How to configure Mikrotik Device point to point step by step

in this video we try to configure mikrotik point to point configuration step by step. in this video we configure mikrotik in super-channel mode. if any place you get high interference then you use super channel mode .Conformance Testing Mode. Allow all channels supported by the card.
List of available channels for each band can be seen in /interface wireless info allowed-channels. This mode allows you to test wireless channels outside the default scan-list and/or regulatory domain. This mode should only be used in controlled environments, or if you have a special permission to use it in your region.
#loadbalancer #loadbalance #loadbalancing #multiwan #mikrotik #mikrotikindonesia #mikrotikrouterboard #mikrotikid #mikrotikrouter #mikrotiktutorial @Mikrotik Indonesia - Citraweb @MikroTik @Configurar Mikrotik Wireless @Mikrotik Training @Mikrotik Training #routerboard #mikrotikrouterboard #router #routers #routerboard #multiwan #multiwanrouter
#mikrotikpointtopoint #pointtopoint #p2p #wireless #wirelessnetworks #wirelessnetwork #mikrotikpoint2point

[@shubhamkumawat1423]

Good

[@obedeleal1]

Top

[@knknetwork4467]

Thank you

[@paulmacgiollacaoine8619]

Excellent video, thanks.
Can you explain why you choose "5230" as the frequency & scan list in the wireless settings please?

[@knknetwork4467]

It's depends on frequency uses at location

[@aresgod6814]

hello. the bridge will work if you do not give the address to it and the points? in other words, use the bridge as a wire(Ethernet)

[@lalmanlalman3760]

I P kitani hai

[@Rahulkumar-xb7so]

i am currently using BSNL AirFiber through mikrotik p2p connection but speed atmax 30mbps. can i use this set for persnal isp like jio Fiber. Aireal Distanc almost 10 km. device-MikroTik LHG XL HP5 Dual Chain Extra Large High Power 27dBi 5GHz CPE Point to Point Integrated Antenna (RBLHG 5HPnD XL US)

[@shrinathdwara3362]

first check your receiving signal and frequency interface

[@Rahulkumar-xb7so]

@@shrinathdwara3362 signal is 72dbi fq is 5320

[@knknetwork4467]

Please change frequency and check again

[@martinsk8088]

I have only licence 3 on my : Mikrotik RBSXTsq5nD, Can i use it for ptp and connect my neighours to internet ?

[@knknetwork4467]

No

[@knknetwork4467]

You want 2.4 ghz omni/sector antenna

[@martinsk8088]

@@knknetwork4467 thanks a lot, I spent a lot of time setting it up.
So i Can use one of this : Mikrotik RBSXTsq5nD
And the AP will be : Mikrotik RBOmniTikG-5HacD
Or something else.

[@mjvcricketclub]

Yes l3 licence level can be setup for ptp ... I hv setup in 3 different locations

[@yulianahyulianah250]

Gan, saya punya 2 alat Sxt 5hnd, saya mau melakukan point to point dengan 2 alat itu apakah bisa?
Mohon pencerahannya 🙏

[@knknetwork4467]

Please share in English language

[@knknetwork4467]

ruclips.net/video/W6MA7PpTOak/видео.html

[@djcoolsymi4799]

@@knknetwork4467 will work with same setup but with 801.11 instead nv2?

[@user-zenov]

ha-ha CCQ4-5%