Hey Guys! Today we will be programming/ activating cruise control for my Vauxhall Corsa D using OPCOM. Thanks you very much for watching, hopefully it was helpful!!
I finally managed to install it on my Corsa D 2011 facelift model. This car has engine code A14XER and the wiring is pre-installed. All you need to do, is to install the stalk indicator and just enable it from the opcom. Unfortunately, none of the available opcom clones fully support this engine. You can buy it by yourself and check: although you can read all sensors, you are not able to program the bcm module. I just paid 20 euros to an authorized opel repair shop and they did it for me. They used an official opcom interface and yeah! The result: 2 liters less consumption in 110km/h speed.
This is very interesting, but how the cruise control works? Did you fit any controller for that ? How do you set it? And most problematic for me is the Security Code - dealer asks 40 quid for that - which is too much as for xx years old car. Any idea how to get it out of 2011 corsa D cheaper way?
Hey i just bought a Corsa today and I'm so excited! You can buy a leather cover for the steering wheel. There's a very popular channel that shows how to stitch it onto the steering wheel and his job is actually brilliant!
Hello Thomas, I see you stopped posting a while back, but I just got into your videos. Maybe you still check your channel from time to time so here it is: I already have the cruise control on my Corsa, but the „witness„ light on the dashboard does not light up when activated even though the system works. Did it light up in your case after you coded it? One of the mechanics I talked with said he had a Corsa also and had the same problem and that it comes like that from factory, which I find hard to believe. If is there it must be a way to make it light up when the cruise control is active.
Great video! What is ofcom and where can I get it? Also did you have to get any clutch pedal/brake pedal switches? Don’t suppose you could do a quick video showing where these are or what to look for? Any help would be appreciated!
Hello george, opcom is just a piece of software/hardware that allows you to interface with vauxhalls. You could look at the pedal and brake and the electrical boxes that they connect to. Take the parts numbers, post them here and ill tell you mine.
Were do you get the security code? The carpass card? And do you have any ideas on how to enable the board computer modes? And how to enable front fog lamps?
You get the security code from the vauxhall/Opel dealer will cost tho. Mines was 30 gbp as it didnt come with the car. As for the programming, I do it using opcom. Got a few videos covering different things to give you an idea. As for the fog lights I'll be doing them in not top far future so look out for that!
Hi, which Windows Version do you use vaux com with? Ich have issues with Windows 10. have installed everthing and interface Test works Succesfull! While trying to a Access to a ECU it dies Not response.. did you have same issues ?
Hi Tom, I watched some of your videos about the Corsa, all really helpful. I'm trying to activate the cruise and I'd like to know the Op-COM version you used (1.59 1.70 1.95...) because I tried with a 1.95 but it doesn't have all the options in the ECU menu and also It doesn't let me in in the BCM Menu, only programmed the IPC. Thanks in advance
Hey man. So I thought I had cruise control on my 20090 Corsa D as I saw the symbol and some arrows where the light switch is (I'm referring to the rotary dial which controls the lights, sorry for not being clear)...does this mean I have CC in my car or not? I was thinking no because my left stalk doesn't have the CC symbol on it and therefore no way to engage/disengage the CC...really confusing because the arrows to adjust the speed are on my car next to the lights! Thanks in advance bud
Hey, it potentially could have had cruise control activated in the past. And they realised the work involved in changing it. So potentially it could be and also may not. Hope this helps a little!
@@TomsDriveway No, those symbols on the lighting switch are nothing to do with the cruise control. CC is only ever operated by the left hand stalk on the column.
Hi mate, whenever I click on program varient configuration, it puts a message up saying, I 'reading security code message up... Please wait... Programmed security code is... I put my security code in but it doesn't allow me to enter it.
Mine doesnt do that, id just recommend the following plugs ignition coils air filter the usual. If you get a code though, can investigate more. Mine annoyingly never records one for me to investigate.
Its quiet a comfortable town city car, good styling nice interior. On the motorway it lacka power although it can do it, I drive a fair amount of motorway and it definately can do it. Just dont expect to have much power to accelerate at 60 to 70. Personally the 1.4 maybe better.. and use less fuel. As it aint amazing in the city i get like 38 mph and 46 mpg motorway. With a few fast accelrations
When I click on the program variant configurtion I don't get the option to change the cruise control to present it just comes up with nothing? any ideas.. I have a 64 corsa
Hi mate I’ve installed cruise control and when I turn the ignition on I get the icon on my dash however when it comes to using it it doesn’t work. Any ideas? Would I need a wire from the bcm and happy to travel Corsa d sxi 2008 Cheers
Hi quick question may be abit stupid will any OBD cable work or do you need the OPCOM one and also how do you obtain the security code I have a 61plate Astra J
You have to take your v5 to the vauxhall dealership and 30.00 pounds its costa for them to retrieve it. And you will need the opcom cable interface. Not silly at all.
Unfortunately you can’t program newer bcm’s using opcom anymore. There was a issue with the bcm bricking under certain conditions nothing to do with opcom silly things like changing the battery or jump starting. Vauxhall revised the bcm to prevent this and now the knock on affect is tech2 only. You can change the bcm to a older one but the cost of programming via tech2 and the risk of it bricking. There’s a guy out there on the Vauxhall forums he’s a bit of a legend like the A-team just ask around
If you use OpCom 150406, VauxCom 160115a or OpCom 170823c you have excellent access to all the modules on the Corsa D. However, some BCMs are locked and can not be programmed, even by the dealer with Tech2, so check you can change the variant coding BEFORE running any wiring.
If you google opcom, you can buy the official one. However if you are cheap like me, use Ebay and type opcom and you get a clone version. Still work fine though.
Hi there how do I get my stereo code it keeps displaying safe mode I’ve got op com but don’t no how to do it can you help please corsa d VXR. Cd 30 mp3 thank you 👍🏼
I ask you about that because i ordered 2 times from different buyers from Aliexpress the opcom but the Windows10 can not recognise the interface...can you write me the seller name from witch you got the opcom..thanks !
I bought mine off Ebay, it was over a year ago i purchased it so i no longer have it. I did have issues myself with win10 but with fiddling i got it to work.
The security code comes in the cars paperwork, sometimes called a vauxhall pass. If lost you have to buy from dealer. As for the engine number its on the block near the oil dipstick
Yes, the model is in the car's papers, but I didn't find the code. But I can read on some forums that we cannot enter in the BCM menu because it's bridated. Is it a link with the code that I can't find? And what's the name of the document where you found the code? Thanks.
I saw on a video the car pass what you are talking in the video. But on my opel in Belgium, I don't have it. Then how do you know if your BCM can be programmed or not? What do you think about this video to get the code? ruclips.net/video/grhJ4nARJkY/видео.html.
Hello again, I installed the comodo. And my car has already the cable. Fortunately! But the dealership told me that I could burn out the on-board computer when I change the programming. Does anyone has already that problem?
Finnaly, with your version, I can communicate with my car. So happy. But I don't have the correct engine in the list. Has anyone chosen a similar? Was it working? In my case, I have a A13DTE engine. Which should I choose?
To program it, depends if you just wanted it programming. £10.00 i guess. To run the wire and program i guess £40.00. Idk really hard to quantify the price.
Yeah it could be done in a day providing you have the security code, the stalk. The brake/clutch switch is there. But with it bein club its likely. Even better if the wire is already there I sorta underestimated what is required for the job, so it will be more expensive. But if your interested. Here is my email tjogrady@hotmail.co.uk
Hey Shandy, you find it in your owners manual with your vauxhall. However if you cant find like mine, you have to go to a vauxhall dealership with your v5 and i think £30 it costed me and they will get it you. Rediculous the price but only way to get it!
Many thanks, are you talking about the "car pass" my car did not come withi it! I was worried about the radio code but from what I can gather the Corsas dont have one. The garage I bought it from said the radio did not have a code but he didnt seem too sure.
I am indeed talking about the vauxhall car pass. No need to worry about radio as its linked to the clock, as im sure you know already. But to program you need the sevurity code off the vauxhall pass unfortunately.
Twist the end of the stalk forward to turn on the cruise control, press the button on the end if you want to turn off the cruise control. Twist backwards to reduce the speed or twist forward to increase the speed.
Hi friend, i tried, but at minute 1.04 i can’t because when i push there is an error. Can you help me? Can you give me your email so i can send you some pictures of This problem? Thank you
You have to take your v5 to the vauxhall dealership with £30 and they will get it for you. Thats is you dont have it already in your car booklet thing.
Hi, thanks for your videos.. I already have clutch switch and the bcm to steering column cable. But I can't program my bcm. Cruise control voice is "Not available". Do you know how to fix? I already use the same opcom release, with 1.59 fw. I've a different bcm, with code 13142240 (corsa d my07). Thanks in advice, cheers..
Sorry for slow reply, hmm sounds strange. Only thing i can suggest is there a way you can get a newer opcom release. I recall i had issues finding it orignally. As mine is china clone.
Tom's Driveway I also tried with tech2 (in Opel official service) and I can confirm that I've some limitation in my bcm. Talking with mechanic, he tell me that Corsa D with enjoy equipment can't add some feature (like cruise control or rain/light sensor) because Opel/Vauxhall limit bcm. I can only try to change it, but I don't know if made it worth to try.. Thanks again for the reply :)
Yeah that is true that some bcms do have limitations. Tbh im not sure if changing your bcm is worth it. Out of interest what model of corsa d do you have. Mine is life.
I'm in Belgium. Someone know which version of OP-COM I have to install for my Corsa-D of 2010? On the CD, I have these versions : 090820b 090420 (For De : Germany) 081016 (Activation by mail needed) 08-2010 (China Clone) 2012 (doesn't work) 120309 (Vaux-Com + China) 100219 (without drivers)
![Chino Pacas - Smith (ft. Junior H & Fuerza Regida) [Video Visualizador Oficial]](http://i.ytimg.com/vi/BVK6k56X30Y/mqdefault.jpg)
Thanks Tom for the instructions. I did my corsa D today following your notes.
I finally managed to install it on my Corsa D 2011 facelift model. This car has engine code A14XER and the wiring is pre-installed. All you need to do, is to install the stalk indicator and just enable it from the opcom. Unfortunately, none of the available opcom clones fully support this engine. You can buy it by yourself and check: although you can read all sensors, you are not able to program the bcm module. I just paid 20 euros to an authorized opel repair shop and they did it for me. They used an official opcom interface and yeah! The result: 2 liters less consumption in 110km/h speed.
Thanks bro! I just oreder opcom and the stick last night and Im gonna use your straight fwd clip as guidance. Bless you.
Wow thanks for sharing very helpful myn already has it just not working lololololol so this is like next level info
This is very interesting, but how the cruise control works? Did you fit any controller for that ? How do you set it?
And most problematic for me is the Security Code - dealer asks 40 quid for that - which is too much as for xx years old car.
Any idea how to get it out of 2011 corsa D cheaper way?
Hey i just bought a Corsa today and I'm so excited! You can buy a leather cover for the steering wheel. There's a very popular channel that shows how to stitch it onto the steering wheel and his job is actually brilliant!
Hey, thats great! They are good cars to be honest. Thanks for the suggestion i will check it out!
Really good Instructions, helped me a lot. Thank you very much!
Thanks ! todaya im going to do the same to a Corsa D as well!
Just fitted cruise control to my combo van 1.7CDTI best mod I have ever done! Any excuse to have the cruise on I will lol 😁
Hello Thomas, I see you stopped posting a while back, but I just got into your videos. Maybe you still check your channel from time to time so here it is: I already have the cruise control on my Corsa, but the „witness„ light on the dashboard does not light up when activated even though the system works. Did it light up in your case after you coded it? One of the mechanics I talked with said he had a Corsa also and had the same problem and that it comes like that from factory, which I find hard to believe. If is there it must be a way to make it light up when the cruise control is active.
Fantastic video mate, keep them up!
Thank you so much! I really appreciate that .
Great video! What is ofcom and where can I get it? Also did you have to get any clutch pedal/brake pedal switches? Don’t suppose you could do a quick video showing where these are or what to look for?
Any help would be appreciated!
Hello george, opcom is just a piece of software/hardware that allows you to interface with vauxhalls. You could look at the pedal and brake and the electrical boxes that they connect to. Take the parts numbers, post them here and ill tell you mine.
Hi, where did you get opcom? Can't find a decent one
Were do you get the security code? The carpass card? And do you have any ideas on how to enable the board computer modes? And how to enable front fog lamps?
You get the security code from the vauxhall/Opel dealer will cost tho. Mines was 30 gbp as it didnt come with the car.
As for the programming, I do it using opcom. Got a few videos covering different things to give you an idea. As for the fog lights I'll be doing them in not top far future so look out for that!
Tom's Driveway yeah, so basically the carpass card has the needed security code? The fog lamp video will definitely make my day.
It does indeed, basically has the security code and the chassis number on it. I will make it for sure!
Hey i get the Error Programming Failed!!
What to do?😕
Hi, which Windows Version do you use vaux com with? Ich have issues with Windows 10. have installed everthing and interface Test works Succesfull! While trying to a Access to a ECU it dies Not response.. did you have same issues ?
2008 Corsa d esentia which version is suitable opcom version?
Hi Tom,
I watched some of your videos about the Corsa, all really helpful. I'm trying to activate the cruise and I'd like to know the Op-COM version you used (1.59 1.70 1.95...) because I tried with a 1.95 but it doesn't have all the options in the ECU menu and also It doesn't let me in in the BCM Menu, only programmed the IPC.
Thanks in advance
I have 1.59 I think
Tom's Driveway Hi, thanks for answering. Unfortunately I think that my ECU an BCM are locked, i tried with 1.99 1.95 and 1.59. Thanks anyway.
Where can I get a good working op com ? A lot of reviews say it doesn’t work properly
Hi friends could you upload the software you use ,because mine only lets you reset the oil does not let me see anything else on the engine.thanks
Hey man. So I thought I had cruise control on my 20090 Corsa D as I saw the symbol and some arrows where the light switch is (I'm referring to the rotary dial which controls the lights, sorry for not being clear)...does this mean I have CC in my car or not? I was thinking no because my left stalk doesn't have the CC symbol on it and therefore no way to engage/disengage the CC...really confusing because the arrows to adjust the speed are on my car next to the lights!
Thanks in advance bud
Hey, it potentially could have had cruise control activated in the past. And they realised the work involved in changing it. So potentially it could be and also may not. Hope this helps a little!
@@TomsDriveway No, those symbols on the lighting switch are nothing to do with the cruise control. CC is only ever operated by the left hand stalk on the column.
OpComDiagnostics Think I miss read the question at the time, yeah you are totally right
Hi mate, whenever I click on program varient configuration, it puts a message up saying, I 'reading security code message up... Please wait...
Programmed security code is...
I put my security code in but it doesn't allow me to enter it.
Have you ever experience a loss of power or hesitant acceleration in your corsa Tom?
Interstingly enough, i sometimes do Mahammad. When its cold it can feel sluggish when accelerating. When it warms up it usually feels bettee..
Tom's Driveway good to know. It happens to my brothers corsa whenever he is going uphill and sometimes when driving on the dual carriageway.
Mine doesnt do that, id just recommend the following plugs ignition coils air filter the usual. If you get a code though, can investigate more. Mine annoyingly never records one for me to investigate.
Tom's Driveway how is your car in general. I'm also getting an 08 1.2 corsa for my 1st car
Its quiet a comfortable town city car, good styling nice interior. On the motorway it lacka power although it can do it, I drive a fair amount of motorway and it definately can do it. Just dont expect to have much power to accelerate at 60 to 70. Personally the 1.4 maybe better.. and use less fuel. As it aint amazing in the city i get like 38 mph and 46 mpg motorway. With a few fast accelrations
When I click on the program variant configurtion I don't get the option to change the cruise control to present it just comes up with nothing? any ideas.. I have a 64 corsa
Hi mate
I’ve installed cruise control and when I turn the ignition on I get the icon on my dash however when it comes to using it it doesn’t work. Any ideas?
Would I need a wire from the bcm and happy to travel
Corsa d sxi 2008
Cheers
Yeah it is likely you need the wire by the sounds of it
Hi quick question may be abit stupid will any OBD cable work or do you need the OPCOM one and also how do you obtain the security code I have a 61plate Astra J
You have to take your v5 to the vauxhall dealership and 30.00 pounds its costa for them to retrieve it. And you will need the opcom cable interface. Not silly at all.
Thank you for your help I think I should be able to find a way to get security code without spending money hopefully
There is a way with opcom however u need a certain release which is hard to get!
Hi Tom can you recomend where to get a good opcom from please mate either ebay or local uk I’m in East Yorkshire thanks Tom
EBay reputable seller is your best bet!
Unfortunately you can’t program newer bcm’s using opcom anymore. There was a issue with the bcm bricking under certain conditions nothing to do with opcom silly things like changing the battery or jump starting. Vauxhall revised the bcm to prevent this and now the knock on affect is tech2 only. You can change the bcm to a older one but the cost of programming via tech2 and the risk of it bricking. There’s a guy out there on the Vauxhall forums he’s a bit of a legend like the A-team just ask around
I havent had any issues at all programming bcms, what year is this from?
If you use OpCom 150406, VauxCom 160115a or OpCom 170823c you have excellent access to all the modules on the Corsa D. However, some BCMs are locked and can not be programmed, even by the dealer with Tech2, so check you can change the variant coding BEFORE running any wiring.
Where did you buy opcom
whats a good Opcom unit Thanks regards from Holland
If you google opcom, you can buy the official one. However if you are cheap like me, use Ebay and type opcom and you get a clone version. Still work fine though.
i gett a chinees one for that one time youse Thanks mate have a nice day 2
Whats the one you have do you have a link from Ebay
It was a while ago i bought mine, about two year. But most of the people on ebay are fine to buy from.
where did you get the clone of the OPCOM from Tom?
I got it off a reputable Ebay seller, its a china clone one.
Hi there how do I get my stereo code it keeps displaying safe mode I’ve got op com but don’t no how to do it can you help please corsa d VXR. Cd 30 mp3 thank you 👍🏼
Vauxhall corsa d's do not have radio codes. They are linked to the display in the vehicle. You can unpair them using opcom.
Hi mate
Do you know of any places that will programme cruise control for me, I’ve already installed the new stalk
Cheers
I dont really sorry, I guess vauxhall could but I wouldnt really recommend them for the price.
Tom's Driveway No problem mate thanks anyway
Which version of firmware did you use? 1.65?
I'm using 1.64v close enough
Hi tom how much to programme mine in it’s all wired in
hi, i have to change the speedometer of my opel corsa D, how can i program the new speedometer on my car with op-com?

You have tonuse this to use it?
Witch version of Windows did you used to install OpCom?
It is windows 10 64 bit, can be awkward sometimes to install post windows xp.
I ask you about that because i ordered 2 times from different buyers from Aliexpress the opcom but the Windows10 can not recognise the interface...can you write me the seller name from witch you got the opcom..thanks !
I bought mine off Ebay, it was over a year ago i purchased it so i no longer have it. I did have issues myself with win10 but with fiddling i got it to work.
I try to find one on ebay but all of them witch i find Working only with Win7 or XP.....
Tbh they will work with win 10 but its just awkward, the driver for the interface u have to install in a certain way.
Any idea where I can buy the cruise control module?
Ebay
Can you give me a link we’re to find the opcom? As I don’t won’t to get the wrong one. Thx
I downlaoded it here : diagopcom.blogspot.com/p/telecharger-opcom.html. But I still didn't check it on my car.
How can I check the model of my car? The one that is noted [A11AAA]? And also, how can I know the security code that is requested in the program?
The security code comes in the cars paperwork, sometimes called a vauxhall pass. If lost you have to buy from dealer. As for the engine number its on the block near the oil dipstick
Yes, the model is in the car's papers, but I didn't find the code. But I can read on some forums that we cannot enter in the BCM menu because it's bridated. Is it a link with the code that I can't find? And what's the name of the document where you found the code? Thanks.
I had to buy my security code from vauxhall, the code is individual to you car. And is hardcoded in.
That is true though, somw bcms cannot be reprogrammed howevwr i have tested/ have much knowledge on that to comment.
I saw on a video the car pass what you are talking in the video. But on my opel in Belgium, I don't have it. Then how do you know if your BCM can be programmed or not? What do you think about this video to get the code? ruclips.net/video/grhJ4nARJkY/видео.html.
Hi, can I pay you to do this for me? I got a 2013 Vauxhall Corsa... I'm in Birmingham but I can bring the car to you.
Can you add old text for Turkish expression?
I moved my obd port :) my bracket was broken where sits in
Hi I have a problem with my cruise control I did everything how you show but doesn’t work
Im not sure how i can assist you bud, there are so many factors. Tell me what u did first?
Tom's Driveway I did it it was from the wire I build it and it’s ok now
Sweet, well done. Glad the video helped!
This opcom 1.99?
Hello again,
I installed the comodo. And my car has already the cable. Fortunately! But the dealership told me that I could burn out the on-board computer when I change the programming. Does anyone has already that problem?
I've heard of people saying this but not seen anyone with a broken one yet...
Same steps as on Corsa c ?
Basically exactly the same yeah, they are the same engines
Tom's Driveway finished it ! Thanks
Well done thats brilliant news!! Im so happy for you.
Finnaly, with your version, I can communicate with my car. So happy. But I don't have the correct engine in the list. Has anyone chosen a similar? Was it working? In my case, I have a A13DTE engine. Which should I choose?
Ayyy nice, I would just test see if i can communicate with engine ECU if so cool if not well shame.
I'm still thinking abou this problem. Does anyone have a solution?
Can you activate the trip computer with Opcom
Im not sure what you mean sorry?
@@TomsDriveway This video of yours answers my question, ruclips.net/video/_Qsxb-3apH/видео.html
The stupid metal bracket that goes around the obd port prevents me from plugging in my device 😠
How much would u charge to do this to a corsa d
To program it, depends if you just wanted it programming. £10.00 i guess. To run the wire and program i guess £40.00. Idk really hard to quantify the price.
I’ll find out today if my car already runs the wire as mines a club we’re are u based in the uk ?
@@tiktokshorts7727 Leeds
Tom's Driveway would it all be able to be done in one day as I’ll come down from Birmingham to have it done
Yeah it could be done in a day providing you have the security code, the stalk. The brake/clutch switch is there. But with it bein club its likely. Even better if the wire is already there
I sorta underestimated what is required for the job, so it will be more expensive. But if your interested. Here is my email tjogrady@hotmail.co.uk
where do you get the programming code?
Hey Shandy, you find it in your owners manual with your vauxhall. However if you cant find like mine, you have to go to a vauxhall dealership with your v5 and i think £30 it costed me and they will get it you.
Rediculous the price but only way to get it!
Many thanks, are you talking about the "car pass" my car did not come
withi it! I was worried about the radio code but from what I can gather
the Corsas dont have one. The garage I bought it from said the radio
did not have a code but he didnt seem too sure.
I am indeed talking about the vauxhall car pass.
No need to worry about radio as its linked to the clock, as im sure you know already.
But to program you need the sevurity code off the vauxhall pass unfortunately.
how do you use the the cruise control?
Twist the end of the stalk forward to turn on the cruise control, press the button on the end if you want to turn off the cruise control. Twist backwards to reduce the speed or twist forward to increase the speed.
Tom's Driveway great! Thanks for the quick reply!!
Happy to help, if you need to know anything else about a corsa or vauxhalls for that matter im always here!
I appreciate it! I have subscribed so I'll come back with questions haha. takecare
Thank you, sure!
Hello please version ?
Anyone near Birmingham have opcom and fancy earning a few quid switching cruise control on for me?
Hi friend, i tried, but at minute 1.04 i can’t because when i push there is an error. Can you help me? Can you give me your email so i can send you some pictures of This problem? Thank you
How do I get a security code?
You have to take your v5 to the vauxhall dealership with £30 and they will get it for you. Thats is you dont have it already in your car booklet thing.
Tom's Driveway thanks I’ll look now 👍🏻
Hi, thanks for your videos.. I already have clutch switch and the bcm to steering column cable. But I can't program my bcm. Cruise control voice is "Not available". Do you know how to fix? I already use the same opcom release, with 1.59 fw.
I've a different bcm, with code 13142240 (corsa d my07).
Thanks in advice, cheers..
Sorry for slow reply, hmm sounds strange. Only thing i can suggest is there a way you can get a newer opcom release. I recall i had issues finding it orignally. As mine is china clone.
Tom's Driveway I also tried with tech2 (in Opel official service) and I can confirm that I've some limitation in my bcm. Talking with mechanic, he tell me that Corsa D with enjoy equipment can't add some feature (like cruise control or rain/light sensor) because Opel/Vauxhall limit bcm.
I can only try to change it, but I don't know if made it worth to try..
Thanks again for the reply :)
Yeah that is true that some bcms do have limitations. Tbh im not sure if changing your bcm is worth it. Out of interest what model of corsa d do you have. Mine is life.
Mine is enjoy. Opel use a different equipment name, but I think that we have the same equipment (with different bcm)...
mondyx92 yeah opel must do as i am not too familar with that model name. But as you say they are the same equipment
I'm in Belgium. Someone know which version of OP-COM I have to install for my Corsa-D of 2010? On the CD, I have these versions :
090820b
090420 (For De : Germany)
081016 (Activation by mail needed)
08-2010 (China Clone)
2012 (doesn't work)
120309 (Vaux-Com + China)
100219 (without drivers)
120309 I think would work
@@TomsDriveway, even if it's for China and Vaux-hall, and I an opel with the steering wheel on the left side?
Yeah they are made in China anyways, yeah that shouldn't matter
@@TomsDrivewayOk thanks! The format of the version number is year-month-day: yymmdd? Than, the oldest should be 081016?
Tbh I'd just try them? Experiment. I didnt even know that tbh educating me Haha.
Привет бро ,сенкью вери мач за обзор .
How to hack your car.
Dafuq