utilice alambre de aluminio de 1 mm de grosor lo puedes comprar en panda hall ahí compro yo y te lo envían a todo el mundo te dejo el enlace www.dpbolvw.net/click-101090564-15734226 SI HACES LA COMPRA DESDE EL ENLACE AYUDAS A QUE SIGA CREANDO TUTORIALES COMO ESTE GRACIAS GRACIAS GRACIAS A TODOS
Hace poco empeze a ver tu canal y en verdad que mi Diosvte siga Bendiciendo tu gran talento. Quisiera saber en donde puedo ordenar el materia de alambre para poder seguir aprendiendo contigo. Estoy en México y quisiera saber si puedo hacer pedidos de donde tu compras tus materiales mil gracias y muchas bendiciones
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
The end product is very pretty but the video made me nervous. I don't mean to be rude because I appreciate you making a video on trees. It was tedious and I'm sure many people liked it. It seemed to me that it took a long time. I apologize. You do beautiful work ✌️
Esto es ya otro nivel amigo muy bonito quedo ese bonsai sera mi proximo proyecto saludos por cierto te mande por email las fotos de mis bonsais echos espero los hayas visto q tu canal siga creciendo tu fiel.seguidor 👍
Si dame un tiempo para hacer una cuenta q no tengo y yo te aviso por aca en mensajes amigo cuidate y gracias por compartir todo tus conocimientos 👍👍👍👍👍👍
Disculpa me queda una pregunta por hacer al empieso cuando haces el tronco añades una parte ya con cinta adhesiva q tamaño es esa pequeña parte creo debe ser mas larga de 20 pulgadas verdad
Hola qué tal es de aproximadamente 10 cm como lo mido es lo que me quepa en el puño donde termina ahí le pongo la cinta es solo para irme guiando y que no se me complique trenzar el árbol saludos amigo
Las vueltas que le doy no las cuento porque uso todo el carrete de 250 gr que son aprox 100 metros de alambre pero si te puedo decir que tiene aproximadamente unos 300 hilos saludos
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
Is it the same gauge wire and the same length for each wire that made the tree as well as the coils? Or did you use longer wires for the tree part than you used for the coils? I've mmade other types of trees, but it's my first attempt at making a bonsai style tree, and I want to get it right 🙂.
utilice alambre de aluminio de 1 mm de grosor
lo puedes comprar en panda hall ahí compro yo y te lo envían a todo el mundo te dejo el enlace
www.dpbolvw.net/click-101090564-15734226
SI HACES LA COMPRA DESDE EL ENLACE AYUDAS A QUE SIGA CREANDO TUTORIALES COMO ESTE GRACIAS GRACIAS GRACIAS A TODOS
Hola yo ya hice uno para un regalo y me quedo hermoso 😊
Ola me ayudas a saber como se llama ese alambre
Hace poco empeze a ver tu canal y en verdad que mi Diosvte siga Bendiciendo tu gran talento. Quisiera saber en donde puedo ordenar el materia de alambre para poder seguir aprendiendo contigo. Estoy en México y quisiera saber si puedo hacer pedidos de donde tu compras tus materiales mil gracias y muchas bendiciones
Quedo divino, felicidades
Muchas gracias un gran saludo
Beautiful tree. And it’s not easy. 🤦♂️. I started one. using thick copper wire. You make it look so easy. But it’s amazing !!!! ✊
Gracias amigo es que la práctica hace al maestro sigue intentándolo que vas a lograr cosas increíbles
Siempre es un gusto observar tu arte que además es inspirador, saludos.
Muchas gracias amigo por tu tiempo un gran saludo
Hermoso trabajo me encantaría que hiciera una wisteria o glicinia❤❤
Me encanta esta manualidad hace algunos años atrás aprendí hacer algunos arbolitos , fue algo muy básico pero es algo maravilloso y relajante
Hola hermoso muy hermoso
Trabalho maravilhoso!!!
Hello... I'm one of your subscribers. Would you be able to tell me what type of wire you are using and where to buy them. Thank you...
Que precioso quedó. Es una obra de arte. Que tipo de alambre usa y donde lo puedo comprar.
Hola en la descripción del video está el enlace de panda hall es donde compro los alambres lo buscas como alambre de aluminio 1 mm
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
The end product is very pretty but the video made me nervous. I don't mean to be rude because I appreciate you making a video on trees. It was tedious and I'm sure many people liked it. It seemed to me that it took a long time. I apologize. You do beautiful work ✌️
Lindo
Esto es ya otro nivel amigo muy bonito quedo ese bonsai sera mi proximo proyecto saludos por cierto te mande por email las fotos de mis bonsais echos espero los hayas visto q tu canal siga creciendo tu fiel.seguidor 👍
Hola amigo claro que si los vi están bien chingones cuál es tu usuario de Instagram para que te etiquete las voy a subir al Instagram amigo
Si dame un tiempo para hacer una cuenta q no tengo y yo te aviso por aca en mensajes amigo cuidate y gracias por compartir todo tus conocimientos 👍👍👍👍👍👍
Bnas noches una pregunta dónde queda panda Hall donde puedo conseguir el NRO de tl x favor
How many wires did you use at 20 inches long? And, What gage wire?
Disculpa me queda una pregunta por hacer al empieso cuando haces el tronco añades una parte ya con cinta adhesiva q tamaño es esa pequeña parte creo debe ser mas larga de 20 pulgadas verdad
Me hago la misma pregunta??? Seria conveniente si puedes contestar esta importante pregunta y cuantas vueltas das al rededor de los tubos de pvc.
Hola qué tal es de aproximadamente 10 cm como lo mido es lo que me quepa en el puño donde termina ahí le pongo la cinta es solo para irme guiando y que no se me complique trenzar el árbol saludos amigo
Las vueltas que le doy no las cuento porque uso todo el carrete de 250 gr que son aprox 100 metros de alambre pero si te puedo decir que tiene aproximadamente unos 300 hilos saludos
Can you please make a tree without using all that wire
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
How many wires did you use at 20 inches long? And, What gage wire?
How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
I apologize in advance because I have several questions.... here goes... How many wires did you use at 20 inches long? And, What gage wire? How many pieces did you use to do the coils, and at what length? Are the coils made with the same gage wire as the trunk and branches? And about what size around is the tool you used to make the coils? Thank you in advance if you are able to answer my questions! And, You did an awesome job on this tree... Thanks for sharing the process step by step!
Hi 1 mm aluminium wire 250 pieces 35 cm each regards
Thank you.
Is it the same gauge wire and the same length for each wire that made the tree as well as the coils? Or did you use longer wires for the tree part than you used for the coils? I've mmade other types of trees, but it's my first attempt at making a bonsai style tree, and I want to get it right 🙂.
Can you tell me what the circumference of your tool for making the coils is? I'm having difficulty finding the right size tool to use 🫤
Nice sir so beautiful bonsai made by wire thanks for sharing ❤ godbless you 💕