Comentário brasileiro: funcionou extremamente bem, após esse tutorial nunca mais perdi sinal, não conseguir passar de 700 metros sem congelar a imagem e agora já fui a quase 2 km perfeito. Muito obrigado! (FCC + booster 1.8w)
Great tutorial. Here in Australia CE mode is ok on the Mavic Pro but I just need a little more range not for distance but penetration through objects. thanks
This worked in windows 10 64 bit no problem. One thing I had to do is to open a command prompt first, then navigate to the mod directory, then type install_mod.bat. for some reason double clicking on it didnt work. Then I attached my mavic pro, went into transmission settings while the device was connected and low and behold it worked! I shall test soon when I send my drone into outer space.
Wow, I was already subscribed to you but I didn't know this was JS from the Lounge.. Excellent video, thanks a bunch man.. You kinda sound like a fella who videos I would watch about tutorias about Phantom 2 Vision & Vision + first came out . Think it was called: At the Kitchen Table or something along that line.. You guys make it look so easy.. - Cheers
Yes it’s me JS, and it was Simon newton at the kitchen table, he started in quads a couple of years before me and was my inspiration to start doing videos which is why most are filmed on my kitchen table still , all I learnt was from watching SN plus others as well, it was a shame when he changed .
@@FlymyPhantom no kidding.. he was a cool guy, always started his videos off with a toast either of coffee or some hard to pronounce wine..lol.. Yeah, you remind me of him a lot... Simon, yep thats him.. He knew his stuff before drones became so popular as today.. Great video you made, thanks so much..It's so much easier for me when I watch someone else do the mods like you did.lol....Again thankyou!
I have followed all steps, however, at the cmd prompt, after selecting any key to continue, my selections are all followed by 'access is denied' thoughts?
I found that the ADB drivers are no longer included in the DJI Assistant download. The drivers are included in the jkson repository download and work just fine.
Hello. I have similar issue, but with Phantom 4 RTK, which has built in display on the controller. For EU and UK versions the network RTK server can only be accessed using a 4G dongle with SIM card. It is not possible with the UK and EU versions to connect to the drone and to other WiFi device in the same time. See 8th page of the user manual. Do you know any solution? How to make USA version from EU version of P4RTK? I do not need longer range, I need only the possibility to connect the controller to an external WiFi device while the controller connects to the drone too.
Error when enabling ADB driver. It says that COM3 doesn't exist. What can I do? I tried to to what's on the end of the video, but it doesn't even says DJI (it doesn't appear there nothing). It just says DJI in devices menu of Windows 10, bluetooth and other devices
To anyone having this error, I have fixed this with 2 differend drones by using the onled version of DUMLdore (3.10) github.com/jezzab/DUMLdore/releases/tag/v3.10
Hello, did u try FORCE 2,3/2,5 GGZ? Does FCC+ boost also apply to these frequencies? I have not found any clarification why those two have been added as an option....tks
I did what you said, i m using DJI Go android v4.0.7, 1st i flashed both AC&RC to v1.04.0300, I got 30m/50m restriction, I rolled back to v1.04.0000, it didn't work also, how can I get rid of this restriction? It seems like it gets FCC but with limits! Can you help me plz?
With win 10 should get same response from PowerShell/Command promt after "adb shell" command? I get some long response with red text. In device manager i dont see any new non driver installed yellow question marked devices..
i cant do it. when i try the "adb shell" i take back the msg "error: no devices/emulators found". I havent in the dji folder/drivers the folder adb drivers. what can i do?
HI I have DJI Phantom pro V2 FW 01.00.2200 Will that work ? i GOT DUMLDORVE RUNING AND enable ADB But in Shell it did not know what ADB command is ? My phantom come as Com port to my PC is that wrong ?
Sounds like you haven’t installed the DJI drivers, install the relevant DJI assistant program and when you quad is plugged into the pc check there is a DJI port in device manager
@@flymyphantom9603 after enabling adb I get unhandled exeption has occurred in your application. If you click continue., the application will ignore this error and attempt to continue. If you click quit, the application will close immediately. The specified port does not exist.
Sorry i was signed in with other account, if you get that error check that you can see the quad in assistant software, make sure you close out assistant software or the port that dumbldore needs gets locked out by the assistant software
@@FlymyPhantom i get this error to. so ive done as you have said. my mavic pro shows up in the assistant software, i close that down and re start the process and still get the same error. would really like to solve this
Hi, Is this tip compatible with Phantom P4 Pro+ V2.0? As far I know, the drone is the same with the P4 Pro V2.0. The only difference is that in plus version we have an integrated tablet in the RC. My aircraft firmware is 01.00.2200. Thank you!!
The only difference with the Pro+ is the controller but the drone must be the same as a Pro V2.0. You can see in the transmission state if the mod worked or not. The bar is lower than 4km. Before it was higher. This is ideal!! Losing signal is bad.
Hello this is carlos. I do not understand english. I did the steps but it does not work . perhaps the problem is the steps when you write "adb shell". I do not how to do it. thanks
hello what are the steps out on the field ready for fly because ive done everything from video perfect and when im at home and turn mavic on its in fcc mode permanent but when i went on field other day seem to be in ce mode and ive just switched it on again like now and its in fcc mode lol whats the steps before flight
@@FlymyPhantom hello little update tested workin now just had 2.5 mile and receiever still one bar off full signal hd feed was still full signal just the battery what mad me come home thanks again also can i update the drone and the mod stays
Hello Sir . I just updated the firmware to 500 and its gone back to CE mode . Is this normal as i thought it was permanent i have no problem leaving it on 300 its just the annoying update firmware is there all the time ,
@@FlymyPhantom. Thanks I've put it back to 300 working again now . One other question a friend of mine has just bought mavic 2 , will this work on that also .
Im on V01.04.0500 on my mavic pro platinum.To downgrade any firmware at all would i firstly need to open up platinum and install 'internal sd card'.Hope you can help much appreciated
Not 100% sure, I think you can downgrade to 01.04.0300 using the assistant software, I think the SDcard is needed to flash below 01.04.0100, worth trying
Thanks for this great video. One question. Does it matter if you turn on the RC or the Mavic first in implementing the Force Boost? And what about the 2.5 GHz band? There are some posts that for 2.5GHz to be activated you need to turn on the RC mode first.
From what I’ve read, turn on the quad first as the mod is written to the quads memory this will then tell the RC what the frequency is, the TX usually gets its location via the GPS in your phone via the app from what I can work out
@@FlymyPhantom Thanks. I have tried turning on the RC first, and the FCC Boost does work. However, i cannot find a way (through the Go app or any other way) of verifying that i am on 2.57 GHz instead of 2.4 GHz.
I just acquired a Mavic pro here in the UK and I've done the mod. I had to downgrade from 1.04.0500 to 1.04.0300. I used DJI Ass 2 to do this. I then noticed the release notes on 1.04.0500 say that once loaded it is not possible to downgrade to an earlier version but it worked for me! The other steps went without a problem except I had to run Dumldore twice. I didnt see the driver issue. I loaded FCC Boost. I have the line above the -9 mark so that looks good but I havent tested range yet. But will be great if it works. I'm using the latest DJI Go 4 and it seems to work fine barring the FW out of date warning. So will a firmware upgrade overwrite the mod and will i have to stay with 1.05.0300? and is this likely to be a problem with future releases of DJI Go 4? Cheers Stu
All the later versions say you can’t downgrade, this just means you can’t go lower than those shown in the asst, yes you can upgrade and the mod won’t go away until you run the mod again and choose remove
@@FlymyPhantom Well I've just tried upgrading back to 1.04.0500 and the mod didn't stay the line is now below the -9 mark! I'll start from scratch and reapply the mod and leave it on 1.04.0300 I guess
Hi mate I have a DJI Mavic pro in the U.K. My DJI Go 4 app says version v4.3.32. Will this mod work on this version? If not what can I do? Cheers mate good work.
Yeah I managed to do it and it worked! Lovely stuff BUT it seems I can’t use the quick shots feature anymore? Has this happened to you before? The icon for it has just vanished from the screen.
Hi there, so i will downgrade to ver 1.04.300 and after succesfully got the fcc mod done here will i be able to continue updating to the newest firmware?
@@FlymyPhantom thanks for the reply. Apparently the FCC mod will not work after i upgraded the firmware to the latest 01.04.0500. That's a shame. Hope there will be a fix soon.
You need to downgrade to 0300 to apply the mod, there isn’t much difference between 300 and 500, use the nolimitdronez app to downgrade it works better than the DJI assistant nolimitdronez.com/
Subd. I bought that nld the other day and tried putting my Mavic down to the firmware for nfz and hight restriction and it kept failing unbreak DJI downgrade . Is their a certain way of downgrading the firmware , I'm on the newest release as of today, I'll be waiting for the video I've just done the FCC trick from this video thanks for the tutorial.
@@FlymyPhantom How come the hacking community skips all the hacks for the p4p? The only hack available for it is the 32 channels which doesn't do much in a CE country. I doubt they will be putting any further work on its old lightbridge 2 system, especially when the bird has been discontinued. What do you think?
Not always needed, enable ADB and look for the DJI with yellow exclamation mark and then follow the video, if there is no DJI with exclamation mark then the driver is installed , check root access as shown in the video
@@vudlalogo1368 its free if you are willing to take the time to learn how the quad works and then create a program that will do what you are asking, otherwise no, you will have to pay someone, the same as all of us clueless people
@@FlymyPhantom Thank you for the tip! It worked as it should when I had it downdraded to 300, but when I ugraded it back to 500. The mod disappeared. Is there any way to keep the mod in 500, or is it OK to fly with my Mavic Pro with the 300? :)
@@FlymyPhantom I will try it agian, maby I did something wrong. :) But I tried to fly with it today with the mod and 300. And it was perfect! I went out 3000 meters, no problems what so ever! You are the best! :)
Hi you should definitely do a video on the super patcher mod by brett8883 on the Mavic forums. Finally we have a simple way to mod the height and NFZ on 1.4.300 and the best bit is you can then add this Jkson mod over the top!
The super patcher ? Is that the one that uses python ? If so it may be a bit complicated for many, saying that Steve Barnes is creating a batch file that will fully automate the process . Not sure who Brett is, have you a link to the relevant thread
@@FlymyPhantom Yes its using the patcher, but someone wrote a batch file that applies the whole thing for you! It seems to work great and you can apply the JKson FCC mod over the top afterwards.:-) github.com/brett8883/DJI_Super-Patcher?fbclid=IwAR2xnqvwo_XysYvthsBlViVD5N5Qj65KjwQ7BsDeKBmWNDUcnD8dNpBQKtM
@@FlymyPhantom It is much simpler and basically less than 2 minutes to install. It works great and you can add the Jkson mod on top (i have already done that and i verify it works).
For those of you who are looking for a iOS method to get *FCC* on their *Mavic 2* or any other DJI drone on the latest firmware: I‘ve done a how-to on my channel!
Comentário brasileiro: funcionou extremamente bem, após esse tutorial nunca mais perdi sinal, não conseguir passar de 700 metros sem congelar a imagem e agora já fui a quase 2 km perfeito. Muito obrigado! (FCC + booster 1.8w)
ola, como fez
@@droneskyline seguindo o tutorial do vídeo oras rs
hi dude thank you for this worked hardest part is the adb mob and downgrading firmware to 01.04.0300 but after that easy nice work guys
Dear Mr FlymyMavic . I have come back to your tutorial just to say a huge Thanks .Sir You are the Boss .
so happy you got it working mate, now go fly and enjoy
Only just found this. Very straightforward to do and it now in fcc
Great tutorial. Here in Australia CE mode is ok on the Mavic Pro but I just need a little more range not for distance but penetration through objects. thanks
Nice power hack for the Mavic. It's great to see you back again. Cheers.
Awesome !! just gave the creator some money via Paypal, worked perfect on my Phantom Pro 4 V2
TOp man, wish more did, glad it’s worked for you
It just putted on fcc? Or it gave an extra boost? How far did you get?
This worked in windows 10 64 bit no problem. One thing I had to do is to open a command prompt first, then navigate to the mod directory, then type install_mod.bat. for some reason double clicking on it didnt work. Then I attached my mavic pro, went into transmission settings while the device was connected and low and behold it worked! I shall test soon when I send my drone into outer space.
Thank you man. I did it with the little modifications but its probably going in FCC;-)
Thank you for your tutorial. Greetings from Norway
funker det ?
Thanks for the tutorial !!!! Thus we will be able to fly in FCC mode even using the latest verson of DJIGo4 app
Yes any version of GO and Litchi plus it sticks even if you update the firmware
@@FlymyPhantom awesome mate, did you mean the firmware on the drone and controller?
Yeah the quad, the TX /RC is irrelevant
@@FlymyPhantom would this also work if usig the dji smart controller?
Hi, the mod is permanant, its written to the bird and the file made read only, remember this is for the MP1 the smart controller is only for the MP2
Wow, I was already subscribed to you but I didn't know this was JS from the Lounge.. Excellent video, thanks a bunch man.. You kinda sound like a fella who videos I would watch about tutorias about Phantom 2 Vision & Vision + first came out . Think it was called: At the Kitchen Table or something along that line.. You guys make it look so easy.. - Cheers
Yes it’s me JS, and it was Simon newton at the kitchen table, he started in quads a couple of years before me and was my inspiration to start doing videos which is why most are filmed on my kitchen table still , all I learnt was from watching SN plus others as well, it was a shame when he changed .
@@FlymyPhantom no kidding.. he was a cool guy, always started his videos off with a toast either of coffee or some hard to pronounce wine..lol.. Yeah, you remind me of him a lot... Simon, yep thats him.. He knew his stuff before drones became so popular as today.. Great video you made, thanks so much..It's so much easier for me when I watch someone else do the mods like you did.lol....Again thankyou!
After enabling ADB what should I do to force install the ADB driver to install?
Thank you very much for your hard work !
My pleasure! thanks
I have followed all steps, however, at the cmd prompt, after selecting any key to continue, my selections are all followed by 'access is denied' thoughts?
are you running as admin ?
I found that the ADB drivers are no longer included in the DJI Assistant download. The drivers are included in the jkson repository download and work just fine.
Thanks for the info
Hello. I have similar issue, but with Phantom 4 RTK, which has built in display on the controller. For EU and UK versions the network RTK server can only be accessed using a 4G dongle with SIM card. It is not possible with the UK and EU versions to connect to the drone and to other WiFi device in the same time. See 8th page of the user manual. Do you know any solution? How to make USA version from EU version of P4RTK? I do not need longer range, I need only the possibility to connect the controller to an external WiFi device while the controller connects to the drone too.
Hi, after a DJI firmware update, would the FCC mode still be activated or would we have to do this again ?
I actually don’t know the answer to that question, I will look into it and find out
Thanks
@@FlymyPhantom was wondering that myself re firmware upgrade you did say you would look into it
@@droneskyviews i tried it, when i downgrade to 01.04.0300 and enable FCC mode, then upgrade to latest firmware, it will change it back to CE mode
Error when enabling ADB driver. It says that COM3 doesn't exist. What can I do? I tried to to what's on the end of the video, but it doesn't even says DJI (it doesn't appear there nothing). It just says DJI in devices menu of Windows 10, bluetooth and other devices
To anyone having this error, I have fixed this with 2 differend drones by using the onled version of DUMLdore (3.10)
github.com/jezzab/DUMLdore/releases/tag/v3.10
FCC boost works great on the P4PV2.0.
Hello, Is this still effective in 2022? I have an old Mavic Pro and I'd like to switch to FCC. Thank you very much
Hello, did u try FORCE 2,3/2,5 GGZ? Does FCC+ boost also apply to these frequencies? I have not found any clarification why those two have been added as an option....tks
I did what you said, i m using DJI Go android v4.0.7, 1st i flashed both AC&RC to v1.04.0300, I got 30m/50m restriction, I rolled back to v1.04.0000, it didn't work also, how can I get rid of this restriction? It seems like it gets FCC but with limits! Can you help me plz?
Were u under GPS mode when seeing 30m/50m restrictions?
@@mickeylui Yeah
@@nicklesscage Did you were in beginner mode?
Mavic 2 supported?🙏🙏
please help
Do I need to install the mod only on the copter or even on the remote control?
Worked for me cheers bro 👍🙂
does this still work on Mavic 2 pro?
ok thank you nice work on mavic pro
This totally worked. There are some new options after 4, can you explain those? Gimbal and FPV settings + FCC? Thx
Remember to install dji assistant software and make sure you can see your Mavic in it, close assistant before launching dumbldore
thank you , can we fly phanthom4 without gps because i remove it
I'm asking for help. the ADB SHELL command does not respond. can you help me? thank you
Hi it's easier to use drone-hacks.com
@@FlymyPhantom do i have to pay for it?
With win 10 should get same response from PowerShell/Command promt after "adb shell" command?
I get some long response with red text.
In device manager i dont see any new non driver installed yellow question marked devices..
Ok, so powershell and command promt are different things and direct folder have to adjust manually in command promt.
power shell is not Command prompt
i cant do it. when i try the "adb shell" i take back the msg "error: no devices/emulators found". I havent in the dji folder/drivers the folder adb drivers. what can i do?
this video has now been super ceded by a tool called Brett’s Superpatcher, its easier to use, use google to get it thanks
@@FlymyPhantom thank you very mach!
Thank you so so much. Your the 💣
HI I have DJI Phantom pro V2 FW 01.00.2200
Will that work ?
i GOT DUMLDORVE RUNING AND enable ADB
But in Shell it did not know what ADB command is ?
My phantom come as Com port to my PC is that wrong ?
Sounds like you haven’t installed the DJI drivers, install the relevant DJI assistant program and when you quad is plugged into the pc check there is a DJI port in device manager
@@FlymyPhantom Hi
Driver my PC have install after I install DJI assist 2 as DJI Vision (Interface 3)*I believe you like to see ABD ?
Hello, my MP is 1030700 already modify parameters. Do i need do this?? Thank you. Sorry im noob.
I can connect through assistant but get a pop up after enabling adb
What pop up ?
@@flymyphantom9603 after enabling adb I get unhandled exeption has occurred in your application. If you click continue., the application will ignore this error and attempt to continue. If you click quit, the application will close immediately. The specified port does not exist.
Sorry i was signed in with other account, if you get that error check that you can see the quad in assistant software, make sure you close out assistant software or the port that dumbldore needs gets locked out by the assistant software
I can see it through assistant and the NLD app but everytime I run dumldore and enable adb I get that popup?
@@FlymyPhantom i get this error to. so ive done as you have said. my mavic pro shows up in the assistant software, i close that down and re start the process and still get the same error. would really like to solve this
I can`t install the adb-driver. When i want to install, Windows says Hash is not correct!? I`ve Win 8.1
same problem, i have downloaded official android adb drivers then it works.
@@michalknapek5697 Thank you! It works.
Enable FCC mode on the Mavic Pro not working
Hi, Is this tip compatible with Phantom P4 Pro+ V2.0?
As far I know, the drone is the same with the P4 Pro V2.0. The only difference is that in plus version we have an integrated tablet in the RC. My aircraft firmware is 01.00.2200.
Thank you!!
No, at the moment there isnt any way for the pro plus
The only difference with the Pro+ is the controller but the drone must be the same as a Pro V2.0. You can see in the transmission state if the mod worked or not. The bar is lower than 4km. Before it was higher. This is ideal!! Losing signal is bad.
no enable add ples help
Been a long time since used this could you tell me why im recieving this daemon not running starting now at tcp 5037 thankyou
Have you installed the ADB driver
@Flymyphantom just managed to fix it I think it was the cable tried another got it working windows 11 thanks
If you choose other does that mean you can mod the M2?
Hello
this is carlos. I do not understand english.
I did the steps but it does not work . perhaps the problem is the steps when you write "adb shell". I do not how to do it.
thanks
Nice work thanks!
Very cool mate 👍🏻
i made everything but not working i think last one install mode part different for your please help me
What is going wrong
hello what are the steps out on the field ready for fly because ive done everything from video perfect and when im at home and turn mavic on its in fcc mode permanent but when i went on field other day seem to be in ce mode and ive just switched it on again like now and its in fcc mode lol whats the steps before flight
thats strange, once in FCC it shouldnt matter where you fly, best advice is to switch the quad on first then turn on the TX and then connect the app.
FlymyMavic ok thanks for the quick respond mate
@@FlymyPhantom hello little update tested workin now just had 2.5 mile and receiever still one bar off full signal hd feed was still full signal just the battery what mad me come home thanks again also can i update the drone and the mod stays
Hello Sir . I just updated the firmware to 500 and its gone back to CE mode . Is this normal as i thought it was permanent i have no problem leaving it on 300 its just the annoying update firmware is there all the time ,
yeah 300 is the magic number, I mention that in the description I think
@@FlymyPhantom. Thanks I've put it back to 300 working again now . One other question a friend of mine has just bought mavic 2 , will this work on that also .
no just the quads stayed in the title
@@FlymyPhantom. Ok thanks for all your help I wont pester you anymore . I have subscribed gonna watch your other vids now cheers .
thanks very much, always happy to answer questions (unlike some youtubers)
Im on V01.04.0500 on my mavic pro platinum.To downgrade any firmware at all would i firstly need to open up platinum and install 'internal sd card'.Hope you can help much appreciated
Not 100% sure, I think you can downgrade to 01.04.0300 using the assistant software, I think the SDcard is needed to flash below 01.04.0100, worth trying
@@FlymyPhantom thankyou i will give it a try
Does something like this exist for mavic2?
Thanks for this great video. One question. Does it matter if you turn on the RC or the Mavic first in implementing the Force Boost? And what about the 2.5 GHz band? There are some posts that for 2.5GHz to be activated you need to turn on the RC mode first.
From what I’ve read, turn on the quad first as the mod is written to the quads memory this will then tell the RC what the frequency is, the TX usually gets its location via the GPS in your phone via the app from what I can work out
@@FlymyPhantom Thanks. I have tried turning on the RC first, and the FCC Boost does work. However, i cannot find a way (through the Go app or any other way) of verifying that i am on 2.57 GHz instead of 2.4 GHz.
You would need a signal analyser I guess to find out
@@FlymyPhantom Probably so...
Oh I just checked :'( not supported
Hello, would this work on P4 standard? Does it still work in 2021?
Hi
No due to the P4 standard being lightbridge
hi does this work with the P4P V1 also? cheers
Does this work on the Pro Platinum? I’ve tried it but it doesn’t work for me. I’ve done everything right?
yes it works on the MPP, you must be on 01.04.0300 FW
FlymyMavic yes I downgraded to 0300. All I had to do was discount everything and try it again and it worked! Thanks. Any other tricks for the mpp?
Obrigado deu certo comigo Mavic pro
você notou melhora real no sinal?
hello
I can not get the pop menu . So I can not type "adb shell"
I do not how to do that in my computer window 10
its just a way to check ADB and isnt important
hello this can use for new white mavic pro?
Yes
I just acquired a Mavic pro here in the UK and I've done the mod. I had to downgrade from 1.04.0500 to 1.04.0300. I used DJI Ass 2 to do this. I then noticed the release notes on 1.04.0500 say that once loaded it is not possible to downgrade to an earlier version but it worked for me! The other steps went without a problem except I had to run Dumldore twice. I didnt see the driver issue. I loaded FCC Boost. I have the line above the -9 mark so that looks good but I havent tested range yet. But will be great if it works. I'm using the latest DJI Go 4 and it seems to work fine barring the FW out of date warning. So will a firmware upgrade overwrite the mod and will i have to stay with 1.05.0300? and is this likely to be a problem with future releases of DJI Go 4? Cheers Stu
All the later versions say you can’t downgrade, this just means you can’t go lower than those shown in the asst, yes you can upgrade and the mod won’t go away until you run the mod again and choose remove
@@FlymyPhantom Well I've just tried upgrading back to 1.04.0500 and the mod didn't stay the line is now below the -9 mark! I'll start from scratch and reapply the mod and leave it on 1.04.0300 I guess
I cannot seem to upgrade back to 1.04.0500 without losing the mod. Is everybody else finding this to be the case?
i started looking at this the other night, then got side tracked wiith a nolimitdronez issue, i will revisit it hopefully tonight and let you know
@@FlymyPhantom I used DJI Ass 2 and upgraded from 0300 to 0500 should I have upgraded to 0400 first?
Dumldore won't run while i have my mavic pro powered on, if not it works but get frameware error.
Perhaps sending me a screen shot of the issue may help flymymavic@outlook.com
Update net frame work
Thanks i have the latest version, do i have to also downgrade firmware in mavic?
You have to be on 01.04.0300 but you can upgrade after doing the mod
Ihave now .500 which might be issue
hello super tutorial but which version of dji go4 i should use on android
thank you
Any version you want
just put together a collection of all the android apks here github.com/Judslat/APKcollection
Hi mate I have a DJI Mavic pro in the U.K. My DJI Go 4 app says version v4.3.32. Will this mod work on this version? If not what can I do? Cheers mate good work.
Hi mate, app version is irrelevant.
Yeah I managed to do it and it worked! Lovely stuff BUT it seems I can’t use the quick shots feature anymore? Has this happened to you before? The icon for it has just vanished from the screen.
Hi there, so i will downgrade to ver 1.04.300 and after succesfully got the fcc mod done here will i be able to continue updating to the newest firmware?
See pinned comment
@@FlymyPhantom thanks for the reply. Apparently the FCC mod will not work after i upgraded the firmware to the latest 01.04.0500. That's a shame. Hope there will be a fix soon.
Is that a fact ?im going to test tonight
@@FlymyPhantomyes that is. I've tried and tested. The FCC is reverted back to CE.
Great tutorial, is there an ABD mod for for OVER 300 version? im sitting on 500
You need to downgrade to 0300 to apply the mod, there isn’t much difference between 300 and 500, use the nolimitdronez app to downgrade it works better than the DJI assistant nolimitdronez.com/
Is the nolimitdrone client worth it?
Subd.
I bought that nld the other day and tried putting my Mavic down to the firmware for nfz and hight restriction and it kept failing unbreak DJI downgrade .
Is their a certain way of downgrading the firmware , I'm on the newest release as of today,
I'll be waiting for the video I've just done the FCC trick from this video thanks for the tutorial.
Gavin follow my other video here m.ruclips.net/video/W0YKJuVioUc/видео.html
Any specific version of DJi Assistant?
You don’t need the asst for this just the mod and dumldore
You don’t need the asst for this just the mod and dumldore
Does it works on phantom 4 standard? It can be done just by phone?
no sorry just the quads listed in the title
@@FlymyPhantom thanks for the quick answer
cant click on the Enable ADB button?
if its greyed out then the drivers havent loaded, does Dumldore show your quad type at the bottom ?
@@FlymyPhantom works now 🤪
Is this mod detectable when flying or would they need to examine the drone . Thanks for your great work
I guess someone near to you with a power meter could tell, or looking at the app. Other than that I would say no.
which option do we use for the P4P.
This is only for the P4Pv2, when you run the batch file you choose option 2
@@FlymyPhantom How come the hacking community skips all the hacks for the p4p? The only hack available for it is the 32 channels which doesn't do much in a CE country.
I doubt they will be putting any further work on its old lightbridge 2 system, especially when the bird has been discontinued. What do you think?
How do you force update the driver?
Not always needed, enable ADB and look for the DJI with yellow exclamation mark and then follow the video, if there is no DJI with exclamation mark then the driver is installed , check root access as shown in the video
The abd is greyed out
Sounds like you haven’t installed the dji assitant software
I have Already got the assistant software
Does dumbldore show that the quad is connected, if not you need to sort that out
Will there be a update so it works with the p4 pro plus?
Not that i know of, the plus hasnt been hacked yet
Is there anyway of doing this via a Mac?
from what I know most Mac users use boot camp but there is now a program called drone-hacks that has a Mac version in Beta you can use
@@FlymyPhantom They are not accepting any more beta users it says. Boot camp requires 64gb of free storage which I don't have...
Can't install adb driver 😭
What happens ?
@@FlymyPhantom but now it works, thanks dude 😀
Dewo AlfaUk
Thank you so much. Will this work with nld?
You get this option on NLD
Does this work for Mavic 2 zoom
No sorry you will need to use
drone-hacks.com/
Can you use for phantom 4?
No use drone-hacks tool
Does this work on mavic 2 pro? If not how can i get it on mavic 2 pro please?
you can use Nolimitdronez app for the MP2
@@FlymyPhantom NLD doesn't work with the new firmware.
does it work on the p4p?
Yes
NO!... I did try!...
Does this work with mini 2 se?
No, for that use the website drone-hacks.com
@@FlymyPhantom tnx bro
Is any app(windows or android ) free for unlock fcc
@@vudlalogo1368 its free if you are willing to take the time to learn how the quad works and then create a program that will do what you are asking, otherwise no, you will have to pay someone, the same as all of us clueless people
works on mavic 2? .400 firmware?
NO, you will need to use NLD for the m2
Thank you!
is there any way for p4 pro ??
Drone-hacks.com
Thanks. It's works in IOS DJI GO ?
Yes any app
Hello ,it looks ,it Will be In spanish .?? Thank You
Does anyone know if there is a simular hack for P4 standard ?!
you would need to use either the NLD modded app or the deejayeyemodder tool to create it see my channel for the DJImodder tool video
@@FlymyPhantom thanks
Works on v1.04.0500 as far as you know?
No
Hi, does it work with P4 as well?
Yes it says in the video
@@MasterYota1 V2
Great job FlymyMavic!!! :) I have a Mavic Pro Platinum 1.04.0500, is there any way for me to enable FCC mode? :)
use the assistant software to downgrade and then apply the mod, then upgrade back to 500
@@FlymyPhantom Thank you for the tip! It worked as it should when I had it downdraded to 300, but when I ugraded it back to 500. The mod disappeared. Is there any way to keep the mod in 500, or is it OK to fly with my Mavic Pro with the 300? :)
Strange I’ve gone up and down with FW and the mod stayed. Oh well 300 is fine to fly with
@@FlymyPhantom I will try it agian, maby I did something wrong. :) But I tried to fly with it today with the mod and 300. And it was perfect! I went out 3000 meters, no problems what so ever! You are the best! :)
@@magnusmelander5758 i have the same problem on my mavic pro platinum. do you find the solution ?
Hi you should definitely do a video on the super patcher mod by brett8883 on the Mavic forums. Finally we have a simple way to mod the height and NFZ on 1.4.300 and the best bit is you can then add this Jkson mod over the top!
The super patcher ? Is that the one that uses python ? If so it may be a bit complicated for many, saying that Steve Barnes is creating a batch file that will fully automate the process . Not sure who Brett is, have you a link to the relevant thread
@@FlymyPhantom Yes its using the patcher, but someone wrote a batch file that applies the whole thing for you! It seems to work great and you can apply the JKson FCC mod over the top afterwards.:-)
github.com/brett8883/DJI_Super-Patcher?fbclid=IwAR2xnqvwo_XysYvthsBlViVD5N5Qj65KjwQ7BsDeKBmWNDUcnD8dNpBQKtM
@@FlymyPhantom It is much simpler and basically less than 2 minutes to install. It works great and you can add the Jkson mod on top (i have already done that and i verify it works).
thanks
FCC in the .u.s.a is 04. Watts 400 mw
yeah i couldnt find a source and just read from the mod site, thanks for that mate
For those of you who are looking for a iOS method to get *FCC* on their *Mavic 2* or any other DJI drone on the latest firmware:
I‘ve done a how-to on my channel!
Fake do not exist 😅
en españollllll ...PLEASE ;)
Und jetzt das selbe auf deutsch :-)
kannst ja wenigstens Englisch lernen.... =) ahh Hartz 4 reicht