I always forget about ZT's and every time I see one again I remember how amazing they are. Wish I could legally carry spring assists in my state. Would like to get some of those.
that zt fixed blade really caught my eye im trying to differentiate the zt 562 and the the 566 i know the tech specs(titanium vs steel, ect) are different but it dosnt seem much else is
Would of been nice if the camera was higher above the knives to see more of a top view than a side view. Either was good video. I want that 0562 and the emerson design
I know why they call them Zero Tolerance now...yea, my wife has ZERO TOLORANCE for me to buy another knife you guys make, but I really like those ZT's....
Some retailer will make a limited edition 0562CFBK with a black blade... and then I will buy it. Hopefully that retailer is BladeHQ!!! HINT HINT HINT. I got the dough guys!
I love my ZT's and the 566 is my most recent. The only negative in my mind is the tapered spines of the blades. A lot of us use Wicked Edge or other similar clamping sharpeners and the beveled/ tapered blade spines make it harder to secure in the clamps. I see no value in tapering the spine of the blades other than you are trying to reduce weight, which in this case would be negligible. Please refrain from this "design feature" in the future. Especially on the folders, you don't need a distal taper on a folder for god's sake.
Everything looks really exciting except for the fixed blade. It looks great but its too small for what I want. I´d really like to see the same knife but with a longer blade. At least 5.5 inch.
ZT562-Looks nice but no 4 position clip = fail. Also, people complained about thumb studs being hard to use so you do away with them? WTF? 0620-very cool, but again. Only a 2-way pocket clip. That's a no-no.
Unbelievable that even the new Hinderer collaborations do NOT have a four-way-swappable pocket-clip! All the awesome collabs of the last years suddenly came strictly tip-up, while ZT always was famous for their four-way-swappable pocket-clip, like HInderer. Fuck this shit! It's frustrating to see that again putting some extra mounting holes is too much to ask
I noticed of course. Then don't design such a clip is my simple answer. It's Hinderer-unworthy in my humble opinion. And fucking annoying for me, since I can only carry tip-down unfortunately :( I am used to missing out on awesome production knives and collabs because I know I am one of the few who can't stand tip-up carry. But as even my favorite four-way-swappable pocket-clipped production knife company starts doing all these awesome collabs (Rexford, RJ Martin, etc.) without a four-way-swappable pocket-clip, then I get pissed, annoyed and jealous and cannot be a fan anymore.
Just because I can't. No legal issue. Believe you me, I've tried it! Waste of money. So on some moment I stopped wasting money on awesome knives I can't/won't carry.
the guy with zero tolerance really needs to learn how to show the knife to the camera better. or the camera man needs to change the angle at which he's holding the camera.
Kershaw and ZT's new offerings look awesome!
ZT killing it again!
I love that Rick is just chillin in the back ground hahaha. great video guys thank you.
I always forget about ZT's and every time I see one again I remember how amazing they are. Wish I could legally carry spring assists in my state. Would like to get some of those.
The camera angle is killing me! We need the presentation side of blades!! :)
That new fixed blade looks awesome.
Rick just hanging out in the background. Then just bringing him in for a cameo, awesome!
Really liking the 0562CF
Just awesome! Love the fact they're using Bohler, love black pocket clips, doesn't catch the eye, or reflect. Very nice. And great job team BladeHQ!
ZT is Killing it! Love all the new designs!
Man these new folders are amazing my favorite is the emerson collaboration.
That 0562CF is simply a must!! Rick Hinderer knocked it out of the park on that one. WOW!!! The 0180 looks cool too!
Thank you ZT!!!
You guys should try raising the camera up a little higher so that we can get more profile views.
dude I'm so pumped that t-hawk is coming with g10 instead of that slippery (albeit pretty) CF. love it.
That ZT 0180 is really nice! Will keep an eye on it.
ahhh finally a zt with a wave. I despise all emersons but I love every single one of my three zts
Really excited for the emerson collaboration!
ZT IS KILLING IT!!!
Definitely picking up a fixed blade when it comes out. Can't wait for future shot vids to be up!
I’m still in love with my zt 0350sw
I can't wait to see this! Thanks for making these awesome videos!
Kershaw keeps impressing. I actually am taking a real good look at that fixed blade.
Love the 0562's. Just wish they would add a forward finger choil version of the zt/hindo collage
7:30 Love it!
wow a company that is actually putting out logical and awesome products for 2014
Really looking forward to that fixed blade and tomahawk!
Great new stuff!
ZT!!! thank you for putting a stainless steel lock bar face!!!
Great Video Team. Looking Good ZT Good Work!
nice job on the stonewash.
There goes my retirement. That Emerson is awesome.
I also wants to go here!
that zt fixed blade really caught my eye
im trying to differentiate the zt 562 and the the 566
i know the tech specs(titanium vs steel, ect) are different but it dosnt seem much else is
love that zt/emerson collab knife
ZT 0620 and 0562 line looks awesome :)
when do they come out!!!!!????
Am I the only one who notices Jeff smith/ cutlerylover in the background at 5:25
Would of been nice if the camera was higher above the knives to see more of a top view than a side view. Either was good video. I want that 0562 and the emerson design
cannot wait... 0562 and 0620 in M390 blade....
Was the Emerson knife chisel grind like his others? I couldn't tell in the video.
It's not chisel. Thank god. You can see the grind on the other side at around 4:05
I hate chisel grind I have o.c.d when it comes to a blade matching on both sides. lol
Same here with regards to matching angles.My 0566 came with 20° and 25° respectively. Disappointed.
2:45 Rick is back there while they're talkin' about his stuff.
Any ETA on the Blur in black wash? Didn't see it up on your site...even as a "coming soon".
Is there a projected release date on these folders?
What is the name of the "made in the USA" sheath that fixed ZT0180 is in? Is it available separate?
I know why they call them Zero Tolerance now...yea, my wife has ZERO TOLORANCE for me to buy another knife you guys make, but I really like those ZT's....
just take my money now!
And Rick Hinderer himself in the back!!!!
The 0620... Want one bad but im assuming its gunna cost a bit. They shouldve put a flipper on it to, lol. 3 way deployment.
Dat slicer...
where is Jen?!?!
Some retailer will make a limited edition 0562CFBK with a black blade... and then I will buy it. Hopefully that retailer is BladeHQ!!! HINT HINT HINT. I got the dough guys!
What happened to the new RJ Martin design you were talking about last year?
It came out already. The 0301. It was a limited run with a stonewash or black blade.
Blade Brotherhood
I read that they wanted to introduce a new RJ Martin design at SHOT 2014. The 0301 looks like an old design.
Where is ZT0777?
0777 is history. Was a LE from the start and the run is over
Prices?
On their website
The top of that axe handle is going 2 fly off when u chop
I love my ZT's and the 566 is my most recent. The only negative in my mind is the tapered spines of the blades. A lot of us use Wicked Edge or other similar clamping sharpeners and the beveled/ tapered blade spines make it harder to secure in the clamps. I see no value in tapering the spine of the blades other than you are trying to reduce weight, which in this case would be negligible. Please refrain from this "design feature" in the future. Especially on the folders, you don't need a distal taper on a folder for god's sake.
0180- damn, what a sexy blade, but the price is a bit too high, IMO
Everything looks really exciting except for the fixed blade. It looks great but its too small for what I want. I´d really like to see the same knife but with a longer blade. At least 5.5 inch.
That carbon fiber hinderer might be interesting. But the other folders not so much because I don't like Elmax. I have been burned too many times
Emerson / zt wowwwwwwww
Who's that guy behind the speaker, could it be Mr. H? his-self...
ZT562-Looks nice but no 4 position clip = fail. Also, people complained about thumb studs being hard to use so you do away with them? WTF?
0620-very cool, but again. Only a 2-way pocket clip. That's a no-no.
His aaahs and aaahms are annoying.
Thanks for the video.
I love ZT's.
Unbelievable that even the new Hinderer collaborations do NOT have a four-way-swappable pocket-clip! All the awesome collabs of the last years suddenly came strictly tip-up, while ZT always was famous for their four-way-swappable pocket-clip, like HInderer. Fuck this shit! It's frustrating to see that again putting some extra mounting holes is too much to ask
It's impossible to make the 0562 tip down due to the clip design. The clip is screwed in between the steel liner and the standoff.
I noticed of course. Then don't design such a clip is my simple answer. It's Hinderer-unworthy in my humble opinion. And fucking annoying for me, since I can only carry tip-down unfortunately :( I am used to missing out on awesome production knives and collabs because I know I am one of the few who can't stand tip-up carry. But as even my favorite four-way-swappable pocket-clipped production knife company starts doing all these awesome collabs (Rexford, RJ Martin, etc.) without a four-way-swappable pocket-clip, then I get pissed, annoyed and jealous and cannot be a fan anymore.
And why can't you carry tip up? Is it a legal issue? Because I also prefer tip down, but that won't stop me from buying one of these.
Just because I can't. No legal issue. Believe you me, I've tried it! Waste of money. So on some moment I stopped wasting money on awesome knives I can't/won't carry.
My dad is there
Of course.......ELMAX
be nice to actually see the blade profile ???
awsome looking knives, but at 300+ dollars way to expensive for my taste!
0562 CF wery sweet... but with ZTs aproch to uppgraded knives. God Luck finding them... if they do at all.. :( Sweet knife thogh...
the guy with zero tolerance really needs to learn how to show the knife to the camera better. or the camera man needs to change the angle at which he's holding the camera.
Bad angles. Can't see the knives in full view.
Sweet Knives he is coughing up.
Dude needs to take a Cough Drop.
Stealing the show,,,, Kershaw ZT!!
Sahrawi histoire 1976 Le Sahara occidental capital de le monde car le dernier gouvernement du mahdi lmontader c'est logique pour information
No imagination. They all look the same... Disappointing.