The MUST HAVE MOD for your C250 Mercedes Benz W204 C-Class!!!
HTML-код
- Опубликовано: 19 дек 2021
- So for this Mod, you'll need the BMS C250 Intake that you can buy in the link below (Note: It's actually $130, not $100 my bad), a few tools, and some elbow grease.
The reason why this is the must have mod is because it adds smiles per gallon but more importantly, it seems to have eliminated a lot of the turbo lag time. Ultimately, you be the judge if it seems to work on your car too. Thanks for watching!
burgertuning.com/products/bms... Авто/Мото
I had the same exact car & it was SURPRISINGLY quick stock for being just a little boosted 4 cylinder 🔥
I think the power dropped because it's breathing hot air. The filter must be separated from the engine and covered so that it receives cold air
Thank you for this video no one talks about it
Great video!
Thanks brotha!!!
A lot of enthusiasts dont recommend this at all. Too close to the engine so it's just sucking in hot hair. The oem filter has a better cold air intake
That's true but the sound of the blow off is worth it to me hahahah. You barely feel any power loss and you have more smiles per gallon. I may be switching to another better intake soon though.
@@RichardCuico Get a muffler delete for the turbo to hear it louder and a go fast bits blow off valve and it will sound way louder and you won’t need that intake. That way u can have cooler air. And also those two things cost $400
Facts I took mine out, 3 things went wrong when I put my cold air intakes in
Take the heat blanket from the hood, you'll hear it way more from inside the car and outside 👌
did you buy those red seats online or the dealership because those seat belts only comes on the sport plus model of the C250?
Why you put back the old intake hose? It’s not even taking in air anymore???
Thinking of buying one of these, what’s something I should look out for?
Can you provide the link to the vent, I tried going to auto zone and it didn’t fit 😭😭
Just found out that burger motor sports is in my hometown 👍
Nice ep. Nice car) do you know how much fuel litre per 100 km it uses?
Looks like mines brotha , how’s the air filter doing??? Interested
I had that same car , it's amazing 😍
it's a cool little thing! I'm hoping to make it look, sound, and drive beefy tho!
Had?!
@@RichardCuico yo you and I have the SAME EXACT car to a T 😂 same color, same wheels, same year, same motor, same EVERYTHING! Did you ever have the issue where you would rev the motor or stomp the gas ALMOST to the floor & your CPU would block all the power to the vehicle to the point where you could barely accelerate and only get up to about 50mph until you turn the car off for like 5 minutes and start it again ? It pretty much goes into limp mode to protect the motor for no reason and I have no idea why
@@TH3_D3ADLY_DILF. mine does that only when the car has been started up and not properly warmed up. But as you stated, after turning it off for a few minutes or for the evening the lights gone. I let my lil spaceship warm up for 8-10 mins before I hit the road.
@@princessgonzalez1550 yeah I think I ended up finding out that there was a decal for one of the sensors or something like that and that’s what was causing it, unfortunately I didn’t have the car long enough to go get it fixed 😂 I totaled it doing about 100mph on the highway
No tune to do it? Also any problems?
Nice ! , i had one of those but i went to a autozone and bought a exhaust repair kit which is pretty much a piece of aluminum sheet and i placed it in between the intake and engine to help with the heat soak and it helped alot !
Oh serious? I'll definitely look into that so that cold air is the only thing passing through. Thanks man!
@@RichardCuico cat delete 😳
@@noeltejeda1567 was thinking about it but I'm on the fence since this thing will be my daily. I want to though hahahaha
i got the pre facelift 2011 C250.. I like it..
Ya the pre face lift still looks great!
What a hatchet job! Now the motor is sucking in HOT air & it looks really crappy with half the original air box missing. Why? Why? Why?
Wont the intake grab more hot air from the engine bay, since the air filter is out in the open and not covered? I understand its still getting most of the air from the front, but seems like the stock setup was better for cold air than this. Thoughts? Edit: nevermind you end up speaking about it near the end of the video lol
Stock is definitely better
Agreed it will work if you make a custom box and piping somewhere under grille
Yes. Yes it will.
Yes tornado tuning has a better box made out of carbon fiber
Yes tornado tuning has a better box made out of carbon fiber
I'd suggest get a turbo muffler delete easy install and defo helps with the turbo lag.
I have the part but havent had time to come through and install it. It's coming soon tho!
Bro u way over paid for this intake. I’m very familiar with BMs and they are good but u could’ve just got yourself a eBay or Amazon filter for way less and it would’ve done the same. Also suggest to reroute it towards the from. Which is possible. But if u want to get rid of the lag get an intercooler a blow off valve an ecu tune a tcu tune and an exhaust setup. You’ll feel the difference. Big difference. Even with a pedal comander and that’ll help out too. I love the w204 models. I’ve had a c300 for years and it’s fully modded. Trust me dude. U do those things I mentioned and you will feel the difference
Ebay filter?? 🤣🤣🤣
No way!! I never cheap out on filters
@@extremedrivrit’s the same damn thing bro calm down 😂
@@24_eddiemar_
No it isn't the same quality.
I know the difference because I have never used any air filter But K&N. Just saying.
get a tune... me ECU is going to confuse the timing. due to extra hot air. also put back the air box cover. you can make it fit. more hot air is going in the engine. you kind of lost like 4HP but 1 or 2HP by repairing intake from intercooler.
you can use open box on cold days. but hot and dusty. Your ECU vents will clog and have warm hot temps. MB put the ECU there because it was getting too warm in it previous locations. A Mercedes Benz is basically a over engineered Honda.
awesome keep content coming. beautiful ride. Mercedes oil and Motul only for fluids. great vlog guy.
Is a BMW an over engineered Honda as well. I had some issues with my Booster Vacuum pump and luckily I replaced it and my Mercedes runs like a champ.
I have the same car and tbh this is the worst mod for the car because it is soaking up hot hair and not “cold air” in my opinion I would go with an intake from a company called modalworks but if it’s to pricey I would recommend go with a company called tornado tuning which is like this intake but it comes with a heat shield hope this helps and keep up the good work.
I concur
Good advice, thanks.
Turbo lag?
Whats the front lip???
Dam bru what’s the body kit
bro you cant leave just opened air filter, it sucks hot air and you peak power is reduced (believe me, go dyno and u will see like -5 hp lost ;) ), but glad to hear it increase your throttle response.
What’s the color name?
2012 c300 ??
Petrol?
Sheeesh wish it was a coupe
What’s the name of the shop you were working at?
The shop is called GarageHorch! I don't work there but the guys there are all good friends of mine. If you ever stop by, let them know you saw us on youtube and they'll take care of ya!
The car has a lag cause the turbo on those cars are made so cheap. Buy the OEM Mahale turbo and u will love it. It’s like $1300
First of all, you just made it a hot air intake. And secondly, the mechanic I have for my car told me to NEVER use the K&N filters on Mercedes as the oil that comes in from the filter may contaminate the MAF or O2 sensors. K&N says this is a myth, but I've seen it first hand. They over oil these filters from factory and they do not stop as much dirt as other filters. I stopped using K&N years ago.
Your loss!!
I've never ever had any issue with K&N Air Filters ever. Over 20 years of KN filter usage and no issues ever.
Iv got a w204 coupe will 20” alloys fit ok ??
The ride will be shit
Have u faced any problems after instaling it?
I have this on my car I have no issues sounds amazing and I have had it for 5 months
0 issues so far and I doubt it would cause any. There’s nothing that can really break unless you installed it incorrectly
@@RichardCuico thanks man I'll install it too
@@shotexaaa2789 awesome bro! Let me know how you like it
Is it fit for c200 w204 2011 ?
Not too sure to be honest, if the intake looks the same, it should fit
Bro I have a c180 w204 can I make it loud??
if im not wrong, they have the same 1.8L engine so you probably can
@@kronos1850 no its has a 1,6L but with the turbo it makes it a 1,8L
Use octane 94 not regular sir 🙀😵💫😹🙈😵
i have 2013 c300 ........ rotted rusted rear subframe...suspension arm detached due to the rot.. unsafe to drive
I believe Mercedes has a lifetime warranty for that issue on the w204s
Links to the grill
Coming soon!
are these cars reliable?
yes
How many views for you to put the wrench permanently?
Are you asking him to install the wrench into the motor permanently? Please clarify your statement.
1:57 why you keep turn to start on ? It's not mechanical..It's a button
I don’t think everyone has the push start button. Or maybe he misplaced it. I love mine on my car.
@@christopherybarra1070 I mean, that key mechanism isn't mechanical...no need to crank the key until the car starts
Have you owned this car? I do and I have the push start button. You can also start the car by using the key. If you turn the key and release it before the car has started it will not start, hence why he turned the key until the car had turned on. You can “tap” the key so the motor cranks if you wanted to work on the timing belt or if you wanted to check the pressure in a cylinder. I appreciate your comment though.
@@christopherybarra1070 I mean, you don't have to hold the key in the end position until the car starts, just turn it and let go.
You got it, I think I am used to my push start on my car. Whenever I drive a car that you need to insure ant turn the keys to start, I usually forget and leave the keys in my pocket.
And now you have hoy air into a turbocharged engine (less power) and you will loose the air positive pressure at high speed from the original air intake.......maybe good sound, but less power.
That’s a naff looking engine bay.
Why did you delete my post bro?
What was your old post? It might have been classified as spam by youtube
Oh ok that’s fine I had a list of mods you should look into it’s cool thanks for the reply
@@jerebear117 oh send it my way! Would love more ideas
What’s your DM ?
@@jerebear117 here’s fine but my ig is @richardcuico
This the 2.1L diesel mate?
1.8L gas
EEEmola red lmao
No merc owner should be complimenting a beamer weiner
Butchers…..