Nice little amp! I have a hifonics THETA 1200.1 on a BT speaker i built..Its pushing 2 genius nitro 6 inch subs..Its like the perfect combination for the subs..Ive always been a fan of budget equipment..I will have to keep an eye out for these and the price for the whole new line up
I was trying to find some updates on Hifonics about a month ago and never found what I was looking for.... I ended up going with Lanzar MPD subs 1x 15 2x 12s 2x 8s... I'm probably going to add some 6.5s in the kick and bullet tweets overhead... Everything is in a 2000 Honda Accord (sedan). 15" is Free-Air 12s sealed and 8s tune port.
Are you willing to test my Memphis viv3000.1v2 sixfive series amp ? I'm curious to know what it actually puts out at 4,2,1 ohm. Also how many amps it pulls at 4,2,1 ohms
I am trying to run a sundown SFB-3000d in my house, does anyone know how many amps the power supply would have to be able to supply for this amp to work?
Volts x amps = watts. Having any 2 of the 3 variables in this equation will allow you to find the third. Example: 12 volts x undetermined amps = 3000w To find amps divide known wattage by known voltage. 3000w÷12v= 250a. No amplifier is 100% efficient so this amperage number will no be sufficient to achieve full output. To find the actual value needed get the efficiency % of your amplifier from sundown. Once efficiency is known, say 80% for example, you know that you have a 20% loss. To regain this 20% multiply calculated amperage by 120%. 250a x 120%= 300a needed. Be aware that many quality amplifiers exceed advertised ratings by 20% or more, in such a case one should use 140% in the final calculation if actual maximum amplifier output is desired.
Disappointing 1 ohm performance. Awesome 2/4 ohm clean performance. However, I’m curious how this amp performs at like 12.5amps also what if anything happens at say .8/.67 ohms. 🎉 cheers
Good morning friend, I would like you to carry out some tests on the Colossua Mini 4-channel models. I need an amplifier that gives me real RMS to connect 8 mid-ranges of 100 RMS each, 2 per channel.
Too bad you didn't test the 3k version. Does the protection circuit limit this amp to 887 at 1ohm no matter the electrical you have? So ill asume the 3k makes like around 2500 certified. Or does it acually hit the dynamic numbers playing music and make more?
I haven't watched in a while I'll admit but why did you sell out and The Dino that was one of the things that attracted me to your channel is you were not doing what everybody else is doing
What you mean?, dude is doing EXACTLY what everyone else is doing. You must be referring to the SMD AD-1?.. I don't see why 'upgrading' or 'replacing' a Dyno should affect your viewing pleasure. If it does?, then that's a "YOU" problem lol
Times have changed….These amp dynos are exactly what is needed to restore balance 😎
Happy Father's day to all the Father's watching 🎉 Be proud Kings 🤴
Ive always liked Hifonics 👍🏻
Glad they're coming back strong
Congrats on the new dyno bro and happy Father's day.
Thanks you so much brother I hope you had a great one as well!
Nice little amp! I have a hifonics THETA 1200.1 on a BT speaker i built..Its pushing 2 genius nitro 6 inch subs..Its like the perfect combination for the subs..Ive always been a fan of budget equipment..I will have to keep an eye out for these and the price for the whole new line up
I don't think ive seen a amp that small with a clip light, that's awesome
Thank you, great little amp!
Appreciate it!
Does anyone remember the USA Acoustic amps?
Every amp should have a clip indicator (Cough cough Kicker... SMH)
I have this amp in the 4 channel 2000 watt. I’d love to see how it do on the dyno
I was trying to find some updates on Hifonics about a month ago and never found what I was looking for.... I ended up going with Lanzar MPD subs 1x 15 2x 12s 2x 8s... I'm probably going to add some 6.5s in the kick and bullet tweets overhead... Everything is in a 2000 Honda Accord (sedan). 15" is Free-Air 12s sealed and 8s tune port.
Are you willing to test my Memphis viv3000.1v2 sixfive series amp ? I'm curious to know what it actually puts out at 4,2,1 ohm. Also how many amps it pulls at 4,2,1 ohms
I am trying to run a sundown SFB-3000d in my house, does anyone know how many amps the power supply would have to be able to supply for this amp to work?
Volts x amps = watts.
Having any 2 of the 3 variables in this equation will allow you to find the third.
Example:
12 volts x undetermined amps = 3000w
To find amps divide known wattage by known voltage. 3000w÷12v= 250a.
No amplifier is 100% efficient so this amperage number will no be sufficient to achieve full output. To find the actual value needed get the efficiency % of your amplifier from sundown.
Once efficiency is known, say 80% for example, you know that you have a 20% loss. To regain this 20% multiply calculated amperage by 120%.
250a x 120%= 300a needed.
Be aware that many quality amplifiers exceed advertised ratings by 20% or more, in such a case one should use 140% in the final calculation if actual maximum amplifier output is desired.
Disappointing 1 ohm performance. Awesome 2/4 ohm clean performance. However, I’m curious how this amp performs at like 12.5amps also what if anything happens at say .8/.67 ohms. 🎉 cheers
Good morning friend, I would like you to carry out some tests on the Colossua Mini 4-channel models. I need an amplifier that gives me real RMS to connect 8 mid-ranges of 100 RMS each, 2 per channel.
I will keep that in mind
Too bad you didn't test the 3k version. Does the protection circuit limit this amp to 887 at 1ohm no matter the electrical you have? So ill asume the 3k makes like around 2500 certified. Or does it acually hit the dynamic numbers playing music and make more?
Sweet. Where are you located?
Good morning...friend, I would like you to test the hifonics colossus 800.4 amplifier, what is its real power?
Nice
👍👍👍...🍻🍻🍻
I haven't watched in a while I'll admit but why did you sell out and The Dino that was one of the things that attracted me to your channel is you were not doing what everybody else is doing
What you mean?, dude is doing EXACTLY what everyone else is doing. You must be referring to the SMD AD-1?.. I don't see why 'upgrading' or 'replacing' a Dyno should affect your viewing pleasure. If it does?, then that's a "YOU" problem lol
Bitchin' little amp!
👍👀👍
Ola
Should have ran it 1/2 ohm 🤫🫡