I never comment but this was truly so helpful! I was able to organize myself prior to starting and never had to refer back to the booklet. This was great! Moving on to part 2 next!
You made this super simple and I will now buy more furniture from IKEA listed on your channel that we like. I hated putting this stuff together as the directions sometimes don't make sense. Thank you!!
Thank you so much for this video! You saved my life today. I just moved in to a new house and lost the manual for the bed. When I thought all hope was gone and I would have to figure out this puzzle all by myself, I found your video and it is really well instructed. 100 thumbs up for you! Cheers mate!
Hello PP FaltPack, Thank you for the amazing video. I was able to assemble my bed following your step by step guide. I have observed a slight variation (may be updated) where at 15:04 you mentioned that we need to screw slats at 12th position from both left & right but the hand guide says it is 14 & the number of screws also not enough for fixing all 4 slats but for only 3 ( at 2nd slot from left & right & 14th slot)
This was an absolutely superb video explanation.I followed it every step of the way and the result was the perfect outcome. I would not have had such a successful outcome by simply attempting to follow the IKEA instructions .An excellent job.Thank you.Thank you,
Thank you very much for this but my version has one less of each type of slat and we only put three in with screws, the rest to put in with plastic. Took me awhile to figure that out since I didn't look at the original instructions (bought it 2nd hand).
Thank you so much for making this video. I’m like hard core on assembling IKEA furniture. This one and the assembly paper made me a bit angry. I have assembled a LOT of IKEA furniture and this was the most difficult ever. The assembly instructions were a little off. Normally they are really easy to comprehend. This one was awful. The Brimnes bed is very popular because it can be used in any room or even living room.2 could have gotten a used one but my kid wanted a black one.. Missing parts is not an issue with IKEA, and so is too many parts. Unless it’s the wooden plugs, there is always one or two extra.
Very engaging teaching, humour and simple to understand!🙏 Thank you very much.... Are you a teacher by any chance.? Eastern Europe? Clear precise voice....
The holes in the extremities are not positioned like yours. All holes in the rail will get screws in the middle only. No way I can have the ones on the right/left the way you have.
Mine was exactly like this, but we bought the black version. It’s probably not as popular, so it stays longer in their storage. The black was at the same price, at least here in Norway.
@@JnoPrdsobviously the upgrade must be frustrating but I don’t think they ever made an upgrade. It’s the same ole Brimnes daybed. I think you made a mistake. You must use the manual first, RUclips videos last. I just bought my Brimnes bed, and it’s exactly like this video. I made so many mistakes and misunderstood the manual. It’s important to look very closely at it. I have assembled more IKEA furniture than you can count in my life and I have never, ever experienced lack of parts or bad manual. Except for this bed. The manual is not very good. it’s complicated and I hate it. It’s still amazing how IKEA manage to sell in flat packs without missing a screw, but I had some issues with this manual, and some parts I don’t know where to go. I used the manual and normally IKEA makes it very good without any writing. And if there is parts not used, you’ll be damned lol I’m glad these videos exist.
I also love watching your videos every day it has inspired me to go to Ikea and buy brand new furniture thank you for being such a unique and awesome person
PP FlatPack Wow the UK! I have cousins from there, and no problem i’ve been able to Build a MALM bed with 4 drawers all by myself because of your video! Thanks
Wish we had your instructions instead of using those in the box. Day bed has been assembled and now we see that the three panels with the rails have been installed with the rails facing the back of the unit. How can we correct this problem because, at this point, the drawers cannot be used. Please advise. Thank you.
@@PPFlatPack no i mean during assembly, can i just assemble twin and not extendable part? Actually i have space for twin for sure but i guess not enough for both of them
Be careful when using the screws for the drawers. Their quality is extremely low and because of that I had to order extras and it took over a month to receive them.
I have TRIED EVERYTHING, its seems like the drilled holes are too tiny, im going to ikea tomorrow to get more screws cause their drill ate the insides up.
5:40 BE CAREFUL!!! The screws Ikea provide barely fit, and trying to force it will strip the screw leaving you with a screw 3/4s of the way in that you cant get out!! Make sure you choose the right drill piece and go slowly. These screws are NOT Philips head screws, they are pozidriv, so using a regular Philips head drill puece with strip it and cause big headaches.
I never comment but this was truly so helpful! I was able to organize myself prior to starting and never had to refer back to the booklet. This was great! Moving on to part 2 next!
I bought one recently and visuals help more than reading so thank you
We could not have assembled this bed without your helpful and thorough explanations and tips--thanks so much!!
Glad it worked for you. Thank you for watching
You made this super simple and I will now buy more furniture from IKEA listed on your channel that we like. I hated putting this stuff together as the directions sometimes don't make sense. Thank you!!
This one take around 2h-2,5h if you know what you doing
Thank you so much! I was strugling with IKEa manual and this videos saved me. :)
Thank you for watching
Thank you! I wouldn’t have been able to do this without your video instructions!
Thank you so much for this video! You saved my life today. I just moved in to a new house and lost the manual for the bed. When I thought all hope was gone and I would have to figure out this puzzle all by myself, I found your video and it is really well instructed. 100 thumbs up for you! Cheers mate!
Thank you for watching
screws are very easy to strip. what me and my dad ended up doing was drilling the holes prior to putting in the nail so it would be easier to fit in
You are awesome thanks for creating this video .
Glad it worked for you. Thank you for watching
LIFE SAVER.I SAVED 100 EURO
Thanks so much for the great instructions. Made an overwhelming task so much more manageable.
Thank you for watching
Hello PP FaltPack, Thank you for the amazing video. I was able to assemble my bed following your step by step guide.
I have observed a slight variation (may be updated) where at 15:04 you mentioned that we need to screw slats at 12th position from both left & right but the hand guide says it is 14 & the number of screws also not enough for fixing all 4 slats but for only 3 ( at 2nd slot from left & right & 14th slot)
Thanks for the video, thanks to you I am making a faster installation
This was an absolutely superb video explanation.I followed it every step of the way and the result was the perfect outcome. I would not have had such a successful outcome by simply attempting to follow the IKEA instructions .An excellent job.Thank you.Thank you,
Thank you for watching
Followed your steps and it was easy going. Thank you very much 💪
Thank you very much for this but my version has one less of each type of slat and we only put three in with screws, the rest to put in with plastic. Took me awhile to figure that out since I didn't look at the original instructions (bought it 2nd hand).
Thank you so much for making this video.
I’m like hard core on assembling IKEA furniture. This one and the assembly paper made me a bit angry. I have assembled a LOT of IKEA furniture and this was the most difficult ever. The assembly instructions were a little off. Normally they are really easy to comprehend. This one was awful. The Brimnes bed is very popular because it can be used in any room or even living room.2 could have gotten a used one but my kid wanted a black one..
Missing parts is not an issue with IKEA, and so is too many parts. Unless it’s the wooden plugs, there is always one or two extra.
Our pull out section with the wheels are not flat. Is that on purpose? The middle part is slightly higher than the left and right
Very engaging teaching, humour and simple to understand!🙏 Thank you very much.... Are you a teacher by any chance.? Eastern Europe? Clear precise voice....
Thank you for watching
You are a lifesaver !!!🎉
The holes in the extremities are not positioned like yours. All holes in the rail will get screws in the middle only. No way I can have the ones on the right/left the way you have.
Same issue here
Same. I think Brimnes got an upgrade recently
Same issue. Now the screws in the rail are half way in and we cannot remove them without breaking the wood. Very frustrated!!
Mine was exactly like this, but we bought the black version. It’s probably not as popular, so it stays longer in their storage. The black was at the same price, at least here in Norway.
@@JnoPrdsobviously the upgrade must be frustrating but I don’t think they ever made an upgrade. It’s the same ole Brimnes daybed.
I think you made a mistake. You must use the manual first, RUclips videos last.
I just bought my Brimnes bed, and it’s exactly like this video. I made so many mistakes and misunderstood the manual. It’s important to look very closely at it.
I have assembled more IKEA furniture than you can count in my life and I have never, ever experienced lack of parts or bad manual. Except for this bed. The manual is not very good. it’s complicated and I hate it. It’s still amazing how IKEA manage to sell in flat packs without missing a screw, but I had some issues with this manual, and some parts I don’t know where to go. I used the manual and normally IKEA makes it very good without any writing. And if there is parts not used, you’ll be damned lol
I’m glad these videos exist.
Truly helpful
Thank you - much easier than reading the instructions!
Thank you for watching
How much wooden plug you put inside with hammer? I mean will it get locked or i have to use judgement to let small part of them outside?
I also love watching your videos every day it has inspired me to go to Ikea and buy brand new furniture thank you for being such a unique and awesome person
I’m in the UK thank you for watching;)
PP FlatPack Wow the UK! I have cousins from there, and no problem i’ve been able to Build a MALM bed with 4 drawers all by myself because of your video! Thanks
Is this sturdy and durable enough for daily use of 2 Adults 200kg combined?
Great instructional. Thank you
So helpful. But stage two , the metal bar , I cannot line up extreme left and extreme right screw holes together - it is one or the other !!
Eŵ²wwwwwẅåĥĵķòø 0 😱 مرحبا
VERY HELPFUL THANK YOU SIR!!! ❤️
Thank you for watching
Man THANK YOU FOR THE VIDEO ❤❤❤
Wish we had your instructions instead of using those in the box. Day bed has been assembled and now we see that the three panels with the rails have been installed with the rails facing the back of the unit. How can we correct this problem because, at this point, the drawers cannot be used. Please advise. Thank you.
Thank you so so much!
i messed up the part with the washer, the screw broke and now i cannot remove it
Thank you very much for the very well done and very helpful video! :D
How long did it take to make it?
Great job
Super, you helped me a lot
Thank you very very much 👍🙏
Can we assemble and use just twin bed not extendable, i plan to make extendable later. Can i go with that twin bed with storage?
Yes you can use the bad closed or open
@@PPFlatPack no i mean during assembly, can i just assemble twin and not extendable part? Actually i have space for twin for sure but i guess not enough for both of them
The extending part should hold on its own.
@@PPFlatPack ok so i can hold it for future and just use single bed for now and even storage also .
I have follow and done the part 2. Great Video.
such good and helpful vid! doing it with my dad. This 100% should be everyone, who watches should sub
Thank you for watching
Tks for help
thank you! (pt 2!)
5:40 those screws are not fitting in, is this an ikea issue or my incompetence? 🙁
I had the same problem and ruined the screw
what did you guys end up doing? I am having the same problem and the heads are so worn out they dont go in or out anymore
@@midnight_rambler5571 i ended up using a drill to fit those screws in
Same here
Having same issue 🙁 screws are all worn now
This should be in ikea website
Agree :)
Thank you
At 4:41, you swapped up side down without saying a word. That is MEAN!!!
thank u so much!
Be careful when using the screws for the drawers. Their quality is extremely low and because of that I had to order extras and it took over a month to receive them.
Screws don’t fit (time 6:35) now they are worn out
Hi brenda im having the same issue , did you find a solution
I have TRIED EVERYTHING, its seems like the drilled holes are too tiny, im going to ikea tomorrow to get more screws cause their drill ate the insides up.
We’re having that same problem right now. We called to get replacements so hopefully it works.
Exact same problem I'm furious.
Sublime!
Thank you!!
5:40 BE CAREFUL!!! The screws Ikea provide barely fit, and trying to force it will strip the screw leaving you with a screw 3/4s of the way in that you cant get out!!
Make sure you choose the right drill piece and go slowly. These screws are NOT Philips head screws, they are pozidriv, so using a regular Philips head drill puece with strip it and cause big headaches.
20% screws are very easy to strip. Even you are using ikea screwdriver and bit. I had to go back ikea to get some
Definitely electric screwdriver is the right move for all ikea assembly or any diy.
very helpfull
3:38 ..Ikea tried to fool me :D both sides are white in my shipment :D
Thank you. I couldn't understand the pictures. 😭
Thank you for watching
Hey Flat Pack! I love your voice what country are you from?
I love you xx
Sir this model is quality issues . I'm open challenge
👏🏾👏🏾👏🏾
😩
Don't buy products is delicated
En français svp
??? Lol il parles pas francais
Hello sir don't buy this model
Great job
Thank you bro!!
Thank you !
Thank you 👍🏻
Thank you 🙏🏼