Caught up on the dream garage build series, which I’ve really enjoyed, so started watching your videos from the start of the channel. This one is great! We have two attic ladders like this, and now I’m looking forward to fixing them rather than dreading it! Thanks!
wow! really neat to see the improvement of the video of the channel over the years. Really appreciate this one as I'm moving to a home with a sloppy ladder. In the SW I have a flat roof with no attic space and moving back east to a 1903 farm house. You just saved me from replacing the whole darn ladder
Thanks. My ladder is very similar to that one. Whenever I see one of those stove bolts loose or missing, I replace it with a new one with lock washer. Actually a couple were missing when I bought the house. I feel a lot better going up and down it, without any loose screws!
It will not be the same for all attic stairs. You need to determine what diameter bolt/screw will be required to fix the problem on your specific stairs. Or hire a professional.
Im getting ready to fix the wire shelf setup in a couple of closets. I decided to just make a wood frame from stud to stud and cutting the wire shelf down to fit, instead of repairing the wall or putting the wood in the wall since i dont have sheetrock to fix it. (Working with what i have available) . Do you have a video you can link for something like that?
Also i was thinking of putting some metal on the ends of the touching wood legs to keep the wood from rubbing each other but they are already bad. But one fix at a time.
Even if your hardware is tight, the holes in the wood, through which the hardware passes, may have become widened or "wallowed out". So the answer is yes, possibly.
I have this same attic ladder and my door was sagging open about 2 inches on the end from closing completely. There are two J bolts holding the two springs in place. I was able to tighten the nuts on both about another 3/8" of an inch which tightened the two old 27 year old springs enough so that now the door closes completely. If that doesn't work, you might need new springs. I also oiled the hinges and the old ladder door opens and closes like a breeze!
Caught up on the dream garage build series, which I’ve really enjoyed, so started watching your videos from the start of the channel. This one is great! We have two attic ladders like this, and now I’m looking forward to fixing them rather than dreading it! Thanks!
Me too!
Thank you! Finally a video that shows how to fix my problem! And i have the hardware to fix it! 😊
wow! really neat to see the improvement of the video of the channel over the years. Really appreciate this one as I'm moving to a home with a sloppy ladder. In the SW I have a flat roof with no attic space and moving back east to a 1903 farm house. You just saved me from replacing the whole darn ladder
Thanks. My ladder is very similar to that one. Whenever I see one of those stove bolts loose or missing, I replace it with a new one with lock washer. Actually a couple were missing when I bought the house. I feel a lot better going up and down it, without any loose screws!
Thanks for the T Nut suggestion! I'll replace all the old screws in mine when I take it down to replace a cracked board in it's casing.
This is great. I wish y'all would put the details in the description, like the size of the drill bit, nut, etc. :)
It will not be the same for all attic stairs. You need to determine what diameter bolt/screw will be required to fix the problem on your specific stairs. Or hire a professional.
@@vids595 If you're recommending hiring a professional then why even make this video.
NICE I need a video on how to replace the barracks and springs on that same unit
Im getting ready to fix the wire shelf setup in a couple of closets. I decided to just make a wood frame from stud to stud and cutting the wire shelf down to fit, instead of repairing the wall or putting the wood in the wall since i dont have sheetrock to fix it. (Working with what i have available) . Do you have a video you can link for something like that?
Also i was thinking of putting some metal on the ends of the touching wood legs to keep the wood from rubbing each other but they are already bad. But one fix at a time.
Great idea !! I will utilize this technique !
but isn't the lower section of this ladder still bending? It doesn't look like it's in a straight line with the rest of the ladder?
Great content!
That was really helpful, thanks!
You just saved me some money.
NICE WORK SIR;))
Like it,thanks.
My stairs are wobbly, but the nuts and bolts are tight. Will replacing them with these type of nuts still make a difference? Thanks for the video!
Even if your hardware is tight, the holes in the wood, through which the hardware passes, may have become widened or "wallowed out". So the answer is yes, possibly.
Thanks!!! Do you have a video on fixing a sagging attic door, ? Thanks in advance
I have this same attic ladder and my door was sagging open about 2 inches on the end from closing completely. There are two J bolts holding the two springs in place. I was able to tighten the nuts on both about another 3/8" of an inch which tightened the two old 27 year old springs enough so that now the door closes completely. If that doesn't work, you might need new springs. I also oiled the hinges and the old ladder door opens and closes like a breeze!
the coolest thing
Any tips on how to add some to a short ladder? 😂 I bought one off Facebook market place and for some reason it's about 1 ft short....
advanced carpentry - what do you recommend for metal attic ladder hinge repair?
WOW THANK YOUUU!!!!
Always trust a guy with hands that look like that when it come to fixing things
👍👍
Bravo 👏🏻 👍🏻
im actually gone use this one POG
gonna *
Where can I buy the parts
Do you do this on both sides?
Yes, correct
My ladder hinge broke. Can you tell me where to get a hinge similar to yours?
atticladderguy.com is a good place to start
Good vid. What about if a certain step itself is causing the creaking? Is there any way to solve that with basic tools?