It's never easy working on your back outside and when you have to lift a part up from underneath a vehicle and fit it on your own it can be a real nasty job. Great video young man!
Great video man! Thanks for sharing how you got proper backlash. It was good to hear that you actually can stack gaskets in order to get proper spacing. Way cool stuff. Get er choochin.
Another Warren video!!! The best mechanic on RUclips!!! I don't know if you sleep but I hope you get a little shut eye. Just finishing watching this video and can't wait for the next. God has blessed you in many ways and hope all is well with you and the family. I hope you'll be able to take a vacation with the family this summer but I do realize you have to make hay when the sun shines. Have a great week!!!
I think they put the filter after the relief, because it has a constant maximum flow. If you are using a tipper there is two much oil for the filter to handle on the down stroke.
I would think there is a control valve on the trailer that would port the oil to return when not in use. I think you said it was some kind of belt drive, so when the valve is activated the oil is ported to a Hydraulic motor, then to the return. Usually there is a relief valve on the pump, but I couldn't see one. So like you said, you need a relief valve on the truck, so if the pump was engaged without the hoses hooked up, it would not blow up the pump. Being that the flow is constant, I would think that a high flow filter in the return to the tank would be what you need there. Maybe its just me, but I would have removed pump first, then mount the PTO. Save that old back for another day. Great videos. Keep em comin.
How you keep all that knowledge stored in your head is amazing. Another great job Warren. You get asked to do a lot of retrofitting on those trucks don't you? Good luck with it!
I would suggest Filter on the return as you said, it's low pressure (just make sure it can handle the volume) and will filter the oil back to tank in the event of a failure in any part of the circuit. Can always go into bypass if required with the good quality filter/base.
We hear all that grunting and blowing and we try to help you but, there's nothing we can do but watch..Thanks for taking us alone with you..Watch that old back..See Ya Texas
I don’t know if you’ll see this Warren. But the problem you’ve mentioned in other videos, about go pros going out on ya. I was wondering if you had one of the water proof cases for it? Because you could only speculate, but i think your getting liquids down inside of them, and that might be why the sound is going out on ya. For example the lens and the actual case of the camera would have a small enough gap even if you can’t see it with the naked eye, it would be there. That is assuming you don’t have one or haven’t tried it before. All of your attachments will still work for it, just know that’s what people use for their motorcycles for example. Just figured i would pass it on, and if it works could save ya money
Hey Warren, love your vids, but we are back to fading sound again. Have a good week! Im about 3 and a half hrs. north of you ,around Elmira, Or. Todd the retired trucker.
I use larger pieces of scrap cardboard, Yes large rocks chew thru and oil soaks. Sometimes only get one job out of a piece. Easier to slide on with no splinters is a big advantage.
How does a Western Star compare in quality and durability to a Volvo? Also that's not a Chihuahua barking in the video, that sounds more like a shih tzu, at least to me
G'day Warren, I've done hundreds of truck hydraulic setups, if you need any info/photos shoot me an email: subarusti_@hotmail.com In an ideal world, you'd run 2 filters, one of feed and one on return. Most people run a single filter due to cost and it's always on the return back to tank, especially on tipper setups. Tipper wants 2500psi relief, 1'' feed and return lines and 1 1/4'' suction for pump. installing PTO without pump is way easier too, those PTOs are damn heavy when ya got not alot of room to move. We always only ran one thick and one thin gasket, grease them together and stick to bottom of housing then lift PTO for easiest install.
Wouldn’t cost to much to dig a pit to make working under them truck easier on your back and shoulders, I’m sure your wife would appreciate not having grit and gravel in the washing machine as well.
Watching you work takes me back in time. Life time driving tractors (orchards) and trucks (everything everywhere). I was a driver who always respected and appreciated mechanics. Now that I'm old, wore out and tore up, i really do enjoy dreaming back in time while sitting in my rocker. And that is OK. Someday, hopefully, you will get there too. God willing. Thanks for sharing what you do. I always look forward to your videos.
Excellent video Warren. I felt every stone on your back fighting with that PTO. How about digging a walk-in inspection pit so you do not have to be a contortionist?
you are a pro mechanic. the same level as rocky...the way you have to fight that metal monster and roll around on the dirt, if it were up to me you would have a coach with a pale of water a sponge to wipe your face, and a towel to dry it..and rub your shoulders saying"ok rock you ready for your next job you can get uhm" thanks for showing up to work every day!!!
Holy cow I would’ve split that PTO from the pump , I was wondering why you took the other cover off , that’s how i usually do backlash is take the slave off of the PTO
How is the motor grader doing? We always ran the filters on the return. If running the filter on the bypass then only bypass oil is filtered. Plus on a external filter I would rather filter lower pressure in case of a rupture.
Western Truck guy! I like the vids and commentary. I run a small auto repair and small engines etc outfit...not the point. When i have bolts to hold up or are just awkward...I'll put a rubber band around the threads to hold em, them once I get the threads started cut the band and pull it out. Works for keeping bolts arranged in a unit during disassembly too.
When you said "I got to get my knee in the right place" I fell out remembering how many times I was forced to say those same damn words. Man do cause me flash-backs.
Watched a video of the owner peeling off the decals of the company he used to work for, and put on his own name. Soon as I saw his location, I though of you.
Warren another good video. Invest in all thread different sizes and use that on heavy parts to make it easier on your body. Keep safe you and your family.
Just a quick comment not really a mechanical one. I notice these days many people use the word “ way” incorrectly. Way this and way that. Way more than, instead of far more or much more, etc. I suppose that goes along with the failure of our language. He went that way or that is the way this is done, for example.
How to keep oil from running out of a tank when you disconnect a line with no shut off. Saw that done by using a shop vacuum. Padded the hose with cloth strips, stuck in the top of tank and turned vacuum on. Created enough pull to hold the oil in tank, no loss when line disconnected.
I always pulled the shift cover on the PTO to check the gear lash. It also allowed you to see the gear alignment. Just a way to be sure you had the right PTO.
Hay I have a question, I have a war out old Linkbelt excavator, and it’s leaky, can I use motor oil for hydraulic oil, ??? My thinking is 30 weight straight ,will be thinker and stay in the rams cylinders longer ??? Thanks,.
Always hated pulling or installing the stupid things. For their size, they're heavy, awkward and you don't get much room while laying under it. And they make clutch swaps even more "fun".
4 года назад
Must be in the 100s down there eh Warren??? Still flooding and monsoon rains in BC , oh well it's good for the forest , that looks like a level 9.8 swear job so many it's time for some F bombs lol
Another awsome Video i really enjoy watching your Videos i like it after a hard day at work a warren lane movie nothing better just watching and lerning from the master him self i try become like you warren
in 1991 had a 1989 Kenworth that Eaton put those water cooled oil coolers on, it failed and dumped all the coolant into the transmission and it looked like that oil, prefer the oil to air coolers mounted in front of the radiator
Hey Warren did you hear about the little kid that came home and asked his dad, what a gynecologist does, his dad paused for a minute and said he reads lips
![[Limbus Company - Teaser] Season5 - Oblivion](http://i.ytimg.com/vi/8anKuEeZLeI/mqdefault.jpg)
Hey that’s my truck!!! It’s always a pleasure working with Warren! I’ll have to get a concrete slab for him to work on
It's never easy working on your back outside and when you have to lift a part up from underneath a vehicle and fit it on your own it can be a real nasty job. Great video young man!
Great video man! Thanks for sharing how you got proper backlash. It was good to hear that you actually can stack gaskets in order to get proper spacing. Way cool stuff. Get er choochin.
Another Warren video!!! The best mechanic on RUclips!!!
I don't know if you sleep but I hope you get a little shut eye.
Just finishing watching this video and can't wait for the next.
God has blessed you in many ways and hope all is well with you and the family.
I hope you'll be able to take a vacation with the family this summer but I do realize you have to make hay when the sun shines. Have a great week!!!
I think they put the filter after the relief, because it has a constant maximum flow. If you are using a tipper there is two much oil for the filter to handle on the down stroke.
Filter goes on the return side after the coupler bar return side hose before going to the tank
I would think there is a control valve on the trailer that would port the oil to return when not in use. I think you said it was some kind of belt drive, so when the valve is activated the oil is ported to a Hydraulic motor, then to the return. Usually there is a relief valve on the pump, but I couldn't see one. So like you said, you need a relief valve on the truck, so if the pump was engaged without the hoses hooked up, it would not blow up the pump. Being that the flow is constant, I would think that a high flow filter in the return to the tank would be what you need there. Maybe its just me, but I would have removed pump first, then mount the PTO. Save that old back for another day. Great videos. Keep em comin.
How you keep all that knowledge stored in your head is amazing. Another great job Warren. You get asked to do a lot of retrofitting on those trucks don't you? Good luck with it!
That oil looked like liquid caramel. lol
If you haven't done so already, don't forget the mount bracket on the pump to trans. The PTO case will crack without one. Great job!
Thanks for sharing another great job Warren. Have a Great week bud.
Your a better man than I am, I could not have installed that pto like you did.
I would suggest Filter on the return as you said, it's low pressure (just make sure it can handle the volume) and will filter the oil back to tank in the event of a failure in any part of the circuit. Can always go into bypass if required with the good quality filter/base.
Hope you had a happy 4th! God Bless
We hear all that grunting and blowing and we try to help you but, there's nothing we can do but watch..Thanks for taking us alone with you..Watch that old back..See Ya Texas
Great to see more great informational videos and where's your helper Blake
Glad to see another sage video! Thank you.
I don’t know if you’ll see this Warren. But the problem you’ve mentioned in other videos, about go pros going out on ya. I was wondering if you had one of the water proof cases for it? Because you could only speculate, but i think your getting liquids down inside of them, and that might be why the sound is going out on ya. For example the lens and the actual case of the camera would have a small enough gap even if you can’t see it with the naked eye, it would be there. That is assuming you don’t have one or haven’t tried it before. All of your attachments will still work for it, just know that’s what people use for their motorcycles for example. Just figured i would pass it on, and if it works could save ya money
Hey Warren, love your vids, but we are back to fading sound again. Have a good week! Im about 3 and a half hrs. north of you ,around Elmira, Or. Todd the retired trucker.
Friday night, Guinness and Warren, life's good!
Warren. You are one hard working man.
Nice work as always
Warren you should take more care of your back seeing you lie down on hardcore especially with your back history, take care my friend.
Good job like yours did my brother
Is that a 15speed transmisión?
You should train Daisy to hand you tools. 🐶
@@harley2die4 Can't be true. She shows ambition.
Is the spec 20 thou or 6-12 thou?
On my 2001 peterbilt, 9th& 10th gear grind while in gear ,is this something gotta do with the pto pump?
MGBYAAA 😎 Good work
Why is there ALWAYS one?
That job is bad enough but laying on large crushed rock wow! You should carry a small sheet of plywood with you to these jobs.
I use larger pieces of scrap cardboard, Yes large rocks chew thru and oil soaks. Sometimes only get one job out of a piece.
Easier to slide on with no splinters is a big advantage.
Evening Warren
Was the output shaft on the transmission leaking? Looks like you're busy as a one legged man in a kicking contest .🤔😉
Filters on suctioning side...dump return will blow the gasket right out...js
How does a Western Star compare in quality and durability to a Volvo? Also that's not a Chihuahua barking in the video, that sounds more like a shih tzu, at least to me
Olympic sport: truck repair crawling
That is going to be one noisy PTO. Way too much backlash. It should be between 6-12 thousands.
G'day Warren,
I've done hundreds of truck hydraulic setups, if you need any info/photos shoot me an email: subarusti_@hotmail.com
In an ideal world, you'd run 2 filters, one of feed and one on return. Most people run a single filter due to cost and it's always on the return back to tank, especially on tipper setups.
Tipper wants 2500psi relief, 1'' feed and return lines and 1 1/4'' suction for pump.
installing PTO without pump is way easier too, those PTOs are damn heavy when ya got not alot of room to move.
We always only ran one thick and one thin gasket, grease them together and stick to bottom of housing then lift PTO for easiest install.
👍
👍🇦🇺👀
Gday again mate
Wouldn’t cost to much to dig a pit to make working under them truck easier on your back and shoulders, I’m sure your wife would appreciate not having grit and gravel in the washing machine as well.
That’s what sucks about being a mechanic. Laying on the sharp rocks with dirt and transmission fluid dripping all over ya. Yuck
Watching you work takes me back in time. Life time driving tractors (orchards) and trucks (everything everywhere).
I was a driver who always respected and appreciated mechanics.
Now that I'm old, wore out and tore up, i really do enjoy dreaming back in time while sitting in my rocker.
And that is OK. Someday, hopefully, you will get there too. God willing.
Thanks for sharing what you do. I always look forward to your videos.
Good to see another great and interesting video Warren
I think we can all agree that this title is installing a permanent oil leak😂
another job another day as long as they keep coming things will be ok
I know a 13 speed held 5 gallons of oil in a 78 GMC Brigadier 318 noisy bastard 😂😂😂
Your vids sure end suddenly Warren! I like em thou.
Excellent video Warren. I felt every stone on your back fighting with that PTO. How about digging a walk-in inspection pit so you do not have to be a contortionist?
Great to see you back you sound a lot happier now hope you have had a good break keep up the good work
glad your back
you are a pro mechanic. the same level as rocky...the way you have to fight that metal monster and roll around on the dirt, if it were up to me you would have a coach with a pale of water a sponge to wipe your face, and a towel to dry it..and rub your shoulders saying"ok rock you ready for your next job you can get uhm" thanks for showing up to work every day!!!
Holy cow I would’ve split that PTO from the pump , I was wondering why you took the other cover off , that’s how i usually do backlash is take the slave off of the PTO
How is the motor grader doing?
We always ran the filters on the return. If running the filter on the bypass then only bypass oil is filtered. Plus on a external filter I would rather filter lower pressure in case of a rupture.
👍..
PTO work is NEVER fun, unless it's on one of my scale RC trucks!
Good Mechanics are highly appreciated
Glad you had a rest. Good to see you busy as always. Stay safe and healthy 🇬🇧
Western Truck guy! I like the vids and commentary. I run a small auto repair and small engines etc outfit...not the point. When i have bolts to hold up or are just awkward...I'll put a rubber band around the threads to hold em, them once I get the threads started cut the band and pull it out. Works for keeping bolts arranged in a unit during disassembly too.
Would you be able to take time in your busy day to explain all the gages and switch functions ,on the dash of say the western Star? Fredericton N.B.
9/16? Great! That's 14mm in my world!
Carry on!
15mm !
Great to see
When you said "I got to get my knee in the right place" I fell out remembering how many times I was forced to say those same damn words. Man do cause me flash-backs.
Warren I believe the specs are 06 to 012 thousandths
On a 6 bolt
.018 - that one is gonna rattle a little.
It will tighten up more wen all the bolts get torqued down
I can certainly identify with the gymnastic twists and turns needed to repair stuff underneath vehicles.
Part 1? That's a bad sign. Jk. Really appreciate these videos
Watched a video of the owner peeling off the decals of the company he used to work for, and put on his own name. Soon as I saw his location, I though of you.
ACatKrom I thought the exact thing when I saw the door. That’s pretty cool
Warren another good video. Invest in all thread different sizes and use that on heavy parts to make it easier on your body. Keep safe you and your family.
Thank you for the great videos.... Wish our hgv's were as good looking as your big rigs... 🇬🇧👍👍
Just a quick comment not really a mechanical one. I notice these days many people use the word “ way” incorrectly. Way this and way that. Way more than, instead of far more or much more, etc. I suppose that goes along with the failure of our language. He went that way or that is the way this is done, for example.
I means to write backwards,lolo, I did not notice that , sob sob , nice sob, , good SOB, kool thanks y’all BigAl California.
Got freightliner with Crane/pto. When i shut down electric switch pump still stays on. What do you think problem is?
How to keep oil from running out of a tank when you disconnect a line with no shut off. Saw that done by using a shop vacuum. Padded the hose with cloth strips, stuck in the top of tank and turned vacuum on. Created enough pull to hold the oil in tank, no loss when line disconnected.
Genius idea.
I'll do the same when welding a Diesel tank that has fuel in it. Never thought to do it with a hydraulic tank though.
Hey Wats up keep up the good work I like Ur videos I'm from guyana
Excellent video well done Warren thanks for your time 👍 😎
Great video
i used to install many ptos wouldn't it be easier to install pro without the hydralic pump on it?
I always pulled the shift cover on the PTO to check the gear lash. It also allowed you to see the gear alignment. Just a way to be sure you had the right PTO.
Very good point. I've seen a gearbox wrecked with the right PTO but fitted with no shims, it broke the teeth off the drive gear.
Porque no prende el pto de los botones de volante
Check oil consistency with finger... wipe on pants
backlash is .006 to .012. you have way to much...
How much it’s the cost for install pto?
man I was tired from watchn you hold that up wit yer knew lol
good vid warren
How is/are your knees feeling? What ended up bringing you relief from the pain?
Installation of air system pto Eton 8 speed
What’s the cost to install a pto system?
Great job
Thanks for the video @
What is oil transmision?
Hay I have a question, I have a war out old Linkbelt excavator, and it’s leaky, can I use motor oil for hydraulic oil, ??? My thinking is 30 weight straight ,will be thinker and stay in the rams cylinders longer ??? Thanks,.
Always hated pulling or installing the stupid things. For their size, they're heavy, awkward and you don't get much room while laying under it. And they make clutch swaps even more "fun".
Must be in the 100s down there eh Warren??? Still flooding and monsoon rains in BC , oh well it's good for the forest , that looks like a level 9.8 swear job so many it's time for some F bombs lol
Another awsome Video i really enjoy watching your Videos i like it after a hard day at work a warren lane movie nothing better just watching and lerning from the master him self i try become like you warren
in 1991 had a 1989 Kenworth that Eaton put those water cooled oil coolers on, it failed and dumped all the coolant into the transmission and it looked like that oil, prefer the oil to air coolers mounted in front of the radiator
how come you dont have your son helping or the other boy helping you !!!!!!!!!!!!!!!!!
Hey Warren did you hear about the little kid that came home and asked his dad, what a gynecologist does, his dad paused for a minute and said he reads lips
I like that white truck with the tool box u should do a video on that been considering a utility bed or something
Hay it’s on dackards, lolol you did notice that did you , thanks BigAl California.
Milwaukee just came out with a impact ratchet with 220 foot pounds. 2564-20
I like trucks
Warren, the sound keeps going in and out, are you having camera problems?
Still need some kinda strap or flap on that phone pocket. Lol