha do painel não conversa com o rádio mas todas as outras funções estão ok. Se eu conseguisse o esquema elétrico e de comunicação do meu astra, eu conseguiria resolver essa limitação.
Hi and thaks for sharing. Did you succeed to ativate the steering wheel four directions arrow jostick on the right? Factory swtup for my Insignia (same year) does not support it nor can I activate it through SWC app. Other buttons are factory setup already.
Ideas?
The canbus works perfect, and steering wheel works perfect
@@topnavi Many thanks for your reply. So, you succeeded in activating the four arrows and the middle "select" button on the right side of the steering wheel? You can move among icons (up, down, left, right) and select them without touching the screen? All from the steering wheel?
If yes, please describe how. I can only use volume up/down, skip/back buttons, "phone" an "mute" buttons, but cannot figure out how to include arrows, so that, while driving I don't have to reach for the screen.
Looking fireard to yur reply - best regards
Hi, great video.
I'm considering to buy one, too.
I'm wondering if you miss something from the old (Navi 900) system? Is there something you can not "set" or "use" or "see" anymore?
How do you like using the device without physical buttons, especially for volume (now you have to tap)?
Navi 900 shows importan radio, phone and navigation info also on the screen in front of the driver (where speed counter is)? Are those information using Junsun also there?
What about voice commands. Do this work e.g. to call somebody?
Thanks, Mitja
Is perfect for use
@@topnavi thank you. May I ask you wheather navigation, phone call info and radio info is still visible on driver’s screen at steering wheel? Like it can be seen now in connection Navi 900 radio.
Hi @topnavi. Does the original USB plug under the hand container work with Junsun?e
Yes
Mandos del volante no respondem en la pantalla, he elegido can bus raise, opel, astra k y sigue sin funcionar que can bus elegiste?
Our works perfect
How did u know were to put the extra wire under the dashboard ? Was there a Manuel whit it ? What do i recomand on ram memory ?
We are authorised shop, we know how to wire it
Do you know maybe my same android radio dosen't paring steering wheel whit android units
Hola la ,el marco que se adapta al apple carplay, tienes enlace,donde lo puedo adquirir para instalar el junsun v1 pro? Gracias
Hallo topnavi habt ihr eine Anleitung zum installieren der Kabel. Ich komme nicht weiter. Im Video sieht man nicht alle Kabel.
Only this
Hi
Hello which canbus protocol do you use for astra k?
Hiworld Astra K
@topnavi which CAN type number is for Hiworld Astra K?
El módulo original de la radio no lo necesitas para nada, lo puedes quitar. Yo tengo astra k y radio android te lo digo por experiencia
You need It, trust me.
Pero me informaron que hay que conservar el módulo porque tiene un enchufe (perdón, no sé el nombre correcto en español) que hay que enchufar. Cuéntanos tu experiencia instalando esta radio. Ella es importante para nosotros. !Gracias!
Hello, I need urgent help ! I also bought this radio. But I only have the r300bt as a series device. Can I still install the junsun radio? I plugged it in but it doesn't work.
Yes It works also with r300bt, maybe you are not connecting It well
OK. I have the same problem. Not working😢
the radio works as a head unit and it must be connected as well. I have the same radio and I have connected it and it works perfectly without losing any car settings
Alguém me pode informar as ferramentas necessárias? Além da peça para retirar os plásticos c
No tools
How about steering wheel buttons
Niño la próxima vez que hagas un vídeo intenta que veamos lo que contentas y demás GRACIAS...
What?😅
Mine already has a rear camera, will it work?
Yes
Danke!
👍🏼😁
eu nu am conectorul de la avarie.. la navigatorul meu am acelasi model
Sunt mai multe modele
bello
😁
Per la opel crossland . Ai qualcosa ?
Can anybody do this for me?
Looks simple to be honest
@@vamp5516 the wiring?
😁😁
Con questo impianto riesci poi a gestire tutte le impostazioni per l'auto? O vanno perdute
Yes, still works
witch monde ladroind use and about the buttons in the weel working all?
Its very hard to tell whats going on, all ive managed to do with mine is get it to power up and play music, but no steering wheel input, no sound for indicator, rev camera doesn't work, i know a yellow video comes with the kit but my camera connect into the cars side of the gray power plug. Any chance you could do a voice over your video instead of th music 😊
😁
Bei den wichtigsten Punkten sieht man nichts. Gibt es noch ein anderes Video wo auf die Anschlüsse mehr eingegangen wird?
How that?
Das Problem haben wir alle.....gerade was die Kamera und Fernbedienung angeht.
The video wasn't clear to me(minutes 6 to 8), especially when you connected the car OEM and the Android cables, I have the same system but could not figure out how to connect mine, can you make a better video at this stage?
Every cable îs plug and play tou dont have how to wire It wrong 😁
Funktioniert die Lenkrad Fernbedienung? Ich habe keine Anschlüsse dafür gefunden.
@@Lars-Gottwald geht mir genauso. Haben sie eine Lösung gefunden?
Ebenfalls funktioniert die Rückfahrkamera bei mir nicht bzw. findet kein Bildsignal.
@@maxschreiner1477 ja habe ich. Für die Kamera habe ich zwei Kabel hinter dem Tacho an einem Stecker abgegriffen. (die quadratische Stecker links am Kasten hinter dem Tacho
@@Lars-Gottwald Okay danke. Darf ich noch fragen wie sie die Lenkradsteuerung hinbekommen haben? Ich habe den mitgelieferten Adapter (rosa) zwischengesteckt und das eine längere Kabel am Kabelstrang angesteckt - funktioniert aber leider nicht 🫠
How much I'm in Rotherham South Yorkshire on 2020 plate astra elite 1.2 torbo how mucand when please.
Link in bio
Hola tu video es el mas util que he visto. Pero no veo como compruebas la pantalla, por debajo de la guantera..
No veo lo que haces y tengo medio coche desmontado y no me va la pantalla. Y encima ya no me va ni la radio..
Me podrías ayudar?
He comprado una Hodozzy android radio. Y no se si me hacen falta conecsiones
Îs îs not power on maybe îs the wrong wire
Lo mismo me pasa tengo medio coche desmontado y no se que conexión hacer abajo
Ce model e..?? Am aceeasi problemã (ecran negru dar se aude radioul) si vreau sã-l schimb cu totul. Mã gândeam sã schimb doar ecranul dar nu cred cã se meritã.. 😉 Multumesc anticipat! 😉
Salut, in BIO și pe www.topnavi.ro gasesti contact și ne poți contacta pentru INFO
Looks unbelieveably cheap and slow
Hi, great video but I am not able to see all connections you made. I am trying to install a Junsun V3 plus but it does not power on. I have used the cable with the Canbus box connecting the big green (labeled HRD-085) and big black connectors to the car and the small black power connector to the radio but it does not power up. What am I missing to connect?
Hello
Great video for Disassembly and Reassembly, but I can't see the connections. Can you show a photo of the connections? Thank you so much
Contact us în privat
Hi @topnavi You can share with me the directions too?
I'd rather buy another car
Hello topnavi. My astra has r300bt radio but dont find head unit . it is not under the passenger case.
Any idea please?
Glovebox
@@topnavi the head unit is the radio. how connect it?
Hi, i update my junsun v1 pro, and now, i can't enter in menu fábrica, because when i touch de number to enter the code, the numbers don't not appear in thw screen, as if I didn't press anything, Should I reset to factory and not update?
Yes, you can do that
Hallo funktioniert die auto einstellen auch im Radio und die orgiale rückfahrkamera
Ich bekomme kein Signal von der originalen Rückfahrkamera
Hola podría decirme que conexión se hace abajo en la caja detrás de la guantera 😊
Power Connect
I know you got the Junsun, but ive got a few questions about it.
1. How much did it cost?
2.Where did u buy it?
3. Has it got Cinch (RCA Jack) for ur Audiosystem?
Thank u very much🙏🤝
We sell them on www.topnavi.ro You can check It, Yes the unit have RCA
Hello. May I know what model of Juansuna it is and whether all factory settings of the car work, steering wheel control, rear view camera and usb armrest?
Junsun v1 pro, the unit came allready set It up with all settings
Great video. Will the parking sensor display also work informing which sensor is closer to the object..etc? And all the car configurations that are available via the original settings menu of the Opel head unit? Thanks for the info!
Yes, all works perfect also on android headunit
Hallo ich suche jemand der schon beim Mokka X 2018 schon Android Radio eingebaut hat?
Not yet
Where is the connection to the original back camera? There is no connection 😢 when i put back the handle to reverse position it says no connection to camera.
Hi, i can't find it at your website to buy it, can you help? Thanks
Hi. I just installed Junsun V1 Plus and have some questions:
- Which exact car GM model did you choose as a Canbus type (210 and which subselection works fine for Astra K Navi 900)?
- Original USB socket under the hand container does not work for me (maybe attached cable is broken!? I'm in contact with the seller).
- There is a hissing sound coming from the rear speakers (front speakers work fine).
- Is it normal that all Radio stations, Dashboard shortcuts, etc get lost when you change something in the car android settings (under code 8878)?
Canbus must be automatically select
It just selects the first item. I do not think it can detect the correct model.
Did you have any experiences with the constant annoying noise from back speakers? And whether this is hardware, Canbus or firmware issue?
@@mitjam hi i have the same problem did you know how to solve the noise problem
@@ahmedarfaoui3293 hi.
I did solve the problem 😊. There is an issue with two wires, white and red wires on 8-pin white plug. This is a new wiring that comes beside the Junsun package. 8-pin plug is attached at the back of Junsun device.
You probably have OnStar module in the car and in that case those two wires are attached to the original car wiring that comes from the OnStar module.
What I did is I detached pins of those white and red wires from the black harness of the new Junsun wiring. This black harness comes attached to the original car's gray harness at the passengers side (where Navi 900 head unit is located). The original OnStar wires on the gray harness are colored yellow and white, and are located on pins 19 and 20 on the original gray harness.
You can also cut those two red and white wires, but detached pins from the harness can be attached again if needed.
That way disabling the signal coming from original OnStar yellow and white wires helped to go the noise away. This OnStar signal was probably wired incorectly by Junsun and causes noise in back speakers.
I would send pictures of the wires and harness, but I can not attach anything here.
@@mitjam hi friend thank you for your help did you manage to have the steering weel command working? my canbus settings are correct but they still not working
J'ai une opel astra k et j'ai comme projet de changer mon autoradio par un de la marque Junsun. Quand vous avez changé le votre, avez-vous pu conserver la caméra de recul d'origine ?
Yes
Auriez-vous le tuto pour installer l’autoradio svp ?
Hazard lights, I have nowhere to connect it to in the car
😳😳
hi is it plug and play method of installation? any cutting of wires?
Yes
How did you connect FM antena? Can you use the original One?
Yes with adaptor
Does it support apple?does it have bluetooth connectivity?
Yes and Yes 😁
But not for IntelliLink900 right? All OEM SystemInformation will be works?
C compatible avec opel crossland x 2020 ??
No
Schön die Kamera verdeckt beim fuchteln unter dem Handschuhfach :-)
Nope
Chinajunk
Ist die silverbox für diesen Radio notwendig?
Yes
What Is the name of the radio you have installed?
Junsun
Hola vale para un opel grandland x
Nope
One question. Why doesn't my steering wheel control work?
You didnt connect It right maybe 🤔🤷🏼♂️
@@topnavi Rather correctly because there is not much to connect there and everything fits together
Îs not so easy, not only plug and play, steering wheel had to be wired directly, not with canbus
@@topnavi Well precisely through canbus does not work, that is, do you know how to do it?
U have navi 900 or r4 intellilink?
The old radio was Navi 900
Salutare! Am instalat si eu un display asemanator si nu reusesc sa setez CAN Type'ul. Ce cod ai bagat? Mulțumesc si bun materialul.
8888 este codul pentru setări can
@@topnavi Da, intru in setari dar nu reusesc sa setez can'ul ca sa-mi funcționeze tot pe masina cu niciun cod din lista. Am incercat 21, 239...etc, mai tot ce era de Opel si GM. Mulțumesc pentru răspuns!
Pentru preluare comenzi volan sunt necesare modificări și un cablu adaptor pentru comenzi volan
Ai rezolvat?
@@tpc1661 Am vorbit cu chinezul si mi-a trimis adaptorul pentru comenzile volan, insa nu a ajuns, probabil dupa Pasti. Din China dureaza 3 -4 saptamani pana ajunge 😊
Wie lautet Ihre genaue Adresse?
România
Looks easy.
Yes 😁 looks…
I wonder can external storage be added to it ?
This have 128gb, i think îs enough 🤔
@@topnavi You can never have enough of anything! expandable storage is always a welcome addition, also if the device can read from external storage is another big plus.
@@vamp5516 👍🏼😁
Come si chiama il modello di radio che hai montato xke anch'io o lo stesso problema ma non so la radio che puo andar bene... Grazie
Junsun
Quanti pollici hai ? Ma quindi sarei in grado anch'io di montarla senza rivolgermi a un elettrauto?
Looking good !
But after that you can't really change comfort car settings which isn't so great.
Yes you can 😅
Hi, is this multimedia compatible with original rear camera, and bordcomputer, does it have any incompatibilities with original car multimedia parts like camera, speedo, etc.?
Yes It îs compatibile with original system and accesories
I have no power going to my unit after install?
Maybe You made something when You wiring It 🤷🏼♂️
Is the original backup camera compatible with the radio?
Yes
Parabéns pelo vídeo! Me ajudou muito na escolha e na instalação do aparelho que foi feita pelo próprio vendedor. Vídeos com esse ajudam muitíssimo.
Thank you
Boa noite desculpe a pergunta mas já fez a troca dos rádios ? O que achou ? Vale a pena obrigado
@@yy_padrinho_yy9161 Vale muito a pena! O novo equipamento tem muito mais recursos, tem todos os recursos de conexão sem fio e acesso a internet. Trabalha com os comandos do volante. O único senão é que a telinha do painel não conversa com o rádio mas todas as outras funções estão ok. Se eu conseguisse o esquema elétrico e de comunicação do meu astra, eu conseguiria resolver essa limitação.
100%
Would this work with reverse camera?