I was going to ask if I bought a cheap one from o reilys you think the mount would cause problems to the automatic tensior where it would make noises while driving?
I owe u sooo much man...I did this today for the civic and it is quiet as a church mouse now....it was real bad yesterday and I really appreciate the how to vid...keep up the great work 🤘🏾
Thxs so much for this video. This was a great learning experience for my son and I on his car. We purchased the part from Parts geeks and a few tools from Harbor Freight and it saved us hundreds of dollars. As long as you have the where with all to accomplish a task like this; go for it! Get the tools if you don't have them and you'll be aight 👌 💯 🤪. This video was worth a thousand bucks!!!
Tysm. My motor mount was completely caved in. 🤦🏽♀️🥲 I’m a 25 year old woman with some simple car repairs under my belt. This one was a lil more involved but I still managed. Took me 3 hours only cus I struggled getting the mount to line up when putting the new one in, but I got it. The car runs like butter now. No vibrations, no clunks, it’s truly amazing. Ty for your knowledge especially the torque specs 💁🏽♀️ gonna try and replace the lower torque mount in a few weeks too but it’s a night and day difference just from replacing this one. 😇
I can't tell you how helpful and cost-saving your videos have been. Thank you so much. My question is about the torque settings at the end of this video. What you did here makes more sense to me. However, in my Haynes Repair Manual, it says that I should torque the two 17mm "mount-to-body" bolts to 69 lb.-ft, and the 19mm "mount-to-engine" nut and bolt to 47 lb.-ft. It doesn't seem to make sense to me that I should tighten the smaller bolts more than the larger ones. I just wanted to confirm that I should ignore the Haynes Manual and just stick to what you did here. Thanks again Mr.Ranger.
A good way to tell is drive at highway speed and accelerate quickly. You'll feel shaking and wobbling til you let off the throttle. Or while parked, put the car in drive and tap the throttle while keeping your other foot on the brake. Check for excessive engine movement.
Thank you for this video!! Just replaced this mount today and did the torque mount a few days ago when I did the oil change. I was quoted $1247 to replace all of them although I feel that’s reasonable I just don’t have the money.
Great video. Only thing I want to point out which might or might not be important is you mixed up the torque specs for the bracket to engine bolts with the mount to body bolts. It's the other way around according to the Hanes manual
I have a Honda Civic LX 2012. The mechanic said I need to change the same exact engine mount as shown in this video with the washer fluid flask next to it. I am a bit confused though on the labelling. He said to get the right front motor mount in front of the passenger seat but he said its actually called the left engine motor mount when searching online for the part. is he correct?
Fantastic video. Why anti-seize on the bolts? I feel like it's the other way around and that you need Loctite thread lock on there, no? These parts experience a lot of vibration.
For this vehicle, is there only 1 engine mount place? Thanks for the video btw. Going to the dealership tom for a quote.. Not sure if this is something I should just do myself. Would need to buy some tools.
Found another video, its called the or transmission mount (if you're seated in the driver seat, it's on the left. This video is for the engine mount on the right. Follow up question, how do you know your transmission mount is bad? You can visually inspect the right side engine mount, but what about the left?
what size are the bolts that mount the bracket to the mount and the body? I have a 12 lx mine mounts with one bolt to the body and one threaded stub and nut to the mount
Make sure to fully tighten the bolts after lowering the jack supporting the engine, don't tighten the bolts while the engine is jacked up. Also use OEM mounts.
If I'm replacing all 3 how should I do that? Follow this procedure, then replacing the transmission mount loosen the engine mount first, then hand tighten both and torque both?
Question - I just replaced the mount last night. One of the bolts, that attaches to the frame of the car, will not thread back in. Did you experience this? If yes, can you please let me know what you did to resolve the issue? Thank you in advance.
I removed all the bolts/nuts, but some how I was not able to remove engine mount. Something is preventing the motor mount, may it is the top bolt bend slightly. Don`t know how to solve it.
The engine has to be supported when you remove the motor mount because the mounts are holding the engine in. When you remove or reinstall the mount, you jack up the engine a tiny bit, maybe less than few inches.
I get really rough vibration when putting it on reverse and a little less on drive (specially at the front seats and dash) and also jutters when i press/release the gas pedal and just recently the air intake hose split at one of the inner joints. Are these symptoms of bad engine mounts?
Had the same problem. Saw that the air intake hose was split and was loosing compression but realized that was due to vibrations of the failed front right engine mount.
Hello, what type of bolt is securing the bracket to the transmission mount? Im having a hard time being able to separate the two units from each other to be able to stick the new mount in with the old bracket. Id really appreciate your feedback.
Probably one of best videos out there. Its a little confusing on how people start remove that nut and bolt on the engine mount, but here this guy went straight to remove two bottom bolts first. Is there any particular reason why you did that?
Any know if this mount is the same as the ILX R20a own I know they look different but the engine is basically the same do they have the same bolt up pattern
Please help me, my Honda civic vibrates when accelerating suddenly or sometimes when I turn on the AC. (On stop)I already changed the 3 motor mounts and I don't know what the problem is.😢
Loosen the motor mount bolts, start the car and shift through the gears, then tighten the bolts back to spec. Also aftermarket mounts can cause vibration use oem link in description
On my 2015 civic lx when I'm stopped but in gear my car vibrates. After watching the videos at first I thought it could be the motor mounts. Then I saw a comment saying it vibrates and makes noise when accelerating if motor mounts are broken. The vibration goes away on mine. Also when its atleast in the low 40s outside it makes what sounds like a kind of grinding sound when I accelerate for only about 15 seconds or so then quiets down. Dont really want to take it to a dealership they'll tell me all kinds of things are wrong with it that aren't. I'm capable of fixing it myself I just dont know what the problems are.
@@MrRangerZr1 no cracks in rubber or metal I can see. Talking about the mount you show in this video. How else should I check them? My car has 80k miles on it.
Hey I have a 2015 civic exl with 68k miles, I bought it used when it had 50k miles for really cheap. But recently after 65k miles I noticed the vibration when idling is more pronounced, and when I put the car in drive with the E BRAKE on I pop the hood and can barely see the engine vibrating a tiny bit, however when I turn the ac on the vibration inside the car seems to smooth out but when I check in drive with E brake and AC on the engine shakes badly, and even hear some clunking , I know it’s the not the serpentine belt tensioner because I replaced that. Do you think it’s the engine mounts? The top one is somewhat pricey, $200+ for oem since I’ve heard using cheap mounts is a bad idea.
Hey I just changed the motor mount, do you have a transmission mount video? My car is rattling now as soon as I start the car, and I think it’s the transmission mount since the torque one was also replaced
Where can I find the bracket to the mount? The black bracket that connects the mount to the car. I ordered the engine mount and i need the bracket as well. I can’t find it anywhere online. Thank you.
Hey man I have the same vehicle and I just bought an engine mount em-7145, problem is it doesn’t come with the top part of the engine mount, where the 19mm screws are. So I thought of reusing my oem top half of the engine mount, but as I impact it with a 18mm it skips the stud. Having trouble here, can you tell me if that part of the mount is even removable?? Thanks man
@@MrRangerZr1 hey i got a mechanic to get the bolt out for me by welding another bolt over it. I still dont know the size of the bolt though, its a 17mm but seems like a different socket.. do you know what size that bolt is?
I know I’m a year late but need to replace my mount too. As the other guys said, mine doesn’t come with the aluminum top part either, also I’m not going with the dealership as the part is like 200 more expensive. Looked it up and the socket needed is an EP24 external torx
@MrRangerZr1 Thank you for this video! My 2015 LX manual with 25k miles does the dreaded shudder/wheel hop while taking off in first gear. Here is a video of my e-brake loaded first gear. ruclips.net/video/7Cemx3bLIqA/видео.html See how the mount torques like crazy? This is most likely the cause of my issues correct?
Crazy that mechanics charge up to $800 for this shit….. one guy literally tried to charge me close to $400 for the part and like $400 for the labor…. Looked online and you can buy the part for $75
*Parts and tools:*
OEM mount (CVT): amzn.to/2qn9zwW
Ratchet: amzn.to/2x0JINZ
Breaker bar: amzn.to/2CLoGJ4
Extensions: amzn.to/2QhJBX9
Socket set: amzn.to/2CEsSdS
Torque wrench: amzn.to/2GPm7Dr
Jack: amzn.to/3vl6wda
(optional) Impact wrench: amzn.to/2GUto4Q
#ad
How many motor mount has a Honda civic 2012
@@alfacardenas7451 3. Motor mount. Transmission and torque
I was going to ask if I bought a cheap one from o reilys you think the mount would cause problems to the automatic tensior where it would make noises while driving?
Hey what kind of jack do i need? I looked on the link you sent but nothing is available. 😞
@@jshcarmonakc just buy one at harbor freights it's 100 and it's called a low profile jack.
I owe u sooo much man...I did this today for the civic and it is quiet as a church mouse now....it was real bad yesterday and I really appreciate the how to vid...keep up the great work 🤘🏾
Posted 6 years ago, and still helps! Thanks! Very informative even without any narration
Thxs so much for this video. This was a great learning experience for my son and I on his car. We purchased the part from Parts geeks and a few tools from Harbor Freight and it saved us hundreds of dollars. As long as you have the where with all to accomplish a task like this; go for it! Get the tools if you don't have them and you'll be aight 👌 💯 🤪.
This video was worth a thousand bucks!!!
wow, mine just rusted off and needed to change this so badly. thanks a lot of posting man. truely appreciate it
Tysm. My motor mount was completely caved in. 🤦🏽♀️🥲 I’m a 25 year old woman with some simple car repairs under my belt. This one was a lil more involved but I still managed. Took me 3 hours only cus I struggled getting the mount to line up when putting the new one in, but I got it. The car runs like butter now. No vibrations, no clunks, it’s truly amazing. Ty for your knowledge especially the torque specs 💁🏽♀️ gonna try and replace the lower torque mount in a few weeks too but it’s a night and day difference just from replacing this one. 😇
I can't tell you how helpful and cost-saving your videos have been. Thank you so much. My question is about the torque settings at the end of this video. What you did here makes more sense to me. However, in my Haynes Repair Manual, it says that I should torque the two 17mm "mount-to-body" bolts to 69 lb.-ft, and the 19mm "mount-to-engine" nut and bolt to 47 lb.-ft. It doesn't seem to make sense to me that I should tighten the smaller bolts more than the larger ones. I just wanted to confirm that I should ignore the Haynes Manual and just stick to what you did here. Thanks again Mr.Ranger.
My info is straight from the factory shop manual
thankxso much for this video... can you make a video tutorial on how to change the transmission mounting 2012-2015 honda civic.
When they go bad do you feel a horrible vibration when you take off
Yes clunking noise as well
When you press on the gas, the engine jutters
Where is the driver side engine mount located?? Is it somewhere below the air filter housing
A good way to tell is drive at highway speed and accelerate quickly. You'll feel shaking and wobbling til you let off the throttle. Or while parked, put the car in drive and tap the throttle while keeping your other foot on the brake. Check for excessive engine movement.
@@kingeleven3820 yes. Below the air filter housing, ecu, battery, fuse box. All will be removed for easiest access.
Thank you for this video!! Just replaced this mount today and did the torque mount a few days ago when I did the oil change. I was quoted $1247 to replace all of them although I feel that’s reasonable I just don’t have the money.
That quote is outrageous
Reasonable??? dude the mounts cost 300$ max and it will take 20 minutes of your time
Great video. Only thing I want to point out which might or might not be important is you mixed up the torque specs for the bracket to engine bolts with the mount to body bolts. It's the other way around according to the Hanes manual
The numbers i provided are straight out of the honda shop manual
I have a Honda Civic LX 2012. The mechanic said I need to change the same exact engine mount as shown in this video with the washer fluid flask next to it. I am a bit confused though on the labelling. He said to get the right front motor mount in front of the passenger seat but he said its actually called the left engine motor mount when searching online for the part. is he correct?
Bilal Taj sitting from the driver’s side its going to be the right.
Anyway you can make that transmission mount video? Haven't seen anyone post one.
yes yes,, i wan to see the video too
How do you replace the transmission mount?
Sudmun Meah video coming soon
@@MrRangerZr1 did that video ever come out? After two years I still can't find it done on anyoneones channel oddly. Thanks in advance!
Exceptional work! My next project!
I can’t get the two bolts connecting the mount to the chassis to tighten all the way. They only go half way and now one is stuck? How do I fix this?
Sounds like you're cross threading, remove the bolt and try again.
Simple enough, thank you for the video!!!
Fantastic video. Why anti-seize on the bolts? I feel like it's the other way around and that you need Loctite thread lock on there, no? These parts experience a lot of vibration.
The bolts had corrosion on them so I used anti-seize. You can use threadlocker on it.
thank u so much had to raise my motor
For this vehicle, is there only 1 engine mount place?
Thanks for the video btw. Going to the dealership tom for a quote.. Not sure if this is something I should just do myself. Would need to buy some tools.
Found another video, its called the or transmission mount (if you're seated in the driver seat, it's on the left. This video is for the engine mount on the right.
Follow up question, how do you know your transmission mount is bad? You can visually inspect the right side engine mount, but what about the left?
There are few of them, 3 in total for this particular 2014 model in the video.
You can do them yourself.
Yes that is buried under the intake ducting. Basically if you feel excessive judders or clunks, time to check your motor mounts.
Awesome thank you. Would it be possibly to see other mounts to be change?
Your welcome! Yes of course!
@@MrRangerZr1 Did you put up the video for the other side?
John Nash coming soon stay tuned
Did it ever come out for the driver side?
what size are the bolts that mount the bracket to the mount and the body? I have a 12 lx mine mounts with one bolt to the body and one threaded stub and nut to the mount
Does this motor mount need a break in period? Its better at idle now but when pressing gas shakes quite alot after installing new one
Make sure to fully tighten the bolts after lowering the jack supporting the engine, don't tighten the bolts while the engine is jacked up. Also use OEM mounts.
@MrRangerZr1 ended up finding the oem mount. It just took a few tries cause dealer and autopart stores didn't have it.
Perfect video
How many pieces engine mounts in this car model?
3
Thank you for torque values
Is a torque wrench necessary to change the motor mounts?
Highly recommended
Excellent video! Thank you!
You should do a vid for the tranny mount
I had it filmed but lost all the footage...will record again.
Hi sir, do you have 9th generation honda civic transmission mount replacement video? Please share the video link. Thank you.
on the list stay tuned
If I'm replacing all 3 how should I do that? Follow this procedure, then replacing the transmission mount loosen the engine mount first, then hand tighten both and torque both?
If replacing all at the same time, hand tighten all mounts bolts, start the car and shift through the gears, then tighten down all mounts to spec.
You are awesome. Thank you for sharing. I really appreciate it.
Question - I just replaced the mount last night. One of the bolts, that attaches to the frame of the car, will not thread back in. Did you experience this? If yes, can you please let me know what you did to resolve the issue? Thank you in advance.
Can I replace just the mount or does it have to be the entire thing with the bracket?
Yung MXZV entire assembly
You can just replace the mount. But you'll need a shop for the e torx socket or have to buy special e torx socket. And they are hard to find.
Is this and the lower mount the only 2 mounts that would need to be checked and replaced or are there any others that I should check?
There is another mount underneath the airbox. That is the transmission mount.
Thanks so much!
I removed all the bolts/nuts, but some how I was not able to remove engine mount. Something is preventing the motor mount, may it is the top bolt bend slightly. Don`t know how to solve it.
Lift the motor a lil higher
@@MrRangerZr1 Ok, Thank you. I will try again.
How do I know if it needs replacing. My Honda has 177k on it. Should I change it as basic maintenance? Thx
It's not a maintenance thing, just replace it when it breaks/tears.
I just replaced the exact mount and noe my car vibrates like crazy any ideas?
Brian Ryerson loosen the bolts slightly and shift thorough the gears. Tighten back up.
Do I loosen both 17mm and both 19mm then go thru the gears and retighten? All without a jack?
Could you elaborate on the process of raising and lowering the car to fit the new mount on? Thanks!
The engine has to be supported when you remove the motor mount because the mounts are holding the engine in. When you remove or reinstall the mount, you jack up the engine a tiny bit, maybe less than few inches.
Thanks for the video bro
Hi, do u have video for the 3rd mounting replace? As I know there is 3 piece of engine mounting can replace rite?
It's coming, stay tuned...
Did you ever make this video?
I get really rough vibration when putting it on reverse and a little less on drive (specially at the front seats and dash) and also jutters when i press/release the gas pedal and just recently the air intake hose split at one of the inner joints. Are these symptoms of bad engine mounts?
Yes
Had the same problem. Saw that the air intake hose was split and was loosing compression but realized that was due to vibrations of the failed front right engine mount.
Hello, what type of bolt is securing the bracket to the transmission mount? Im having a hard time being able to separate the two units from each other to be able to stick the new mount in with the old bracket. Id really appreciate your feedback.
You don't need to remove that bolt
Probably one of best videos out there. Its a little confusing on how people start remove that nut and bolt on the engine mount, but here this guy went straight to remove two bottom bolts first. Is there any particular reason why you did that?
Just follow my video and you’ll be good lol
Any know if this mount is the same as the ILX R20a own I know they look different but the engine is basically the same do they have the same bolt up pattern
Most likely different
How many miles is on your civic? Do you replace them at a certain mileage
40k miles. When they go bad you change them. No certain mileage.
@@MrRangerZr1 Only 40k miles, you must of got a bad mount! I have 335k kms and never had to change a motor or transmission mount yet.
Please help me, my Honda civic vibrates when accelerating suddenly or sometimes when I turn on the AC. (On stop)I already changed the 3 motor mounts and I don't know what the problem is.😢
Loosen the motor mount bolts, start the car and shift through the gears, then tighten the bolts back to spec. Also aftermarket mounts can cause vibration use oem link in description
Thank you so much for this video
On my 2015 civic lx when I'm stopped but in gear my car vibrates. After watching the videos at first I thought it could be the motor mounts. Then I saw a comment saying it vibrates and makes noise when accelerating if motor mounts are broken. The vibration goes away on mine. Also when its atleast in the low 40s outside it makes what sounds like a kind of grinding sound when I accelerate for only about 15 seconds or so then quiets down. Dont really want to take it to a dealership they'll tell me all kinds of things are wrong with it that aren't. I'm capable of fixing it myself I just dont know what the problems are.
Colin Stubbs visually inspect the motor mounts.
@@MrRangerZr1 no cracks in rubber or metal I can see. Talking about the mount you show in this video. How else should I check them? My car has 80k miles on it.
Colin Stubbs check the other one underneath, the torque mount. I have the video on my channel.
Do you need to replace the bracket hooked on the mount? I noticed some sellers have the option to buy the mount with and without the top bracket.
It's one unit. Service manual says not to remove it.
Is that a 1/2 Or 3/8 Torque wrench
1/2"
Will the part you put on the link fit my 13 civic ex
yes
Hey I have a 2015 civic exl with 68k miles, I bought it used when it had 50k miles for really cheap. But recently after 65k miles I noticed the vibration when idling is more pronounced, and when I put the car in drive with the E BRAKE on I pop the hood and can barely see the engine vibrating a tiny bit, however when I turn the ac on the vibration inside the car seems to smooth out but when I check in drive with E brake and AC on the engine shakes badly, and even hear some clunking , I know it’s the not the serpentine belt tensioner because I replaced that. Do you think it’s the engine mounts? The top one is somewhat pricey, $200+ for oem since I’ve heard using cheap mounts is a bad idea.
Yes check the mounts. Use oem only.
Excellent. Perfect video
Hey I just changed the motor mount, do you have a transmission mount video? My car is rattling now as soon as I start the car, and I think it’s the transmission mount since the torque one was also replaced
It's on the list
perfect tutorial
Where can I find the bracket to the mount? The black bracket that connects the mount to the car. I ordered the engine mount and i need the bracket as well. I can’t find it anywhere online. Thank you.
part# 50625-TR0-A00 shop online or dealership
@@MrRangerZr1 thank you.
Can’t you just re use the old bracket
Hi is it one piece?? The one I bought is the black piece and I can’t remove the top bracket . Thank you in advance
It's one piece.
ok so i just changed all my mounts on my civic 13 but for some reason the right upper mount keeps sinking in i’ve already changed it 3 times
Are you using OEM parts? And did you do the final tightening with the jack removed
@@MrRangerZr1 no oem parts and yes i didn’t the final tie down after removal of jack
@@MrRangerZr1 i changed the one single mount 4 times finally the last one it’s been holding up good
Thank You!~
Do you know the size of those bolts you take off at the very beginning ? Holding the black brace bar from the car to the engine mount?
Part# 95701-10016-08
@@MrRangerZr1 are the same bolt for both? One to the car frame and one that is holding it to the engine mount?
Hey man I have the same vehicle and I just bought an engine mount em-7145, problem is it doesn’t come with the top part of the engine mount, where the 19mm screws are. So I thought of reusing my oem top half of the engine mount, but as I impact it with a 18mm it skips the stud. Having trouble here, can you tell me if that part of the mount is even removable?? Thanks man
It should come with that part and should be installed in and out.
@@MrRangerZr1 hey i got a mechanic to get the bolt out for me by welding another bolt over it. I still dont know the size of the bolt though, its a 17mm but seems like a different socket.. do you know what size that bolt is?
it's like a weird torx bolt
Running into the same issue here.. have you guys figured out the special tool to remove this bolt? I called Honda and they said they don't sell it
I know I’m a year late but need to replace my mount too. As the other guys said, mine doesn’t come with the aluminum top part either, also I’m not going with the dealership as the part is like 200 more expensive. Looked it up and the socket needed is an EP24 external torx
Ok dumb question cause Google won't give me the answer. Honda civics do they only have the one motor mount?
No there are 3
Awesome thank you! And is there a way to know which one needs replaced before you take them apart?
@@kapytan66 Visual inspection usually
Thank you sir!
How do you remove that bolt on top? What kind bolt is it?
Requires a special socket. Shop manual says you need to replace the whole mount if you remove that bolt.
@@MrRangerZr1 what size is it ?
I have 2014 lx where did you order that Boss?
Oppai Sama link in description
I was hoping the socket size for the torx-like bolt would be revealed, but nooh...!
Since my uncle past gota learn how do dis now
Buena ayuda gracias por compartir
Thank u I think I can do that
You can definitely do it
@MrRangerZr1 Thank you for this video! My 2015 LX manual with 25k miles does the dreaded shudder/wheel hop while taking off in first gear. Here is a video of my e-brake loaded first gear. ruclips.net/video/7Cemx3bLIqA/видео.html See how the mount torques like crazy? This is most likely the cause of my issues correct?
Wow, only 25k miles? Check the rest of the mounts too.
What do you mean first gear? If it has a cvt
@@V8orNoCar WTF dude you know they come in manual too right
@@MrRangerZr1 Turns out it was my intake boot ripped causing the shuddering in first gear.
Crazy that mechanics charge up to $800 for this shit….. one guy literally tried to charge me close to $400 for the part and like $400 for the labor…. Looked online and you can buy the part for $75
The mount you listed is for in the description 2014-2015 4 door sedan
For those who have 2012-2013 sedan, the part number is 50820-TR0-A81 !