I was going to finish it so I put it in the bucket of my tractor to bring it in the shop and it fell of the bucket, hit the ground and broke in half. So I burned it. :(
Good video. Gives ideas for my 45’ pine tree that fell in my yard. Only thing is you have all the toys, I don’t. So I’ll have to figure it out Greetings from Los Angeles
@@flycorvus Mit tudsz Te rólam, így ismeretlenül?? Nem kenyerem a hazugság!!Már 17-évesen javítottam a gépeket!!A faluban csak Apu és Én javítottuk a gépeket!!!
That is one awesome chair. A lot of hard work going into making it. I commend you for your dedication to making a beautiful work of art from a section of a tree trunk. Looking forward to the next video. Thanks so much for sharing your talent with us.
عذرا للكتابه باللغه العربيه ...... المهم توصيل النصيحه . من الأفضل أن تترك الخشب على الأقل شهر فى الفضاء حتى يجف او فى فرن تجفيف لمدة 10 أيام ثم يتم التصنيع بعد ذلك أفضل حتى تظهر عيوب التجفيف بعد التصنيع و يذهب جهدك هباء .وشكرا جزيلا على مجهودكم وبالتوفيق دائما
Just watched the video, shame about the mishap with the tractor. But golly gee that drawknife is so sharp, the thin slices it was removing...I've seen thicker potato chips (we all them crisps here in UK) in a bag!!
hate it at the end, cant see the finish product because two large pop-up youtube videos appear blocking almost the entire screen. this happen often when i see diy craftmanship videos like this.
Would have looked better if you left the bottom solid, three legs ? uhn you lost me there. Possibly carve the chair back spindles in place, and possibly four legs with more detail ?
![How to build a log bench without nails [indoor-outdoor]](http://i.ytimg.com/vi/pX_T6DcCKU4/mqdefault.jpg)
When can we see the finished chair? Looks nice so far!
I was going to finish it so I put it in the bucket of my tractor to bring it in the shop and it fell of the bucket, hit the ground and broke in half. So I burned it. :(
Oh no!
Oh noooooo! Did you have to re start?
immaculatelation
Looked at it again....you worked hard on this one Gilbert....that Thurmond planner is something to have.....CHEERS
Thanks Gator. Y’a quite a bit of work but that video got lots of views so was worth it. Cheers!
Good video. Gives ideas for my 45’ pine tree that fell in my yard. Only thing is you have all the toys, I don’t. So I’ll have to figure it out
Greetings from Los Angeles
Szia Én is csináltam ilyen rönk ülőkét,még gyerek koromban,az volt az első munkám,tetszik a videó!😊👌👍🌲🍻
Gyerekkorodban?
Mivel? Fonalfűrésszel, jógyerek?
Vagy a kezedbe adtak egy Stihl 045 AV-t?
:-)
@@flycorvus Mit tudsz Te rólam, így ismeretlenül?? Nem kenyerem a hazugság!!Már 17-évesen javítottam a gépeket!!A faluban csak Apu és Én javítottuk a gépeket!!!
That is one awesome chair. A lot of hard work going into making it. I commend you for your dedication to making a beautiful work of art from a section of a tree trunk. Looking forward to the next video. Thanks so much for sharing your talent with us.
What a beautiful piece of art.Love you're videos....
Without a doubt this is the nicest chair I've seen cut out of a log. Absolutely great job! Thanks for sharing.
Great job. But you had all the toys to play with
Love this beautiful chair. Very clever!
Buen trabajo amigo,👌👌
👏👏👏muito bom trabalho.
Great video can't wait to start on this project!!! Thanks!!!
cool job. what is disc used for the angle grinder?
Love It!
After watching all of that, we did not get to see the chair at the end for the other two videos.... Great Job making it tho
May I ask what brand is your wood shaving plane ?
Спасибо друг классная работа
I'm doing this over the weekend with Helene logs.
Very nice chair! Hello from Russia - space of woods!
Was the tree still green or was it dried?
It would look better with a solid bottom just my opinion
True surreal tho!
That’s what I thought too, leave it solid. Plus it would have saved him work.
Great video man ,good job greetings from Romania cheers.
SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO GOOOOOOOOOOOOOOOOOOOOOOOOOOOD!!!!!!!!!!!!!!!!!!
Beautiful chaiir.
Lindo trabalho. Parabéns.
Great work
Can you Make the chair visible. The advertisements are blocking the finished product.
Great job and video. Waiting for part two. 👍
Nice work. What is that blade called on your grinder?
Turbo planner
Uma obra de arte perfeita gostei
I would have enjoyed seeing the finished product...
Nice chair, in Norway we holow them out from the underside and peint them in roses patern after old custom.
Thank you!
mucho esfuerzo, no se justifica tanto trabajo para hacer algo tan elemental
Bonito trabajo felicidades desde baja california sur mexico
looks like a fun project.
Muchas Felicidades, un gran trabajo Saludos desde Barcelona Catalonia
Do you know how tall it was and the diameter ??:)
Is it going to be stable with three legs?
Parabéns saudações do Brasil.
Parabéns ficou ótimo.
😁😁😁 ces trop super ça
Where did you find the spokeshave?
jujijo16 it's a drawknife. Leevalley.com $60.00
Fffffff frumos
Perfect !!!
Man,that draw knife is sharp!
he is using it wrong the blade should be the other way
nice chair. ..congratulations. like
Awesome Sir I Like It
I THINK it looks nice, but there were popups for other videos covering the reveal at the end so I couldn't get a good view of it :-(
on the last part 6:26 it looks like cutting cheese!! LOL
The draw knife on the end grain was very satisfying, it look like you were shaving soap
Very good!
Terrific!
What kind of wood is that?
Aspen
How long did the log have to dry before you started cutting?
The tree had been cut 7 months before. I Can't see why you couldn't carve immediately after cutting the tree.
Omg so cool
Sharpen a 3/4 inch boxed end wrench best kind .
good job...
Lindo trabajo de arte
The draft knife getting pulled across the footing looked like shaving cheese. That was awesome and now I'm hungry.
عذرا للكتابه باللغه العربيه ...... المهم توصيل النصيحه . من الأفضل أن تترك الخشب على الأقل شهر فى الفضاء حتى يجف او فى فرن تجفيف لمدة 10 أيام ثم يتم التصنيع بعد ذلك أفضل حتى تظهر عيوب التجفيف بعد التصنيع و يذهب جهدك هباء .وشكرا جزيلا على مجهودكم وبالتوفيق دائما
هلابك
Perfeita
Great hard job 👍
Watch the whole video in anticipation of your finished product and you put links on top of it.
Just watched the video, shame about the mishap with the tractor. But golly gee that drawknife is so sharp, the thin slices it was removing...I've seen thicker potato chips (we all them crisps here in UK) in a bag!!
DEUS te abençoe 🙏
What wood is this?
Aspen
Thanks
Cool, où as_tu appris à faire ça?
Un peut sur RUclips et un peut dans ma tête. :)
Fantastic....
Gastaste mucha madera, para una simple silla..... no crees?
hate it at the end, cant see the finish product because two large pop-up youtube videos appear blocking almost the entire screen. this happen often when i see diy craftmanship videos like this.
can't see it finished theres are promotions of other videos over it.
dum
couldn't see finished product because of your ads of other stuff done.
upss very nicee..:)
Wow....good
Muy buen trabajo
Alguien me puede decir que tipo de madera es
I wish I did that instead of making wood chips
Good job
много труда и энергии а стул ни о чем.
Good man
Verynice
Muy bien pero falto la lijada
I Like Super
Золоті руки. Це по Українській
Awesome job
I might fix a bowl of cream of wheat
I think it's an inestable chair
Respect frate
Good lumber support
Would have looked better if you left the bottom solid, three legs ? uhn you lost me there.
Possibly carve the chair back spindles in place, and possibly four legs with more detail ?
Ya I really messed it up with those legs.
Nice woods art fall river springs
Hooo,exelente
That log Barber chaired😉
No se puede ver la silla terminada......
Bravo
Mucha madera para una silla to much wood only one chair
Hard work is found but, the end product is not attractive.
Какой хуйней только люди не занимаются
Каком городе так делають
А как его сушить?
Muito Bom
Пока наведешь порядок на поляне,стул уже полопается
.