Atm ganito din prob ng wmachine namin at same tayo ng brand at model sa kg lang nagkaiba saamin 7.0kg yang sa nirepair mo 7.5. Hope maayos din ng mister ko itong samin dahil naulan pa nman hirap magkamay ng labahin. Ty sa video mo. ♥️😇😊
I think that spring is for the dooor support. mine don't have one so its not on the video. Once you cleaned the switch, you run the machine even without the spring
I think that spring is for the dooor support. mine don't have one so its not on the video. Once you cleaned the switch, you run the machine even without the spring
You can try search it online. Lazada, shopee. aliexpress. Connecting the switch wire directly also cqn make it run but there are safety risk as it will not stop once open or unbalance
Ang alam ko po is yan din lever na yan ang magti trigger ng stop or slow kapag di balanse ang labada. So kung wala yan baka magwala washing machine nyo kapag ngspin
@@pinoydiyguy sir non nag DiY po ako bigla po siya natangal pero nalagay ko din nman po siya kso non try ko siya mag spin nag eror po siya lumabas po yun U 12 po
Not sure about the cover sensor exact name. You can check your existing part, there should be product code on its body which you can use to search the item
Kapag naputol yung plastic na lever hindi po mag cause ng u12 alarm. Di rin po sya magaalarm kahit bukas ang cover. Kailangan kasi matrigger ang lever para mag alarm
Yung short lever para sa cover. Yung long lever, sa tingin ko is para madetect at mahinto agad ang machine kapag ngwobble ng sobra ang tub or nawalan ng balance (siguro)
I think you can buy the push button in online app like lazada. The problem is you have to check the type of button and you need someone who can solder it. Just send it out for repair is easier
@@mex7037 sa bandang 5:00 po ng video may pinakita ko parts ng washing machine.yun pong water level sensor nyo malamang is faulty.check nyo kung may choke ba or palaging nakatrigger. di ko pa po natry to pero yun lang nakikita ko related sa alarm na yan.
Na verify nyo po ba na nagdidikit yung dalwang metal plate sa loob? Parang switch lang din po ng ilaw yun principle non. Linisin nyo din po wire connection
Sir tanong ko lng po, nalinis ko na po ung door sensor switch. May u12 error parin po sya. May spring po ksi sya na nalaglag nung binuksan ko ung cover. Saan po kya nkalagay yon.
Make sure lang po nagkakadikit yung 2 metal plate ng door sensor. Kapag ayaw pa din. Pwede rin po try pagconnect directly yung wires ng sensor kapag nag ok, check nyo ulit sensor malamang di nagdidikit yung contacts. Sa spring naman kahit po wala na non. Alam ko kasi support ng door yun.
Sino ba nagsabi sayo lagi ko ginagawa yan? Kung may nahalata ka, e di wow. Magaling ka siguro, araw araw ka siguro nagkakalas nyan. Sa yabang mong yan may naitulong ka ba? Ako sigurado may natulungan ako sa video na ito. Salamat sa panonood.
Very helpful, naayos ko yun sa akin, cleaning lang ng contacts, liha and contact cleaner. Thank you for sharing.
Thanks ,from Panamá ,Chitre ,Herrera .... Yes it Worked for me like Friend
welcome. I'm happy that my video is helping many people
Thank you po kala ko di ko magagawa. Salamat ayos na waching ko. Makakapaglaba na po ako bukas. Salamat po sa pagshare ng video.
Atm ganito din prob ng wmachine namin at same tayo ng brand at model sa kg lang nagkaiba saamin 7.0kg yang sa nirepair mo 7.5. Hope maayos din ng mister ko itong samin dahil naulan pa nman hirap magkamay ng labahin. Ty sa video mo. ♥️😇😊
Thank you for the guidance. I can solve the U12 code problem
I am happy I'm able to help many people
I just fixed mine. Thanks for the tutorial! 👏👏👏
Glad it helped!
Thank you very much bro I just fixed mine ❤️
I'm glad 😊
Thank you so much for the tutorial....i just fixed mine!!!❤
Very glad I can help
very helpful video. very good making video
Many many thanks
Helpul sir thank you👍🏻
Happy to help
where did the spring go, in the switch connector
I think that spring is for the dooor support. mine don't have one so its not on the video. Once you cleaned the switch, you run the machine even without the spring
I repair my water valve before...hard to put the spring...now mine have U12 issue..so i dicide not to put...i will update after i repair
Sir. Same model. Can reset the PCB or not?.
I have not tried this step
Quite helpful. Thanks for uploading ❤
where to put spring? i have prob with it?
I think that spring is for the dooor support. mine don't have one so its not on the video. Once you cleaned the switch, you run the machine even without the spring
friend...of the H02 code comes out, what is the solution?same washing
Error codes base on google is with regards to motor. I have not done this
Amazing 🎉🎉❤❤❤
Thank you, manage to solve the U12 error
Tnx malaking tulong may ipis pala sa loob
Thank u for your video
My pleasure
Limit switch crak hoja te h ?
Can you write it in English?
where location for its spring?i open but dont know the location
I think it is for cover support. Mine is running without it
Do you find the location of the spring?
I'm going crazy 😂 think the location of the spring
@@mohdmarwannoordin8495sy ada mslh sama mcm mana solution dia?
@@hamdanroslan2601 sy tak letak pon spring dia. Spring tu utk safety cover penutup mesin basuh saja
Thank you sir very good work
You're welcome :)
Thanks for your guidance
Hello, we have same model do u know why my unit got slow water refill it takes hours because the inlets system i guess it broken.and it shows u 14
Hello, it could be due to faulty valve. You can refer to this video
ruclips.net/video/HlB_GuDcJR4/видео.html
Useful vedio thanks
Superb explain 👌
try it..but when start,theres a burnt smell and the power supply got shut down...help mé
After you clean the metal plates, you must make sure that the metal plates touching together when switched
Sir saan lugar ba kyo may ipa service sana ako
Di po ako nagseservice sir
hi, how to install the spring (lever) ?
hi, sorry I dont have any spring installed on my machine. but i think its link to the door and can run safely without it
The safety switch was broken.What i need to do?
You can try search it online. Lazada, shopee. aliexpress. Connecting the switch wire directly also cqn make it run but there are safety risk as it will not stop once open or unbalance
Sir ok lang b kahit natagal yan mahabang puti n yan n mqy spring
Ang alam ko po is yan din lever na yan ang magti trigger ng stop or slow kapag di balanse ang labada. So kung wala yan baka magwala washing machine nyo kapag ngspin
@@pinoydiyguy sir non nag DiY po ako bigla po siya natangal pero nalagay ko din nman po siya kso non try ko siya mag spin nag eror po siya lumabas po yun U 12 po
Lods kapag nabali yang balance sensor yang mahabang puti ok lang ba yun kahit hayaan lang? salamat
Aandar naman po kaso kapag nag wiggle ang labada malamng di huminto waahing machine at matuluyan ng sira
Thank you ❤
Good day boss ask lang po ano po kaya ang sira pag maingay yung wash pag pabalik ang ikot parang nag gagrind. Salamat po.
Taob nyo po and ikutin nyo manually (unplug power first). Baka may kumakaskas
Thank you for sharing
hai.. where i can buy this sensor?
I was able to find it in aliexpress, also in lazada. Looks similar
What is the part called?
Not sure about the cover sensor exact name. You can check your existing part, there should be product code on its body which you can use to search the item
kung maputol ba posibleng U12 din ang maglabas na indicator?
Kung maputol po ang wire U12 alarm din po yun.
@@pinoydiyguy sir yung plastick po na parang gansa.
Kapag naputol yung plastic na lever hindi po mag cause ng u12 alarm. Di rin po sya magaalarm kahit bukas ang cover. Kailangan kasi matrigger ang lever para mag alarm
@@pinoydiyguy sir ano po purpose ng lever na yun? Anong function niya sa machine
Yung short lever para sa cover. Yung long lever, sa tingin ko is para madetect at mahinto agad ang machine kapag ngwobble ng sobra ang tub or nawalan ng balance (siguro)
Sir pwede bang palitan na lang yung ganyan? Pag check ko ng amin, putol pala yung dulo.
Opo Pwede naman po palitan yun. May nabibili naman po
Thank you. 👍🏻👍🏻👍🏻👍🏻👍🏻⭐️⭐️⭐️⭐️⭐️
We have the same model the power button broke and start button
I think you can buy the push button in online app like lazada. The problem is you have to check the type of button and you need someone who can solder it. Just send it out for repair is easier
Thank you alam ko na ang gagawin ko
GOOD SUNDAY MERON PO B KYONG HOME SERVICE NG WASHING MACHINE. IAM FROM PASIG
Ay wala po. Sharing my work lng po thru video
hindi po ba pwede lagyan wd40 yan socket
Linisin lang po ok na
How about the big spring in the right ,
Not sure about the spring. Maybe for door opening support
Hello ask lng po kc same tayo ng washing kaya lng ang problema h01 po nmn yong nalabas paano po ang gagawin pag ganun? Thank you in advance.
Sa pressure sensor poyata nanggagaling yung alarm na yan
Idol ano kya sira ganyan ung washing machine ko H 01 ang ang lumalabas sa disply
Yung po water or pressure sensor po siguro. Baka po corroded ang terminal or faulty na sensor
Sir yubg spin dryer nagana.pero ung wash ayaw na.unang lumabas letter u.the next day ayaw n tlga mg wash spin dry lng.ano kya problem?thanks
Pano pong hindi nagana yung wash? Naglalagay naman po ng tubig?
Sir sa same washing machine, Na encounter nyo naba yung umiikot ng tama pero may tunog na parang may sumasabit?
Check nyo po belt ng motor or mismong assembly sa ilalim baka may lumuwag
mine is having this error that shows letter h.please help me how to fix this.
Try draw 1 and 2 with marker pen.
meron pong parang spring na nalaglag nung inopen san po nakalagay un ?
spring po ba? meron nga po daw yun iba. pero saken wala naman po. baka support po ng cover yun.
@@pinoydiyguy sir meron pong spring. pag open ko po nakapatung jan sa safety switch open. saan galing yun?
Sakali meron fix for U11?
wala po video eh. nakakapagdrain naman po ba washing machine nyo ng maayos?
@@pinoydiyguy yes po
Ok din un pump and drain pramg walang bara. Dryer lng tlga ayaw nag U11 po
@@mex7037 sa bandang 5:00 po ng video may pinakita ko parts ng washing machine.yun pong water level sensor nyo malamang is faulty.check nyo kung may choke ba or palaging nakatrigger. di ko pa po natry to pero yun lang nakikita ko related sa alarm na yan.
@@pinoydiyguy maraming salamat sakali anong serial number ng water sensor?
@@mex7037 hindi ko po alam. kailangan nyo po icheck sa machine nyo.
Where can i get the Sparepart .. i am looking for the control cables
I am not sure where to find the exact cable you need. you can try on aliexpress
Hello po. Pano po kaya kapag hindi na level yung spinner nya. May naputol po kaya sa ilalim nun? Salamat po in advance. :)
Yung mismong tub po ba? Nakahang po yun sa body, dismantle nyo yung top gaya ng ginawa ko sa video para makita kung my bumigay na support.
Sir gnyn din po problema ng skin, nagseservice k po b
Hindi po ako nagseservice. Share ko lang po para makatulong
Thank you such a big help
Ganyan yung washing namin at ganyan din ang error. San kaya pwede magpagawa?
Kung under warranty, sa binilan nyo pwede paasikaso repair. Madali lang naman sya diy
@@pinoydiyguy Hindi na po sya under warranty sir, may maisuggest po ba kayong technician or shop sa Manila?
Wala po ako alam. Search nyo po sa google maps yung ibang technicians are using google maps na para makita sila
Sir nalinis ko na yung door switch nya pero ayaw padin hindi kaya sa board na mismo
Na verify nyo po ba na nagdidikit yung dalwang metal plate sa loob? Parang switch lang din po ng ilaw yun principle non. Linisin nyo din po wire connection
Sir tanong ko lng po, nalinis ko na po ung door sensor switch. May u12 error parin po sya. May spring po ksi sya na nalaglag nung binuksan ko ung cover. Saan po kya nkalagay yon.
Make sure lang po nagkakadikit yung 2 metal plate ng door sensor. Kapag ayaw pa din. Pwede rin po try pagconnect directly yung wires ng sensor kapag nag ok, check nyo ulit sensor malamang di nagdidikit yung contacts. Sa spring naman kahit po wala na non. Alam ko kasi support ng door yun.
I broke my switch when i try to change the water inlet valve 😂
Sorry to hear that
where i need to put the spring
Its for the door. But without it also ok
sir paano tanggalin ung child lock
Press and hold lang po yung program button ng 5secs or more
perfect
How to return the spring of top cover
Pano po pag 2 H ang nagpapkita
panasonic din po ba and same model?
Sy da tukar sensor tapi tak jadi jugak . Any suggestions for me😅
Maybe the sensor is already triggered or activated
What is the product name?
Safety door switch
sir ginawa ko na yan pero u12 error parin
Naconfirm nyo ba lods ang contacts ng switch kung nago on/off?
Sinu marunong mag repair ng u12 error po dito sa q.c
Paservice nyo nlng po sa panasonic service center mas ok
san ba nakakabili ng ganyan ung cover sensor yung buo
Sa lazada may nakita ko kaparehas search nyo lang door switch ng panasonic washing machine
sori
พานาโซนิคยังไม่ทันได้ซักก็ปล่อยน้ำทิ้งออกมาหมดแล้วอ่ะครับ
sorry I don't understand even after translation
Pede mo ba maayos ang samin hehehe
Pasensya na po Hindi po ko kasi nagseservice
Sebab patah
Napaka halata masyado baguhan kapa sa mga ganyan tapos nag vvideo kapa
Sino ba nagsabi sayo lagi ko ginagawa yan? Kung may nahalata ka, e di wow. Magaling ka siguro, araw araw ka siguro nagkakalas nyan. Sa yabang mong yan may naitulong ka ba? Ako sigurado may natulungan ako sa video na ito. Salamat sa panonood.