Lightworks 14 - Problems with Transitions
HTML-код
- Опубликовано: 11 сен 2024
- We look at a much asked question about problems with Transitions and how to solve that problem
The Lightworks Video Series:
Basics 1 - • Lightworks 14 - Basics 1
Basics 2 - • Lightworks 14 - Basics 2
Titles and Overlays - • Lightworks 14 Titles a...
Working with Audio - • Lightworks 14 - Workin...
Picture in Picture - • Lightworks 14 - Pictur...
Making an advert / Intro - • Lightworks 14 - Making...
Split Screen with Animations - • Lightworks 14 - Split ...
Adding Multiple Titles to a Clip - • Lightworks 14 - Adding...
Adding Overlapping Titles to a Clip - • Lightworks 14 - Adding...
Zoom in and out using Animations - • Lightworks 14 - Zoom i...
Half of the forum posts explain transitions like you're deciphering the code of The Matrix or something, it's absolutely ridiculous. Thank you for taking the time to explain it in a sane fashion.
Oh my god! Finally a video that makes sense! Cannot thank you enough for being clear and simple in your explanation.
Thanks!
@@techismad too much talking just get to the point mate
Clear explanations, as always. This video and others in the series are perhaps the best free Lightworks tutorial one can find on RUclips. If all the tutorials on RUclips on any subject would be so well done, learning anything new would have been a breeze. We are all very grateful for your time and effort in making us happy.
Many thanks for this very clear and thorough explanation of a very annoying problem until one realises what is going on.
I understood that it had something to do with insufficient footage, but I couldn't quite wrap my head around it anyway.
Now I understand perfectly, its like trying to mix the colour green by having a bucket of blue and a drop of yellow.
Thank you
Wow - SO well explained. Much better than the official site!
Finally someone explained the overlapping problem. I am new to lightworks and this has been confusing me all day. Since I added a whole sub-clip, I kept getting the dang insufficient overlapping. Thanks so much!
It's why I made the video - this problem used to really bug me when I was making videos!
fantastic!!!! very concise and straight to the point. i gave thumb up.
Your videos are the best Lightworks tutorials. I thought I was going mad or that there was a bug when dropping the Mix effect but figured it out in the end before I watched your video. Thank you anyway. Please make more tutorials!
omggg thank you so much i was loosing my mind all day trying to figure this out! cant believe its so simple! may you receive all the blessings you deserve!
I have two 20ish second clips and neither are trimmed. This method still does not work, even for a 10 frame dissolve. I'm ready to give up on this program and fine another video editing program. It shouldn't be this complicated!
when i do the transition i faced this problem..It is really frustrating..After watching this video i learned something..thank yoi:)
Great video as usual and tackles the problem in a neat manner. Thank you.
Brilliant explanation 💯
Thank you for this video. You did help a lot. Besides, you have a very pleasant voice.
thanks for your very helpful series on lightworks!
Seriously well explained and to the point, solved my problem
Outstanding - thanks so much for the excellent explanations.
You are most welcome!
You made it clear and simple! THANK YOU!
That was exactly the explanation I needed thanks
Atlantis Production Andalucia - you are most welcome. If you have any ideas for more tutorials- just leave a comment.
Duuuude! Thank you so much this has been driving me daft!!!!
It's my number one question..... "WHY DOES MY CROSS DISSOLVE NOT WORKKKKK!!!!" - I had to make a video about it therefore!
To be honest this much better than those tutorials in lightworks YT channel. I know that this video old but if you could good sir, can you try to show how blend vfx works because it seems its not working on my end. Thank you
Which blend vfx are you trying to use?
@@techismad Hello, the VFX that I would like to try on is the video on text because I want to learn how to make a great intro. When I go to VFX of lightworks, there is a blend option I am guessing it would help me do a video on text but it seems not working.
Extremely Clear
omg....thank you so much i was so frastrated and pissed off of the transition frozing/lagging, ty!!!!!
doesn't work for me, i don't have any in and outs, i just cut those clips in VLC as highlights, put them together in lightworks and now wanna add fade in/out between all the clips but it gives me this error, so if i have it centered, to and from here, it's all the same...
another thing i can't find is how to do this for 20 clips at once instead of every single time... i just can't believe there is no option like this, but i can't find it anywhere
Thanks for your videos man, you’ve done an amazing job explaining how to use this program, but I still can’t manage to put a dissolve transition between two of my videos, I tried with "centered there", "from there" and "to there" but nothing works, do you know why ?
gracias
Fantastic vid man
Hi, your video is very good for me as someone who started with cutting videos a few days ago.
I would like to quickly ask you something else if that's allowed. My videos are looking good and
I figured out how fade out the audio. The audio sounds good in Lightworks. But after the export
I always hear at the very end a kind of noise like a crack where I cut the audio that is longer than
the video.
Any idea what the problem is ?
Thanks in advance
Michael
Thanks, just what I wanted :)
Ur the best man!!
Sometimes I am loosing the sync between Video and audio, if I am using transitions. How can I get rid of this problem? Thank you.
thank you your videos are definitely the best of all the Lightworks tutorials I've tried! Is there a way of speeding a clip up but gradually ie. not the whole clip but that it gradually gets faster or slower?
Thanks for the kind words.
For gradual speed ups or slow downs, a trick you can use is to cut your clip(s) using the C key, and then right clicking on each cut clip and choosing "Speed". So lets say you had a clip, and you cut it 3 times. You would end up with 4 cut clips. Right click on the first of them, and choose "Speed". 100% is normal time, so if you then made it 110%, it would be 10% faster. Right click on the second clip, choose Speed and set this to 120%. Do this for the other 2 clips and set the speed faster and faster. If you play the clips now it would go from fast, to faster to faster and so on.
One thing to think about is that if you make a clip faster, it will actually get shorter. What I mean by that is if you have a clip that lasts 10 seconds, and then set it's speed to 200%, it will be twice as fast, and now will only last 5 seconds. So when you're cutting your clips, you might want to think about this, especially if you're trying to match the video to music.
ESH ICT Really detailed explanation. I never posed the question, but this was a great, informative answer to refer to in future. Thank you! 🏆
tq so much it is very helpful!!!
Now getting the "there is not enough incoming media to make this transition" message...
Is the duration editing a pro version feature? Duration is grey for me and I don't have a drop down menu beside it. :/
Hey,just wondering, how would I save this video on my computer, not just in lightworks, I have to put this on a USB drive to take to school.
If I play them out side of light works they play normal but if I doble click them in light works they play upside down
The problem i have ran into is an error that says "There is insufficient incoming and outgoing media" this happens all the time when i try to add a transition centered, just like your first transition. I have also had the same error you discussed and still no go. I do exactly what you do with my transitions and it gives those errors. the first clip is 15 seconds long(an intro video) then the clip i want it to dissolve into is about 15 minutes. i can never get it to work. I have been able to add a trnasition ONCE by accident and the issue after that was about 2 seconds of the audio was gone from the second clip.....
Now the only thing I can think of, is that you’re trying to add a transition to two clips, and you’ve got absolutely no frames to steal from. So lets say you have a clip that ends, and there are no extra clips at the end of this clip in the original clip. You then put another clip after this, and again, there are no frames in that clip to make a transition from. In this case Lightworks would not be able make that transition work.
ESH Tech so to add clips, i would need to do what? Is adding clips different than marking the ins and outs? Not gonna lie, windows movie maker is alot easier to add transitions to a project. I tried today and got exactly what i was looking for. HOWEVER, this does not mean i am unwilling to learn lightworks and more advanced features:) thanks
THANK YOU!!
Fei Du - you are welcome!
My issue is with audio...sometimes it creates a gap, sometimes not. Just had to redo a bunch of editing because the audio was , because half the time the transition creates and audio gap, other it does not. Annoying.
Whenever I import my In my intro, it is in some wierd slow-mo but when I try to speed it up abit it goes all sqweaky.
That sounds like a sample rate problem. Where is your intro from?
ESH ICT Thanks you for your exceptional Lightworks tutorials. Please could you advise, what are the keyboard shortcuts for undo and redo? Thanks and keep up the great work 🏆
You should just be able to use CTRL + Z for undo, and CTRL + Y for redo. Thanks for your kind words by the way
ESH ICT You're welcome! Great. Really useful information and so much easier than use the mouse. Thanks you! 👍
Hi! Great video, thanks! Is there a way to add different transitions to LW rather than just the basic ones? I have a full version but it's still the same as free when it comes to transitions...
You can try these links: www.lwks.com/index.php?option=com_kunena&func=view&catid=7&id=155&Itemid=81
It only half solved the problem... I have a fully cut up and edited sequence and this works on some cuts but on others it can't seem to "steal" frames from the other. I've tried centered here, to here, from here, on one clip or the other or on both. Still not working
The secret to this is to try and never use any clips / subclips where your in or out is right at the start or end of the clip. So, if you have a clip, and put the in exactly on the first frame, you'll never be able to use a dissolve at the center - there's just no frames in that clip to steal.
If I will apply dissolve to my video then in between clip A B and c
For first clips A and B dissolve works good in fact best
But if I apply dissolve to Clip B and C then at the end of Clip B video is all black ?
Can u let me know why this is happening ?
I can guess this is something to do with how many frames the dissolve is trying to use in clips B and C. Remember, you put a clip in the timeline that has no extra frames to steal from, transitions find it hard to work.
not working
There’s a problem that when I put mi clips in light works they appear upside down. Help
If somebody knows how to solve this problem please reply
If you double click those clips, do they play upside down? As in, if you play those clips outside of Lightworks, are they still upside down?
i fund out that videos that are recorded verticaly when import them into lightworks they dont apear upside down, but videos that are recorded horizontaly(the way a always record) are upside down. got any sugestions of what should i do?
i found another way. it is to have the camera filming upside down, bu i dont relly feel comfterble doing that but aniways i will do it so if you come up with a solution please tell me, thank you and keep the great videos.
ANONYMOUS JOSE sounds like you are shooting on a phone? I had something similar when changing between videos shot in portrait or landscape on my phone. You can use one of the FX in Lightworks to rotate your videos as needed.
Great vid. But I'm still having this problem after trying this repeatedly. What am I doing wrong? Any advice? And thanks so much for making this vid👍
what is the problem you're having?
@@techismad it's still sending that message about overlapping media. And it does it for every clip I try. Doesn't matter if it's in the middle. Or it wants to completly add it to one clip or another. Like how the little grey dissolve box pops up on yours, mine won't do that for some reason. So it just makes the end of my clips dark. Hope all that makes sense. Thanks for the reply.
I have no problem getting the effects in but when I add them, the whole video starts lagging and skips the transition. Any advice?
I have the same problem on a fairly decent MacBook. You have to remember that transitions push your computer to breaking point. You can try closing all other problems when you work on Lightworks. When my laptop lags, I normally drag the red play head through the transition manually with my mouse just to see if it’s working.
I noticed you have put a video up on your channel - can I ask if you used Lightworks to make this video?
ESH Tech yes I did
fantastic! I hope my videos helped you out!
ESH Tech yes they did, very good job
Can you do a video on how to speed up and slow down clips please?
Just right click on a clip, and then choose speed. Set the percentage higher for faster, and lower for slower
ESH ICT what's the best way to achieve this if you're editing at 30 FPS but then want to import video purposely shot at 60 or 120 FPS in order to provide smoother slow motion source footage when slowed-down?
error effect please :(
Still doesn't work
Good vid.How could i hide black bars?
You mean the black bars on top and bottom of a video? Any time you have black bars, it means that your video is a different size from the normal size of a screen. So if you have widescreen, and watch it on a normal laptop, you'll get black bars a the top and bottom of your video.
You can basically use a basic 2D DVE and adjust the size of your video. Note: If you adjust a video like this, you'll end up losing some of the picture after you resize the video.
it doesnt work
Toke Østergaard - what did not work?
ESH Tech Well it cant ise the dissolve the 2nd time