Hexagon Bolts Tips and Tutorials for Easy Making Cold Forging Bolts Former Machine
HTML-код
- Опубликовано: 20 авг 2021
- Hi, Friends Welcome to MIT Bolts
In this video, I will show you how I made the Puncher from Hexagon Bolts. I always use SPRING Pin Pusher for better performance of Clips ( Finger Holder ).
Try this SPRING method and tell me it works for you.
Any questions
Contact me ( EMAIL ) - jolin1461@gmail.com
or Comments Down Below
Please Subscribe
Don't Forget to LIKE
Thank you so much for watching
#Bolts
#Machine
#Tutorials 
Наука
One of the best videos regarding bolts.Good job my friend and thanks for sharing.
Educational video for Bolts Making Industry. 💖👦👍
Also Support my GrandSon RUclips Channel.
* Ethan Toys218 *
THANKS FRIEND..😘👦🎈
Si señor así se prepara una extrusión para que no tenga peligro en el céntrate de la buterola al entrar en la matriz de reducción forzada así me enseñaron montar con muelle para facilitar la entrada en matriz y este sujeto para no pillar las pinzas te habla un compañero desde barcelona
great job. I want hex head bolt video.
Very Useful Video 👍👍
Super V good 👍👍
Very very good young man
Nice ❤❤❤
Well done
Very good👍👍👍👍👍
Muito bom, faz um vídeo de peças recortadas se possível .
Thank you so much for Watching & Wonderful Comments to video's my Friend .
Thanks for sharing! Excuse me, is this CHUN ZU CBF-84S?
very nice.
Good Day my Friend,
Thanks for watching.
Very good video. Are you using PKO in any station ?
Hi Friend,
Yes , always use PKO
Thanks for watching and Wonderful Comments.
@@mitbolts I mean to say PKO with punch springs only or with PKO shaft ?
Hi, I just need details of the punch and materials used, their harness level and their hardening method. Could you please share us it will be very helpful for us. We are struggling in cold pressing of wheel balance weight manufacturing.
This is machine like chunzu machine.
Your right , this is #Chun Zu Bolt & Nuts Former Machine Taiwan.
SHOUT OUT to CHUN ZU TAIWAN , Ba Ka NAMAN ...
What is the angle of 3rd mould can you suggest
Sir,
When you forged in 4th mold nurling of 4th bold nib must be sparp or what.?
Its always on the video, Just keep watching my TUTORIALS.
Thanks for your SUPPORT
MIT Bolts
Why are you not using oil? Does it stop the shoulder from filling out?
Yes it does
hello, what is the feature of the raw material you use? is it annealed material?
Hi, Friend.
Steel Wire ( 435 )
Thanks for watching .
Always u need to use 2A wire for any socket items, then only ur hex punch will get good life..
I used Hex Puncher Pin for almost 100K pcs. and its not yet break, for safety of my Molds I only use it up to 70K...Thanks for your suggestion, but we only do what the Costumer Order Wire.
I really appreciate your comments and Help to other Bolt Former Machine Workers .
@@mitbolts material (435) and draw size
Please national machine 8l4 video
I think it's possible only 3 station only
Which die you think skip from 4 of this?
Hex head bolt ki tooling bathana
What is the diameter of the material, how many diameters does it drop in 1 station?
Hi, Friend. Wait for my video about this...
Thank you so much for watching and Supporting my RUclips Channel.
Wt type nut bolt machine plz send me details
Hi, Friend
Chun Zu Machinery Industry Co., Ltd ( Taiwan )
Thanks for watching and Supporting my RUclips Channel.
How many difference between third no head size and fourth no head size please explain me in detail
Hi, Friend
It depend on the specific size and deep of the Hexagon Pin. You have to remember in must be in Cone Shape form. Tips, *Mold#3* - Start in Small and just make it bigger if not enough to form the Head ( this technic prevent Hexagon Pin being Broken ) Hope this could help.
I will make another video about this kinds of bolts, Please just wait.
Take care, and Stay Healthy.
@@mitbolts thanks sir
Cut off kaise nikalenge
Cut off nikalne ka formula
Hi friend material (435) and draw size
എനിക്ക് ഇതുപോലുള്ള ഒരു കമ്പനി തുടങ്ങാൻ താല്പര്യം ഉണ്ട്