Tus videos han despertado en mí el deseo de patinar, tanto así que he comprado unos patines y cada vez me dan más ganas de practicar. ¡Muchísimas gracias!
Same here, 275mm foot in a medium skate - 2nd skin liner fits like a glove with toes barely touching the end comfortably. Wouldn’t want to jump gaps on them but skating around in them they feel great, no pressure points
Good video. I disagree in some aspects… the heel tightness was incredibly painful with the Intuition Premium liners. Switching to MyFit Prime or 2nd Skin fixed this for me. The cuff is very low, but also very stiff, so it leaves tenderness after a 2 hour skate session on both sides of the ankle. The toe box is way too tall inside. I can move my toes up and down quite a bit. I’m a size 10.5 in all my skates, and the 10.5 (L) in Standards fit me fine. Worst part is how narrow the heel section is.
I feel ya about the buckle coming loose. I used them for vert. I smashed the boots together for a grab. I landed and the buckle was undone. But the skates are so stiff it was still safe enough on the landing lol.
Great video. I’m glad you also covered the non soul plate big wheel skating. As far as I know, this is the only hard plastic boot that can be ridden without a soul plate. UFR has a higher ride height (or at least looks like it) and Seba CJ is not full plastic. Do you ever plan on doing a follow up 6 months / 1 year later video?
@@ChrizzLau69 They should make them wider. They're to narrow. I shouldn't have to buy new liners and spend even more money. Many other's have brought this same issue up.
Razors SL sizing is unrelated to any other skate/shoe. It feels random. That's why we use mondo sizing, it's at least objective. Did your Omni feel too short or too narrow? (edit: just saw you said too narrow) My SLs are slightly too narrow but bearable in the forefoot, but nearly 3cm too long. The sizing printouts for the Omni looked like it would have the same issue. Would love a wider version.
I don’t remember there being all these issues with sizing when I started skating in 95. I wore a size 10 shoe so I bought size 10 -10 1/2 skates and they felt fine. I had Oxygens, Rollerblade, Razors and I think my first real aggressive skates were Bauer. All 10 - 10 1/2 and no issues. I come back all these years later and now we measure in mondo and everyone wants to downsize. Maybe don’t try to squeeze your foot into a smaller skate for a perceived 10% increase in control/maneuverability.
Hey Ricardo, another banger video! Imo, The standard of skate width in general seems to be too narrow. This is a repeated comment across pretty much all brands. The industry should make a conscious effort to change together. Especially trying to bring new bladers to the sport. Having to buy a pair and return them and try another is a turn-off for first time buyers. Your shoe size should be your skate size. Period. Aggressive inline skates require too much tinkering out of the box they should just skate and work right away.
@@thekamikaze789agreed but the difference in fitment is more significant regarding aggressive inline. In addition a pair of shoes is 60 -150 a pair of skates is 150-500+ more thought goes into your purchase
@@ericgoesham535from what I have heard and seen it fits narrow and has pinch points. This is V1 so there are some kinks to work out. They dont make my size so I couldn't tell you myself. Did you get a pair?
Depends though. With shoes you want at least a cm between the end of your foot and the toe of the shoe. I would never want that much wiggle room in a skate.
Fun fact that’s actually the sound of a hawk, Hollywood just uses that sound for eagles cause eagles make really goofy, un intimidating sounds lol.
Lmfao that's awesome 😎
I know exactly what you're talking about lmao 🤣🤣
A mean looking bird with the stupidest of sound
Lol
Yup, real eagles sound like seagulls. Like a weird goofy laugh.
Tus videos han despertado en mí el deseo de patinar, tanto así que he comprado unos patines y cada vez me dan más ganas de practicar. ¡Muchísimas gracias!
Same here, 275mm foot in a medium skate - 2nd skin liner fits like a glove with toes barely touching the end comfortably. Wouldn’t want to jump gaps on them but skating around in them they feel great, no pressure points
Great to know I'm getting the same set up
Good video. I disagree in some aspects… the heel tightness was incredibly painful with the Intuition Premium liners. Switching to MyFit Prime or 2nd Skin fixed this for me. The cuff is very low, but also very stiff, so it leaves tenderness after a 2 hour skate session on both sides of the ankle. The toe box is way too tall inside. I can move my toes up and down quite a bit. I’m a size 10.5 in all my skates, and the 10.5 (L) in Standards fit me fine. Worst part is how narrow the heel section is.
I’m 277 slightly wide feet, and Large shell fits like a glove. Love this skate!
That's good to hear? What shell size? I'm all of a 12/46.
@@jamesgadd8341 Large shell.
I feel ya about the buckle coming loose. I used them for vert. I smashed the boots together for a grab. I landed and the buckle was undone. But the skates are so stiff it was still safe enough on the landing lol.
That´s super scary! 😬
Ive got them built out with RL2s and just waiting for Scotlands rain to piss off. Then will give them a pounding!!!
The k2 fattie pro re-release about 15 years ago had the same design flaw, where the main buckle released when you "bang/clack" your skates together.
Great video. I’m glad you also covered the non soul plate big wheel skating. As far as I know, this is the only hard plastic boot that can be ridden without a soul plate. UFR has a higher ride height (or at least looks like it) and Seba CJ is not full plastic.
Do you ever plan on doing a follow up 6 months / 1 year later video?
Rollerblade blank?
I'll be sticking with my seba carbons and upcoming FR wizard base high boots.
These boots look good with Sola frames
How much for that shirt? LOVE IT.
muito bom meu amigo .
Do you notice any difference in power transfer compared to a carbon boot?
What skate company does he work for?
Como quería que llegara este día
i wouldnt trust an avocado from starbucks
Omnimatrix, quadros em quadros
👍🏾
Can you heat mold the liner?
Yes, liner and boot. Instructions on their website.
Why do you step and not jump on tricks? fs torque and fs back slide?
I like dis skets
@ricardolino when will you review the Gawds Aton skate?
I'm a size 9.5 U.S. in Razors SL's. But I had to get a size Large (10-10.5) U.S. in the Standard Omni's and they only just fit....
The stock comfort liner is thick and needs break in. Switch liners and you’ll have more room.
@@ChrizzLau69 They should make them wider. They're to narrow. I shouldn't have to buy new liners and spend even more money.
Many other's have brought this same issue up.
Razors SL sizing is unrelated to any other skate/shoe. It feels random. That's why we use mondo sizing, it's at least objective. Did your Omni feel too short or too narrow? (edit: just saw you said too narrow) My SLs are slightly too narrow but bearable in the forefoot, but nearly 3cm too long. The sizing printouts for the Omni looked like it would have the same issue. Would love a wider version.
@@lacedmanoeuvres 9.5 should be 275, which is the sweet spot for the large shell. Just give it some time, they will break in.
I don’t remember there being all these issues with sizing when I started skating in 95. I wore a size 10 shoe so I bought size 10 -10 1/2 skates and they felt fine. I had Oxygens, Rollerblade, Razors and I think my first real aggressive skates were Bauer. All 10 - 10 1/2 and no issues. I come back all these years later and now we measure in mondo and everyone wants to downsize. Maybe don’t try to squeeze your foot into a smaller skate for a perceived 10% increase in control/maneuverability.
Hey Ricardo, another banger video!
Imo, The standard of skate width in general seems to be too narrow. This is a repeated comment across pretty much all brands. The industry should make a conscious effort to change together.
Especially trying to bring new bladers to the sport. Having to buy a pair and return them and try another is a turn-off for first time buyers. Your shoe size should be your skate size. Period.
Aggressive inline skates require too much tinkering out of the box they should just skate and work right away.
even in street shoes your shoesize is always different. it just never bothers anyone, since you dont need a good fitting shoe...
this is a wide boot
@@thekamikaze789agreed but the difference in fitment is more significant regarding aggressive inline. In addition a pair of shoes is 60 -150 a pair of skates is 150-500+ more thought goes into your purchase
@@ericgoesham535from what I have heard and seen it fits narrow and has pinch points. This is V1 so there are some kinks to work out. They dont make my size so I couldn't tell you myself. Did you get a pair?
Depends though. With shoes you want at least a cm between the end of your foot and the toe of the shoe. I would never want that much wiggle room in a skate.
i'll pass on these
I can't concentrate when someone wears a shirt made from a retirement home curtain 🤭
Dont post on youtube. I already pay monthly. If thats not good enuf go somewhere else i dontbwant to see your adds. You just lost a viewer
lol where should he post then 😅
Srl if u don’t wanna ads then watch on pc with ad blocker.