I must admit, most of this is still foreign language to me. I'm 74 years old with a high school education. I have become very interested in learning how all this stuff works. I bought an Arduino kit but then I got high centered and have not gone any further. I need to find a place where I can learn and ask questions. I can't tell you how much I appreciate you doing these videos. I only wish I could absorb the information as fast as you talk. I will be going back and re-watching them all. I also need to get the stuff to build some of what you have shown. I got interested because I want to build some sort of CNC woodworking machines. Thanks again and please keep up the great work.
I'm back again bro.. I watched another video from another content creator with this subject and he went deep into the electronics side of things which is so hard to find others doing the same. Most ppl gloss over the electronics but what they don't realise is this is the part most of us newbies really struggle with and would very much appreciate u guys help out her with some indepth videos on the set up and wiring and not just show a diagram and sdpeed up the video to 25X's normal speed.. LMAO.. I hope u don't take my comment the wrong way my dude but it needs to be said now and again
Am building a pen plotter, I already bought the steppers, dude you are my hero, it's a blessing I followed your channel even before I started thinking about building a cnc.
John, Great video! Not only am I interested in virtually 99% of the content of your videos, your enthusiasm is very contagious! Machining, Tormach, CNC, Arduinos, control... I love it all, and your presentation style is perfect for us home shop machinists and tinkerers. I see 100K in your near future John. Good luck and keep it up! To those reading this who are new to the NYC CNC Channel; I've been watching John's videos for several years. You owe it to yourself to see where he began in a small apartment in New York City. I suggest that you go back and watch all of his previous videos to really understand how he became what you see in his current videos from Ohio. As a simple home shop kind of guy with many of the same interests as John, I have thoroughly enjoyed watching his growth and learning. In the process I have learned much more than I ever thought possible. But hold on, it's quite a fun ride! Disclaimer: I have never met or spoken to John personally. I just admire what he's accomplished and demonstrated what is possible.
I just woke up and watched this with my first brew of the day and even in my John Hurt waking up in Alien state I could follow all of this. Beautifully explained John and your enthusiasm is infectious!
thank you John! your friends from Yachiyo here.. i have been interested in Audrino for years but never broke the ice and bought one. But after this video im doing it! lol
If there is one video out there that can convince someone that it is not hard to build a cnc for hobby use, it is this one. I like the fact that the cost of the individual parts is spelled out - as well as the limitations one has with these parts.
I work as a software engineer, but mechatronics has always fascinated me. I started hobby electronics a while back, now I'm working on stepper motors. I just took apart my old printer and salvaged quite a bit of hardware :) I'm going to create a candy machine and use the printer / scanner body :D
Cant wait for more videos. Been thinking about making a CNC for a while to learn and to use, after putting hours of research into it over the past few months to make sure I dont make a mistake with my tiny airtight student budget I stumble on to your videos where you answer questions about technical and not so technical aspects, make it on a budget and maintain a level of quality. So pumped for more. Thank-you for these and I request a quick DIY CNC lathe once this project is complete!!
Great work bro, I am a final year mechanical student, when I was in my first year I used to think that I will make such type of machine but our education is very poor student goes to collage just to complete the engineering graduation, and they do not know any think, including me, but we can't do any thing, hope I will be making this type of machine in future, definitely inspiring video,thank you
I couldn't count the number of times I said to myself (out loud), "This is awesome. This is sooo awesome." Thank you AGAIN for posting a continuation video on this subject. Thanks for walking through the g-code as well. That cleared up so many questions I had. I'm going to check out your site right now. I feel like I just have to buy something from you or if you have a donation arrangement, send you something so you can continue these projects. You've done such an excellent job providing content and helping me learn it's the least I can do!
NYC CNC Hi John, thanks again for always replying! I really wish I could make it to the open house. I'm in Michigan, North of Detroit and only but about 5 hours away. Since I can't make it though due to scheduling to the open house, I'd like to maybe help out in some way. I'll shoot you an email with what I had in mind. :)
Your videos are awesome man. A viewer can really follow along and learn as you show and teach your concepts. Your enthusiasm is contagious. Thanks so much for making them. Hats off to you.
This is the first video i watch in your series, but gosh - You are my new hero, for explaining in an easy way... I will keep track of you in the future..... THX a lot..
That is a great project! I retired a year ago after 40 years with GE as a Tool and Die Maker. I am getting started with Arduino and plan to use them for projects in my work shop. That machine you built may be on my list of things to work on. Keep up the good work and thanks for the video!
Love this video, just finished my very first Cnc router, based on grbl and arduino. It can mill 47x47cm, and cost less than 100 dollars. I would never been able too put this togheter if it wasent for people på RUclips like you. Actually it was looking at one of your videos that got me inn too it, and i think so far that its been a great Journey. So thanks again for putting your effort in the videos you make☺
+NYC CNC Hi thanks for response☺ for now i have only milled some wood pieces for the enclosure for the electronics too the Cnc, still try too learn difrent software, and fix all the "baby" issues that the machine got☺ this machine was just for test purposes, too see if i could design and make it. So next project will be too make a stronger one for aluminium. ☺ im not into any craftman ship really, i just wanted too see if i could make it ☺ looking forward for your upcomming videos☺
i see a lot of passion in your videos , i am sure yo already contribute a lot to Human Kind. your videos and techniques helped me as inputs for lot of my work. Thanks a lot
This was great, I really appreciate the sources where you get this stuff. Also, your enthusiasm is infectious, now I want a CNC mill and I don't know why.
I'm building something similar in my mechanical engineering class (as a additional project) but I'm so into this kind of stuff, that I'm definetly going to build another CNC Machine at home.
man i have to say it, that was a pretty good video, what you just did will inspire other like me to change this world, I also worked with KUKAs , Chirones, Pumas, and my favorite, trumpf laser, few years ago and I know what it feels to work with those machines or just watch them work and then build something like that. good job man
I'm a boilermaker and I have allways been interested in CNC ,your right that this is an awesome era to be able to do this but it looks a bit over my head,great video,good job man.
Amazing! You're the best! After watching countless hours of videos on RUclips about DYI CNC and how to get it to work, I still had some questions, and you cover it all in an easy understandable way! The SW/HW calibration was driving me nuts because I didn't see anything about it! Thank you! And keep it up!
a common fix for the racking is to drive that axis on both side of the gantry, either with two stepper or a single stepper and a drive shaft at each end
A massive thank you John for all the hardwork and inspiration. I'm new to DIY CNC and I'm planning to build a CNC Plasma table with a 1200mm x 1200mm work area. These videos have been a huge help and I've just watched this one for the 3rd time, while configuring my Arduino Uno with a CNC Shield V3.0 and 4 Nema 24 motors. I'm also hoping to document the entire process for other noobs like me who have littled to no experience. Should be a good ride I hope :)
This is great! I am currently a mechanical engineering student and when I graduate I want to get into machining too because I feel they go hand to hand in the packaging industry (the area I want to work in). I am looking into purchasing an easy item like this to get introduced to cnc equipment!
Been watching you for a while now, I had a really great time watching this episode. I'm still in my noob days of CNC, I'm converting a Sieg X2 for my first CNC machine soon, so this low cost, basic and beginner friendly video really connected with me and why I'm so excited about CNC machines.
Starting to plan out how I'm going to build one of these for personal projects. Thanks for the videos! It's funny you mention COSI because I live in Columbus and can see the COSI building right now through the window at work!
As always, a brillant video. So great to see some one excited about work like this. I am watching the video as I unpack new tools that came in the post that I need to continue building my own CNC machine. It was your video on Stepper motors that got me started on building my own CNC. I alway love seeing the email that there is another NYC CNC video to watch.
I really like that you put parts and other things as links in the description it is something that will keep me coming back to watch your videos because it can be very helpful. thanks!
Excellent video, excellent project and a good alternative to go through a DIY CNC......but what I like most is the enthusiasm given in this video presentation.
As usual , you have a fantastic segment on this material. It is so well explained for starters and a great refresher for those with more experience. No matter how often I see this I still am amazed with seeing CNCs control a extruder or machine bit as with remote controls .. and now we use them to control robots on mars ..go figure ! Amazing world we live
Loved your video. I would offer a tip for working with belts. Just multiply the number of teeth by the pitch. If you are using a MXL belt (.080 pitch) and a 20 tooth pulley you will move your axis .08 X 20 = 1.600 inches in one revolution.
Thanks for posting this and detailing your work like this. There is a LOT of great info here. I just want to point out that on the linear motion calculation from revolutions, you aren't concerned with diameters and circumferences, since this actually functions as a gear type of drive. The only sensible way to make this "rough" calculation is to take the number of teeth in the timing GEAR (not really a pulley) and compare that to the belt tooth pitch. Since the belt is flexible, this calculation only gives a ball park, and of course the only accurate way to extrapolate is to measure total travel over the maximum number of revolutions available in the travel, and then also to measure each revolution and any other subdivision of steps that you are willing to invest in characterizing the linearity of your machine! This type of drive is only "practical" for a cutting machine that is making cosmetic items or blanks that will need further precision machine work to be used in a machine fit machine part application.
Watching you do this makes me want to change jobs -- I work in software but I so want to build machines like this. Very inspirational! I bet you could use this as an engraver -- have it do the ipsic cardboard lines on your targets to save tormach time... another machine in the production line.
Awesome video and project, very nicely explained even for a neophyte like me! +1pts for your perfect language and joviality!... You've just earned an follower!
I have a professional flatboard CNC-Cutter at home. To fix the vibrations of your pen you need to build a toolholder that push your pencil to the drawing surface. If you you need fine-adjustment, just add a tension-screw to the top of the springholder. And if you replace the marker for a ballpoint pen you will get even better results, maybe already without spring. If you want to continue on building a drawing machine, you can lift your pen with an electromagnet that pushs up the flexible part of the pen (under the spring).
Columbus represent! COSI is awesome on days when it's not overrun with rowdy kids that aren't being watched. They have nights that are "adults only" with themes like "puzzles" or "crime investigation" and those are great.
Excellent job! I love the diy aspect of this project. I am also currently running a GRBL based home made cnc machine. I love the price and the ease of use of these little devices. Thanks for putting out great videos.
I actually use it for a little bit of everything. Recently I have been doing some v-carving with some 1/8" carbide 45 degree v-bits. The things that can be done with a CNC machine truly are amazing and GRBL has paved the way for a cost effective electronics setup. I really look forward to your future videos on this subject.
Just various kinds of wood so far, I have been thinking about getting some brass to try but I'm not sure about the rigidity of my machine to cut any harder materials.
I went to COSI also! I saw the same robotic arm there. I also saw several of the 3D printers a few years ago project and built a reprap (or two). We do live in a fantastic age! Thanks!
It has been 1 month short of a year, so I'm not terribly surprised at this. I just went through your bill of materials for the "DIY Cheap Arduino CNC Machine - complete..., Jan 6, 2015" that you recommended from eBay and got a lot of 404 errors, Page not Found. Again, I'm not terribly surprised. It does point out one thing that you might consider for the future, however, is to put enough description of the items that you are referencing that we can find them from another vendor or another source on eBay. I really didn't think that the machine would work for what I want (to cut wood) but the learning experience that you gained from it seemed worth whatever it cost. I thought that I could benefit from it as well. I have the Spark Fun Inventors Kit, that has a robot and Sparkfun's version of the Arduino and shield. That is a great learning experience as well. I want my end result to be a 2' x 3' 2.5-axis cnc router. I really like your videos. I just recently subscribed. Often the instructions on youtube are long and drawn-out, but yours are very concise, you don't say Um, Er, Ah, between every word, well articulated, and it appears that you actually enjoy what you are explaining. The enthusiasm is contagious. Very well done.
cool stuff, I working on a CNC welding machine (3 axle) this is how I thought it should run, in the coming weeks I want to build a little demo version. Great inspiring video's
Thanks a lot! I am SOO glad that I found your channel. I want to do some prototyping and was all about to purchase a 3+2 CNC mill for a pretty hefty price as I did not find a decent step through for DIY. Part 1 and 2 of your vid answered all my questions :) Cheers and keep on milling!
first of all. I would like to thank you for sharing this .it's my favourite learning. but I'm a taxi driver. no time to do it myself. but still learning about this lesson.
Trippy...I'm so lost when it comes to all of the programming aspect of industry and gadget tech that I am glad you break things down for us dinosaurs, cool video series! Aloha...Chuck
NYC CNC Yessir, that's the idea I hope with most all of you there machinists, to teach "us ignorants" what a muffler bearing is, he he! I must admit that I did enjoy being "in the know" at least with what a dial gauge and thousandth of an inch was :D
Hi John, Not exactly my cup of tea but I like the simple progressive approach, I like to learn new stuff, who knows, maybe one day I'll dream arduino. Keep on the great work, you are a pretty good teacher...! Pierre
Thanks so much for this simple "My First CNC" concept. I was thinking about the Z-axis and it occurred to me that there are two types. The usual z-axis would be analog. The tool travels through a precise range to give a third dimension with the precision of the X and Y. But this setup just isn't rigid enough to put a cutter in (right?) The second type would be digital. It's either up or down. On or off. And for that there's almost nothing complex required. On the pen setup in the video I'd add a cheap $2 servo to the pen holder and attach an arm from it to the pen (probably with a light spring for pressure). Now you can lift the pen off the page almost for free! This would work for me as I just need a blade in there to cut icing for cakes. I need knife-up and knife-down. (Though how to cut vertically without a spinning router type setup into 2mm of icing is a challenge. Any ideas?) I feel a project coming on!
You are a smart man.. I have no experience whatsoever but have great interest in learning . I have a home project I am wanting to accomplish. Not wanting to depend on a machine shop but would love to learn from ground zero.. building the cnc machine and learn programming gcode
Hi John You could very easily add a small RC Servo or even a little Solenoid to the top of the pen that would lift the pen off of the paper during rapid travels. Great video. Willy
I have wanted to build something similar for my self but have felt that the price and knowledge step has been to great. Looking forward to the follow ups and it is itching in my fingers to buy those parts.
NYC CNC ha! you know what I mean ;) A lot a guys out there just post the (highly edited) successes, and it's obvious they have taken several cuts (movie talk, not machining talk) to get there, it's obvious on yours that this is genuine, you look happy and (sometimes) surprised when things work first time, which I think people appreciate :) Did you ever sort out the wiring on that other project like I suggested by the way?? ;)
What a great video! I'm just getting into CAD/CAM and this is a really great project. I'm only hoping I can do this on a Mac as I don't have a PC. Looking forward to more of this great stuff.
Somehow I missed this episode. Hmm....mustve gone by my feed fast. I try to watch every new episode. Oh well. Im here now. Very interested in this stuff. Ive wanted to do this for quite a while. Its time.
Thank you so much. This video was the missing link for me in my DIY CNC. So many other designs are clunky and error prone. This is what I have been looking for. I'm going to expand into a Z axis. I look forward to seeing what you cobble together too.
With pulleys using a timing belt or linear motion belt (looks like G2 belt), do not calculate the travel by the pulley OD times pi, you get whatever you want as a result. Just check the tooth pitch of your belt and multiply by the tooth count of your pulley. Your machine would have 16 teeth pulleys and GT2 belt which has 2 mm pitch, so 16 * 2 mm = 32 mm per revolution of the stepper.
One easy way to solve the rigidity in the x axis would be to add another belt to the back rail on two idlers. Connect the two belts with another shorter belt on the left side between the existing idlers. This will keep extra radial load off the shaft of the stepper and should firm up the back end of the assembly.
mostly welders and some assembly units in the car industry. But i have started to look in to arm and tracked for a hobby. the cnc router would help in parts construction. I was all so looking at a cnc lathe mill brill. Any good ideas?
Hi. A suggestion for a video related to the subject of DIY CNC. A video on linear rail alignment techniques. Making them parallel, making them flat (I've been reading a fair bit about bedding on epoxy for this) e.t.c., making sure to axis are perpendicular. Thanks for the videos you have done. Good to learn stuff of off someone who has a similar approach to myself.
Should build a lathe, milling machine, 3D printer now. lol. lathe and mill might be different build. But it would still be nice to see a small scale model for garage building based on CNC. Great work !. Im inspired to build one now.
because of your videos i just bought a 3 axis 3040. if i told you what i got it for youd never believe it in a million years. but at the end of the build it will be a 5 axis for just about $250. well maybe 300 ill have to purchase a 5 axis controller. i have been 3d modeling since 1991 so that part of fusion 360 was easy but learning the ins and outs of g code is the next step
I must admit, most of this is still foreign language to me. I'm 74 years old with a high school education. I have become very interested in learning how all this stuff works. I bought an Arduino kit but then I got high centered and have not gone any further. I need to find a place where I can learn and ask questions. I can't tell you how much I appreciate you doing these videos. I only wish I could absorb the information as fast as you talk. I will be going back and re-watching them all. I also need to get the stuff to build some of what you have shown. I got interested because I want to build some sort of CNC woodworking machines. Thanks again and please keep up the great work.
I'm back again bro.. I watched another video from another content creator with this subject and he went deep into the electronics side of things which is so hard to find others doing the same. Most ppl gloss over the electronics but what they don't realise is this is the part most of us newbies really struggle with and would very much appreciate u guys help out her with some indepth videos on the set up and wiring and not just show a diagram and sdpeed up the video to 25X's normal speed.. LMAO.. I hope u don't take my comment the wrong way my dude but it needs to be said now and again
Am building a pen plotter, I already bought the steppers, dude you are my hero, it's a blessing I followed your channel even before I started thinking about building a cnc.
John, Great video! Not only am I interested in virtually 99% of the content of your videos, your enthusiasm is very contagious! Machining, Tormach, CNC, Arduinos, control... I love it all, and your presentation style is perfect for us home shop machinists and tinkerers.
I see 100K in your near future John. Good luck and keep it up!
To those reading this who are new to the NYC CNC Channel; I've been watching John's videos for several years. You owe it to yourself to see where he began in a small apartment in New York City. I suggest that you go back and watch all of his previous videos to really understand how he became what you see in his current videos from Ohio. As a simple home shop kind of guy with many of the same interests as John, I have thoroughly enjoyed watching his growth and learning. In the process I have learned much more than I ever thought possible. But hold on, it's quite a fun ride!
Disclaimer: I have never met or spoken to John personally. I just admire what he's accomplished and demonstrated what is possible.
I just woke up and watched this with my first brew of the day and even in my John Hurt waking up in Alien state I could follow all of this. Beautifully explained John and your enthusiasm is infectious!
thank you John! your friends from Yachiyo here.. i have been interested in Audrino for years but never broke the ice and bought one. But after this video im doing it! lol
If there is one video out there that can convince someone that it is not hard to build a cnc for hobby use, it is this one. I like the fact that the cost of the individual parts is spelled out - as well as the limitations one has with these parts.
I work as a software engineer, but mechatronics has always fascinated me. I started hobby electronics a while back, now I'm working on stepper motors. I just took apart my old printer and salvaged quite a bit of hardware :) I'm going to create a candy machine and use the printer / scanner body :D
Cant wait for more videos. Been thinking about making a CNC for a while to learn and to use, after putting hours of research into it over the past few months to make sure I dont make a mistake with my tiny airtight student budget I stumble on to your videos where you answer questions about technical and not so technical aspects, make it on a budget and maintain a level of quality. So pumped for more.
Thank-you for these and I request a quick DIY CNC lathe once this project is complete!!
I'm a welder but have a deep interest in building my own machines. This is a great resource! Thank you ver y much for the information you provide!!!
one of the coolest arduino projects i've seen. Actually doing something with it that I can't do with discreet electronics.
I haven't ever in my life scene someone so stoked about CNC machines Great video thank you !
Great work bro, I am a final year mechanical student, when I was in my first year I used to think that I will make such type of machine but our education is very poor student goes to collage just to complete the engineering graduation, and they do not know any think, including me, but we can't do any thing, hope I will be making this type of machine in future, definitely inspiring video,thank you
I couldn't count the number of times I said to myself (out loud), "This is awesome. This is sooo awesome." Thank you AGAIN for posting a continuation video on this subject. Thanks for walking through the g-code as well. That cleared up so many questions I had. I'm going to check out your site right now. I feel like I just have to buy something from you or if you have a donation arrangement, send you something so you can continue these projects. You've done such an excellent job providing content and helping me learn it's the least I can do!
NYC CNC Hi John, thanks again for always replying! I really wish I could make it to the open house. I'm in Michigan, North of Detroit and only but about 5 hours away. Since I can't make it though due to scheduling to the open house, I'd like to maybe help out in some way. I'll shoot you an email with what I had in mind. :)
rewatching this series of vids now that i finally built my first cnc machine. you are the reason im here today well you and this old tony
You should ask him on a date
Your videos are awesome man. A viewer can really follow along and learn as you show and teach your concepts. Your enthusiasm is contagious. Thanks so much for making them. Hats off to you.
This is the first video i watch in your series, but gosh - You are my new hero, for explaining in an easy way... I will keep track of you in the future..... THX a lot..
I will, for sure! :-D
That is a great project! I retired a year ago after 40 years with GE as a Tool and Die Maker. I am getting started with Arduino and plan to use them for projects in my work shop. That machine you built may be on my list of things to work on. Keep up the good work and thanks for the video!
Love this video, just finished my very first Cnc router, based on grbl and arduino. It can mill 47x47cm, and cost less than 100 dollars. I would never been able too put this togheter if it wasent for people på RUclips like you. Actually it was looking at one of your videos that got me inn too it, and i think so far that its been a great Journey. So thanks again for putting your effort in the videos you make☺
+NYC CNC Hi thanks for response☺ for now i have only milled some wood pieces for the enclosure for the electronics too the Cnc, still try too learn difrent software, and fix all the "baby" issues that the machine got☺ this machine was just for test purposes, too see if i could design and make it. So next project will be too make a stronger one for aluminium. ☺ im not into any craftman ship really, i just wanted too see if i could make it ☺ looking forward for your upcomming videos☺
05:18 teleporting fly (yes i realize the video was cut)
haha just saw that. i was sure someone would have noticed that too.
good eye thats funny
@@Q5Grafx whoah 4 years later
i see a lot of passion in your videos , i am sure yo already contribute a lot to Human Kind.
your videos and techniques helped me as inputs for lot of my work.
Thanks a lot
This was great, I really appreciate the sources where you get this stuff. Also, your enthusiasm is infectious, now I want a CNC mill and I don't know why.
+Mike Davis
i've wanted one for years.
i just need a small lathe and a small mill. and i'll make the rest
+NYC CNC I appreciate the sources too. Sourcing can be a real hassle.
Breath of fresh air that video.....Just simply brilliant! Can't wait to get my kids into this. Hope they'll thank me someday.....Thank you NYC CNC
Its really great how you show your thought process and testing your calculations on the machine against the spreadsheet
Watched the whole thing, and it did not feel like a 24 minute video. Awesome job!
I'm building something similar in my mechanical engineering class (as a additional project) but I'm so into this kind of stuff, that I'm definetly going to build another CNC Machine at home.
man i have to say it, that was a pretty good video, what you just did will inspire other like me to change this world, I also worked with KUKAs , Chirones, Pumas, and my favorite, trumpf laser, few years ago and I know what it feels to work with those machines or just watch them work and then build something like that.
good job man
I'm a boilermaker and I have allways been interested in CNC ,your right that this is an awesome era to be able to do this but it looks a bit over my head,great video,good job man.
I know this is five years old but it's timely for me as I build a CNC plasma cutter using Arduino and GRBL. Thanks John!
Can you please share how you did it ?
Amazing! You're the best! After watching countless hours of videos on RUclips about DYI CNC and how to get it to work, I still had some questions, and you cover it all in an easy understandable way! The SW/HW calibration was driving me nuts because I didn't see anything about it! Thank you! And keep it up!
Whoa! I used to volunteer at the old COSI! I remember that very machine!!!! So awesome!
a common fix for the racking is to drive that axis on both side of the gantry, either with two stepper or a single stepper and a drive shaft at each end
A massive thank you John for all the hardwork and inspiration. I'm new to DIY CNC and I'm planning to build a CNC Plasma table with a 1200mm x 1200mm work area. These videos have been a huge help and I've just watched this one for the 3rd time, while configuring my Arduino Uno with a CNC Shield V3.0 and 4 Nema 24 motors.
I'm also hoping to document the entire process for other noobs like me who have littled to no experience. Should be a good ride I hope :)
I haven't watched such video that including patient and detailed introduction to cnc machines.Thank you!
This is great! I am currently a mechanical engineering student and when I graduate I want to get into machining too because I feel they go hand to hand in the packaging industry (the area I want to work in). I am looking into purchasing an easy item like this to get introduced to cnc equipment!
i liked it before watching it because everyone deserves credit for hard work reguardless if built upon other work...good job...watching now!
Been watching you for a while now, I had a really great time watching this episode. I'm still in my noob days of CNC, I'm converting a Sieg X2 for my first CNC machine soon, so this low cost, basic and beginner friendly video really connected with me and why I'm so excited about CNC machines.
Starting to plan out how I'm going to build one of these for personal projects. Thanks for the videos!
It's funny you mention COSI because I live in Columbus and can see the COSI building right now through the window at work!
As always, a brillant video. So great to see some one excited about work like this. I am watching the video as I unpack new tools that came in the post that I need to continue building my own CNC machine.
It was your video on Stepper motors that got me started on building my own CNC.
I alway love seeing the email that there is another NYC CNC video to watch.
I really like that you put parts and other things as links in the description it is something that will keep me coming back to watch your videos because it can be very helpful. thanks!
Excellent video, excellent project and a good alternative to go through a DIY CNC......but what I like most is the enthusiasm given in this video presentation.
Nice,
As usual , you have a fantastic segment on this material. It is so well explained for starters and a great refresher for those with more experience. No matter how often I see this I still am amazed with seeing CNCs control a extruder or machine bit as with remote controls .. and now we use them to control robots on mars ..go figure ! Amazing world we live
Best tube video I have seen in a long time. Meat, not sizzle.
Keep the faith my friend , your doing great work and I appreciate all I'm getting from your videos, Billy
Amazingly simple yet powerful machine to enter I'm to the world of CNC machining .
This would make for a perfect acryllic laser pattern cutter. Love your channelJohn.
Dude, you are a hero of american manufacturing. Keep it up!
Loved your video. I would offer a tip for working with belts. Just multiply the number of teeth by the pitch. If you are using a MXL belt (.080 pitch) and a 20 tooth pulley you will move your axis .08 X 20 = 1.600 inches in one revolution.
Thanks for posting this and detailing your work like this. There is a LOT of great info here. I just want to point out that on the linear motion calculation from revolutions, you aren't concerned with diameters and circumferences, since this actually functions as a gear type of drive. The only sensible way to make this "rough" calculation is to take the number of teeth in the timing GEAR (not really a pulley) and compare that to the belt tooth pitch. Since the belt is flexible, this calculation only gives a ball park, and of course the only accurate way to extrapolate is to measure total travel over the maximum number of revolutions available in the travel, and then also to measure each revolution and any other subdivision of steps that you are willing to invest in characterizing the linearity of your machine! This type of drive is only "practical" for a cutting machine that is making cosmetic items or blanks that will need further precision machine work to be used in a machine fit machine part application.
Your enthusiasm is contagious.
Watching you do this makes me want to change jobs -- I work in software but I so want to build machines like this. Very inspirational! I bet you could use this as an engraver -- have it do the ipsic cardboard lines on your targets to save tormach time... another machine in the production line.
NYC CNC Great minds... :)
You software guys make good money. You should pick up a CNC kit and start tinkering.
Awesome video and project, very nicely explained even for a neophyte like me!
+1pts for your perfect language and joviality!... You've just earned an follower!
I have a professional flatboard CNC-Cutter at home. To fix the vibrations of your pen you need to build a toolholder that push your pencil to the drawing surface. If you you need fine-adjustment, just add a tension-screw to the top of the springholder. And if you replace the marker for a ballpoint pen you will get even better results, maybe already without spring.
If you want to continue on building a drawing machine, you can lift your pen with an electromagnet that pushs up the flexible part of the pen (under the spring).
First CNC DYI video that is right on the mark. THANKS
I also think we live in a great era to be able to make these such things so easily.
Columbus represent! COSI is awesome on days when it's not overrun with rowdy kids that aren't being watched. They have nights that are "adults only" with themes like "puzzles" or "crime investigation" and those are great.
Wow. You have just changed everything for me. Flights are affordable from San Francisco. Thank you. Wow. I hope to make your Open House!
Excellent job! I love the diy aspect of this project. I am also currently running a GRBL based home made cnc machine. I love the price and the ease of use of these little devices. Thanks for putting out great videos.
I actually use it for a little bit of everything. Recently I have been doing some v-carving with some 1/8" carbide 45 degree v-bits. The things that can be done with a CNC machine truly are amazing and GRBL has paved the way for a cost effective electronics setup. I really look forward to your future videos on this subject.
Just various kinds of wood so far, I have been thinking about getting some brass to try but I'm not sure about the rigidity of my machine to cut any harder materials.
That's awesome dude. You are right, we do live in a great age.
More power to you.
I went to COSI also! I saw the same robotic arm there. I also saw several of the 3D printers a few years ago project and built a reprap (or two). We do live in a fantastic age! Thanks!
It has been 1 month short of a year, so I'm not terribly surprised at this. I just went through your bill of materials for the "DIY Cheap Arduino CNC Machine - complete..., Jan 6, 2015" that you recommended from eBay and got a lot of 404 errors, Page not Found. Again, I'm not terribly surprised. It does point out one thing that you might consider for the future, however, is to put enough description of the items that you are referencing that we can find them from another vendor or another source on eBay. I really didn't think that the machine would work for what I want (to cut wood) but the learning experience that you gained from it seemed worth whatever it cost. I thought that I could benefit from it as well. I have the Spark Fun Inventors Kit, that has a robot and Sparkfun's version of the Arduino and shield. That is a great learning experience as well. I want my end result to be a 2' x 3' 2.5-axis cnc router.
I really like your videos. I just recently subscribed. Often the instructions on youtube are long and drawn-out, but yours are very concise, you don't say Um, Er, Ah, between every word, well articulated, and it appears that you actually enjoy what you are explaining. The enthusiasm is contagious. Very well done.
+NYC CNC Thank you for updating that! That was kind of you.
Well done!! Comprehensive production on this- commentary, links for everything! Very impressive and will definitely help me going forward!
cool stuff, I working on a CNC welding machine (3 axle) this is how I thought it should run, in the coming weeks I want to build a little demo version. Great inspiring video's
For the price, damn sweet build. If i ever have a kid, he's gonna have so many fun toys to mess around/learn with haha
one of the best channels i came across in a long time.
From where I get full details of this? Great video indeed,really appreciate it
Thanks a lot!
I am SOO glad that I found your channel.
I want to do some prototyping and was all about to purchase a 3+2 CNC mill for a pretty hefty price as I did not find a decent step through for DIY.
Part 1 and 2 of your vid answered all my questions :)
Cheers and keep on milling!
first of all. I would like to thank you for sharing this .it's my favourite learning. but I'm a taxi driver. no time to do it myself. but still learning about this lesson.
Trippy...I'm so lost when it comes to all of the programming aspect of industry and gadget tech that I am glad you break things down for us dinosaurs, cool video series!
Aloha...Chuck
NYC CNC
Yessir, that's the idea I hope with most all of you there machinists, to teach "us ignorants" what a muffler bearing is, he he!
I must admit that I did enjoy being "in the know" at least with what a dial gauge and thousandth of an inch was :D
Hi John,
Not exactly my cup of tea but I like the simple progressive approach, I like to learn new stuff, who knows, maybe one day I'll dream arduino.
Keep on the great work, you are a pretty good teacher...!
Pierre
I just created a CNC (learning) playlist and this is the first video in it ! :) Yo are so cool, m8.
Thanks so much for this simple "My First CNC" concept.
I was thinking about the Z-axis and it occurred to me that there are two types.
The usual z-axis would be analog. The tool travels through a precise range to give a third dimension with the precision of the X and Y. But this setup just isn't rigid enough to put a cutter in (right?)
The second type would be digital. It's either up or down. On or off. And for that there's almost nothing complex required. On the pen setup in the video I'd add a cheap $2 servo to the pen holder and attach an arm from it to the pen (probably with a light spring for pressure). Now you can lift the pen off the page almost for free!
This would work for me as I just need a blade in there to cut icing for cakes. I need knife-up and knife-down. (Though how to cut vertically without a spinning router type setup into 2mm of icing is a challenge. Any ideas?)
I feel a project coming on!
You are a smart man.. I have no experience whatsoever but have great interest in learning . I have a home project I am wanting to accomplish. Not wanting to depend on a machine shop but would love to learn from ground zero.. building the cnc machine and learn programming gcode
Awesome man! I think I will give this one a go! You really help a lot by putting the links for everything right there. Thanks so much for the video!
You rock dude. I loved the insight on the GCode.
Finishing up my CNC mill now. It's 1,50 X 1,20 meters.
I just love people who help others! Thanks a lot man!!
Hi John
You could very easily add a small RC Servo or even a little Solenoid to the top of the pen that would lift the pen off of the paper during rapid travels. Great video.
Willy
thank you
your videos just made me interest in CNC machinery
respect from algeria
these kind of things that makes an engineer breath... awesome!!!!
Then you should go to a machine shop and see the real McCoy. These are just toys.
Then you go to a Machine Shop and see a load of over-specified, expensive scrap metal, churning-out more scrap metal.
Aren't YOU fun.
I have wanted to build something similar for my self but have felt that the price and knowledge step has been to great. Looking forward to the follow ups and it is itching in my fingers to buy those parts.
you are the coolest engineer on you tube.
love the simplicity of that belt tensioner
another very honest, very detailed, and highly informative video, well done mate! :)
NYC CNC ha! you know what I mean ;)
A lot a guys out there just post the (highly edited) successes, and it's obvious they have taken several cuts (movie talk, not machining talk) to get there, it's obvious on yours that this is genuine, you look happy and (sometimes) surprised when things work first time, which I think people appreciate :)
Did you ever sort out the wiring on that other project like I suggested by the way?? ;)
What a great video! I'm just getting into CAD/CAM and this is a really great project. I'm only hoping I can do this on a Mac as I don't have a PC. Looking forward to more of this great stuff.
This was a fantastic video, really shows how to setup and build a CNC. Really cool!
Somehow I missed this episode. Hmm....mustve gone by my feed fast. I try to watch every new episode. Oh well. Im here now. Very interested in this stuff. Ive wanted to do this for quite a while. Its time.
Thank you so much. This video was the missing link for me in my DIY CNC. So many other designs are clunky and error prone. This is what I have been looking for. I'm going to expand into a Z axis. I look forward to seeing what you cobble together too.
Hi John, thanks for the video, it has inspired me to build my own CNC machine with great success!! I mailed you some pics of my build
You should pursue that dream you had as a kid of doing robotics. Never too late!
Man you have no idea. I was setting up to buy ballscrews, going to use timing belts now. Thanks for the save!
With pulleys using a timing belt or linear motion belt (looks like G2 belt), do not calculate the travel by the pulley OD times pi, you get whatever you want as a result. Just check the tooth pitch of your belt and multiply by the tooth count of your pulley. Your machine would have 16 teeth pulleys and GT2 belt which has 2 mm pitch, so 16 * 2 mm = 32 mm per revolution of the stepper.
One easy way to solve the rigidity in the x axis would be to add another belt to the back rail on two idlers. Connect the two belts with another shorter belt on the left side between the existing idlers. This will keep extra radial load off the shaft of the stepper and should firm up the back end of the assembly.
Dude, this is awesome! Sounds like i gotta build pcb milling machine for my electronics projects :)
Thanks for these, keep the good stuff going!
thank you for your time. I have learned a few things, I build small robotics units and this is cool stuff.
mostly welders and some assembly units in the car industry. But i have started to look in to arm and tracked for a hobby. the cnc router would help in parts construction. I was all so looking at a cnc lathe mill brill. Any good ideas?
Hi. A suggestion for a video related to the subject of DIY CNC. A video on linear rail alignment techniques. Making them parallel, making them flat (I've been reading a fair bit about bedding on epoxy for this) e.t.c., making sure to axis are perpendicular. Thanks for the videos you have done. Good to learn stuff of off someone who has a similar approach to myself.
This is a brilliant idea for a Laser Diode Engraving Machine. Thank you very much
FELICITACIONES, SE VEMOS EN LIMA PERU. ERES UNA GRAN MOTIVACION VIENTO TUS VIDEOS. UN ABRAZO
Should build a lathe, milling machine, 3D printer now. lol. lathe and mill might be different build. But it would still be nice to see a small scale model for garage building based on CNC.
Great work !. Im inspired to build one now.
because of your videos i just bought a 3 axis 3040. if i told you what i got it for youd never believe it in a million years. but at the end of the build it will be a 5 axis for just about $250. well maybe 300 ill have to purchase a 5 axis controller. i have been 3d modeling since 1991 so that part of fusion 360 was easy but learning the ins and outs of g code is the next step
An awesome work, men!
this CNC machines looks like a pro but in a small version!