Great mod and content like always guys. Some of my other friends have done this mod as well, with good results. I do remember them using a wet dry vacuum during the hole cutting inside the hull to suck the fiberglass dust during the hole cutting installation. Drop cloth looked to work okay as well. Great job guys thanks for sharing. Billy D
Hey guys, just ordered one. Im curious if you noticed any extra water inside the hull? Im suprised Kspeed doesnt tell us to seal the raw fiberglass with hardener or gelcoat or something? Any input?
Joeys, great question. no extra water at all. i mean, if you completely submerge your ski up to the handlebars, maybe but doubtful. the cool air panel i have been told can allow some water to come down but i haven't had that problem yet. anyway, no extra water from the 5th hole air intake.
@@TheAdventureState cool! Yea i actually have always taken that panel out on my ultras, and just ran nothing there. Not sure when Kspeed started selling the filter panel but it definitetly sounds good with no panel. Much better sense of speed. I hope the filter panel doesnt block sound!
@@joeysprojects9081 i haven't thought about taking the panel out. i may do that to compare the sound. the trumpet is an amazing sound and i love it! i am thinking of some kind of exhaust primarily for the loud obnoxious noise lol.
Great question, steven! It actually just sits/hangs there. Surprisingly its not in the way and being that steel hose, it doesnt flop all over the place.
Holes in his fiberglass hull wont have any influence on the strength and characteristics of the durability of his pwc hull? I heavyly doubt it. Especially such a huge hole in the front part.
The location of the 5th hole actually looks like the factory was going to add an intake vent there- it has absolutely no negative effect on the strength or durability or the hull or deck. The duct is also concealed under the side fairing
Is this mod possible to do on the Ultra LX? Or is the empty space where the hole is drilled on the 310 taken up by the flush port on the non-supercharged models?
Cody, it wouldnt work for the ultra lx as its a super charger pulley and the Ultra lx doesnt have a super charger. Sorry man. But if you hit up kspeed, they do have a ton of mods for that one.
@@codyfrierson6071 hahahahaha dude im so sorry!!!! I thought this was on the super charger pulley video. Sorry man. Yes, this can be done on your ski and will be a good mod as its bringing in quite a bit more fresh air into the engine bay. Hit up kspeed and tell them you watched this vid. They will take care of uou
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
I think I need one of these for my 2021 Ultra LX
Jd yes you do!!!
Probably would help some!
Great mod and content like always guys. Some of my other friends have done this mod as well, with good results. I do remember them using a wet dry vacuum during the hole cutting inside the hull to suck the fiberglass dust during the hole cutting installation. Drop cloth looked to work okay as well. Great job guys thanks for sharing.
Billy D
@@LifeBeginsOnTheWater thanks! Yeah the vac is a great idea. Looking after the cut, i think the cloth grabbed it all.
Awesome , love the content!!
Thanks addict!
Hey guys, just ordered one. Im curious if you noticed any extra water inside the hull? Im suprised Kspeed doesnt tell us to seal the raw fiberglass with hardener or gelcoat or something? Any input?
Joeys, great question. no extra water at all. i mean, if you completely submerge your ski up to the handlebars, maybe but doubtful. the cool air panel i have been told can allow some water to come down but i haven't had that problem yet. anyway, no extra water from the 5th hole air intake.
@@TheAdventureState cool! Yea i actually have always taken that panel out on my ultras, and just ran nothing there. Not sure when Kspeed started selling the filter panel but it definitetly sounds good with no panel. Much better sense of speed. I hope the filter panel doesnt block sound!
@@joeysprojects9081 i haven't thought about taking the panel out. i may do that to compare the sound. the trumpet is an amazing sound and i love it! i am thinking of some kind of exhaust primarily for the loud obnoxious noise lol.
Where does the rest of that hose go? Does it need to be zip tied out of the way, or routed somewhere inside the engine compartment? Thanks
Great question, steven! It actually just sits/hangs there. Surprisingly its not in the way and being that steel hose, it doesnt flop all over the place.
Holes in his fiberglass hull wont have any influence on the strength and characteristics of the durability of his pwc hull? I heavyly doubt it. Especially such a huge hole in the front part.
The location of the 5th hole actually looks like the factory was going to add an intake vent there- it has absolutely no negative effect on the strength or durability or the hull or deck. The duct is also concealed under the side fairing
Imx nah it wouldnt have any influence at all
Jd agreed
Is this mod possible to do on the Ultra LX? Or is the empty space where the hole is drilled on the 310 taken up by the flush port on the non-supercharged models?
Cody, it wouldnt work for the ultra lx as its a super charger pulley and the Ultra lx doesnt have a super charger. Sorry man. But if you hit up kspeed, they do have a ton of mods for that one.
@@TheAdventureState thanks for the response, but what does a supercharger pulley have to do with modifying an extra intake hole? 😅
@@codyfrierson6071 hahahahaha dude im so sorry!!!! I thought this was on the super charger pulley video. Sorry man. Yes, this can be done on your ski and will be a good mod as its bringing in quite a bit more fresh air into the engine bay. Hit up kspeed and tell them you watched this vid. They will take care of uou
@@TheAdventureState I figured that’s what was happening. Lol. No worries. I appreciate it!