Drill Companies Keep This Secret From You! Don't Throw Away Broken Drill Bits Anymore
HTML-код
- Опубликовано: 4 окт 2022
- Drill bits become damaged and break over time. Many people reuse the damaged and dull drill bits on purpose, but everyone throws the broken drill bits away. However, the broken bits can be reused and evaluated. That's why in this video we showed you what you can do with your broken drill bits. After watching this video, you will not throw away your broken drill bits and reuse them.
- Хобби
Most drill bit companies leave the shanks somewhat soft only hardening the drill part. they do this so the chuck will grab better. For best life punches and chisels made from shanks should be hardened. As a gunsmith I never throw away old drill bits. I've made countless assemble pins and firing pins from them.
So the "secret" drill companies have been keeping from us for millenia is that you can sharpen the drill bit to be a chisel? Wow this changes everything, I will never look at life the same way. I'm born again thank you
Самое лучшее применение сломанного сверла, это его снова заточить и использовать по назначению. Остальное то такое себе. ЗАбавки ....
If you're breaking that many bits, you need to improve your drilling technique.
that drill bit center punch is just perfect for hurting your fingers , when you hit them between the hammer and bit !
1. Совет, использовать сломанное сверло как гвоздь или шуруп чтоб вешать на них инструменты. Фэйл. Хрупкие сверла не самый лучший выбор.
2.Совет. Стамеска из хвостовика сверла. Тоже фэйл. Хвостовик делается из мягкой, не легированной стали низкого качества, для стамески не подходящий.
и придерживать заготовку под ручку, через пилу, тоже не очень умно))
Хвостовик скорее всего и из той же стали если сверло не гиганское, другое дело что он не закален. Получится мягкая стамеска которую легко сломать у ручки.
Для стамески лучше перетачивать режущую часть сверла. В идеале нагреть горелкой до красна, раскрутить в пластину и проковать/выровнять. Придать форму, закалить режущую часть и заточить.
В этом варианте будет отличная стамеска.👍
Для повешать инструмент - выдержит. Нагрузки нет. Другое дело, что неэффективно - нет шляпки/зацепа - будет падать в самый неподходящий момент.
Для этого всё же лучше по старинке - гвозди или шурупы/саморезы.
Worn out or broken bits also make a good scour for cleaning out drill holes in masonry.
I just re-sharpen them on the bench grinder. Dress the wheel first and adjust the tool rest if necessary.
As the drill bit gets shorter the web gets thicker.
Amazing grinding my man
a broken drill can simply be re-sharpened.
1:18un maestro jamás debe
trabajar así 😮
Apparently they kept the secret of don't overload the drill also!!!
Why is resharpening the drill the *last* thing you showed?? It's the first thing I thought to do with a broken drill bit
My next project is to break my drill bits, so I can make wonderful things with them
Wonder what tool does he ruin to make his paint roller?
Nice video, thanks :)
Love it ❤️❤️❤️❤️❤️
Cool as always :)
Très bon boulot de récup J'adore Merci
Great👍👍👍
I’ve been resurfacing my drill bit’s for as long as I’ve been able to hold a drill .
Very into innovative!
I strongly advice everybody to use the guard on the angle grinder !
You sir are a bloody genius! I loved this video & could cry about the number of bits I have wasted. Please keep up the amazing work
For the bigger drills, drill bit companies friction weld a shank onto the drill blank so using that end for a chisel seems to be a moot point as it will not be the same grade tool steel as the blank.
Of course the drill companies have no interest in these "secrets" as suggested in this video and if anything they would advise to get the right tool for the right job and not cut corners for safety reasons.
I was always taught to never use the side of a grinding wheel
Yet we all do. Like never use a knife to cut towards yourself. We all do that too. Rules are meant to be broken, when it fits..
It isn't his grinding wheel.
That's another secret that the grinding wheel companies are keeping from you!
And you were possibly also taught one should never eat peas off a knife nor run with scissors.
It is to be hoped that as we age we gain experience (and intelligence) sufficient to enable us to determine when and how 'rules' can (and should) be ignored.
Unless they're prepared to blindly follow dictators, for ANY and EVERY 'rule' intelligent adults should / must always ask and investigate 'why' / 'why not'. What will happen if I ignore this 'rule'?
Why is this 'rule' necessary?
What 'value' does this 'rule' afford?
Is this a 'rule' or simply a 'general recommendation'?
Intelligent adults need to follow the example of innocent children.
When told 'you must do this' or 'you must not do this' - ask WHY?
If one doesn't ask why one will never understand whether the 'rule' has value or requires amendment / abolishment - eg a 'rule' establishing a 'right to bear arms' written in a time of turmoil and single shot muzzle-loading smooth-bore muskets.
@@slowdancer5563 hahaahhaahh
If you heat a drill to the point it changes color at all it becomes super brittle and will break like glass., is why when you sharpen them you have to go easy because itll just break first cut.. and id be worried about using any of them as hammers or punches because my eyes tend to attract flying metal shards. Even with glasses on somehow i always manage to get a piece in my eyes..
Maybe there's a magnet in your brain? I think you should go and see a doctor. 😂
My favorite part is always the 👍🏻
That you could just resharpen a broken Drill is no secret.
Most bits commonly sold have an off center point that only becomes apparent when used on precision machine tools.
Tuyệt vời ý tưởng hữu ích
Drill companies what? 👍👍
😂😂😂😂😂
Use drill bit as chisel doesn't even to cut the blade. Just simply sharpen the backside. Just like tip no 1.
Wow yo estaría preocupado si fuera este señor. Con la información que develó las empresas de perforación lo deben estar buscando 😲💣⚰️
👌👌👌
SEI VERAMENTE BRAVO, SE IO FOSSI BRAVO COME TE MIA MOGLIE MI FAREBBE UN MONUMENTO.
Muito legal mesmo.
Interesting, per usual. Bigger 'secret': if they're of any decent quality = lifetime warranty replacement, which next to nobody calls/emails to utilize!! 🙃
شكرا لك.
3.Совет. Сваривать электродуговой сваркой высоколегированную сталь сверла недопустимо. Сварочный шов лопнет.
4. Совет. Нормально. Кернер из сверел- нормальная штука.
5. Совет. Переточить сломанное сверло это даже не совет, а то до чего любой здравомыслящий человек додумается без всяких видео на Ютубе.
The C(H)isel idea is very Good!
What’s a Cisel?
@@nealethake6934 (H) Better Now?
@@ioanstef1983 👍 better
@@ioanstef1983
"Better now?"
Not really.
The brackets - () - suggest the (upper case) 'h' is optional.
It's not.
Apparently what they kept secret is how to sharpen a broken drill !
You could probably make flat-bottom drill bits out of the broken ones, for those odd occasions when you need to drill a flat-bottom hole.
perfektné. Lenn škoda že neviem pracovať so zváračkou
Просмотрев видео, хочу теперь узнать, что же буровые компании держат от нас в секрете?!
So what's exactly is the secret they kept?
They can be re-sharpened into a drill bit. Instead of the rest of that nonsense.
Bugger , the secret is out now!
대단해요
Let's do this
Don't use the side of your grinding wheel to grind anything. Grinding wheels can, and do grenade.
A pair of balls, leather gloves, and a good face shield. Let's rock!
Oh well maybe I should stop too
@@thaddeustroyer You should. I have used the side of a grinding wheel. I'm very careful. It's not recommended, it can be dangerous, and shouldn't be encouraged for amateurs. Grinding non ferrous metals on a wheel designed for ferrous metals can be dangerous as well. Non ferrous metals can clog and be impacted into the wheel causing it to grenade.
OMG, Don't fret about using the side of a grinding wheel. Sharpening a drill bit isn't going to make it "grenade".
@Robert Johns
You must work with extremely poor quality grinders.
isso tudo para reaproveitar uma broca quebrada, kkkk .
As 'cute' as this video is, why would anyone use a 'broken' drill bit for any of these purposes when they could simply put a new point on it?
To make videos such as this.
Колхоз дело добровольное )))
Браво буровым компаниям👏👏👏👏
Не зря буровые компании это держат в секрете чтобы нормальные люди херней не занимались
Why do you stop /cut the video to doctor the outcome?
А буровые компании здесь каким боком?
excellentes idées. Super. Bravo.
👍
Дякую.
heres a secret that not many know
dont
ever throw away the guard off the grinder .... you dont seem to know this secret.
De titel is niet lasterlijk "Het boorbedrijf houdt dit voor u achter!"
Schärf die abgebrochenen Bohrer wenn es geht neu oder werf die weg wenn es nicht geht..
Big drill bits never snap.
При чем тут буровые компании???
Ненавижу дискрейлы!
И что скрывают буровые компании?!⁉️
И всё? Интересное и полезное так и не началось. Дизлайк и канал в топку!
Zas jeden hobbík, dlato znejmekkčí části vrtáku, na dulčiku by to chtélo mírně ostřejší úhul.
Вау, вандерфул, эмейзинг! Как я не додумался до этого раньше?! Фейспалм...
👍👍👍👍👌👌👌👌
And the secret is ........???????????
Займись чем нибудь полезным. Кот когда ему нечего делать и то больше пользы приносит (хотя бы себе)
👍👍👍👍👍👌
Firmy wiernicze mówisz? Ćpanko ostro klepło.
???
Very cool. You did a great job.
Oh please. Just resharpen the bits and move on. This is stupid.
ムチャ笑った、どうやって目立てすると興味持って見てたら、それかいw
ボール盤あるのにネール買えないのか?w
しかもそれじゃ強度悪いぞw
Было дело, на ВАЗ-2105 срезало шпонку между распредвалом и звездой ГРМ, из-за того что я не основательно зафиксировал гайку на звезде. Я взял сломанное сверло на 6, его гладкое основание идеально встало на место родной шпонки.
Why would drill companies care what we do with old bits?? This isn't a secret. I hate this kind of clickbait title and this video is clever but a waste of time.
Meh
👍👍👍👍👍👍👍👍👍👍🙏🙏🙏
Membuat suatu alat tapi merusak alat yg baru, itu sama saja dengan bodoh, kalau buat suatu alat yg baru jangan korbankan alat yg lain, buat dari bahan yg sama sekali tidakk memiliki fungsi, inni bor baru di potong, sama saja..0
1.相当下手な人じゃない限り、そんな折れ方しないよ。てか釘使えばいいだろ。
2.普通にノミ買えよwww
3.卓上グラインダー砥石の側面は使用禁止ですよwてかこれもポンチ買えや。
4.無理やりリサイクルしなくていいよ。
5.あーうん、そりゃ研ぎなおしたらまた使えるよねw
Всё хреновня.
Зачем я посмотрел это дерьмо?🙈
Зато теперь знаешь, что делают буровые компании со сломанными свëрлами.
@@yuriysavintsev1896 Дерьмо перевешивает,нужен хотя бы ещё один аргумент 😁
@@allright7134 а вот иностранцы, судя по коментариям, до усрачки довольны.
@@yuriysavintsev1896 Как говорил Задорнов...
Усі дурні ,один ти грамотний 😂
Nothing whatsoever to do with "Drill companies"
Clickbait downvoted
you are TheBill...hehehe
Здрасссссстее
Ахренеть ... не иначе на Нобелевскую премию это тянет! А может за разглашение тайны как Сноудэна преследовать будут !!!
Не путай Нобеля со Шнобелем👺)))
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
👌👌👌