Wonderful tutorial. Thank you! The ear part had me concerned but I figured it out. I used a Qualatex 260Q balloon for mine. Ensure the balloon has been well stretched and not plump/overfull with air. The ears should twist with some effort. My daughter lit up when she saw her bear. She is Autistic and loves the Gummy Bear song. I made a translucent green one and it looked just like a gummy bear. The feel of the smooth bear is comforting as well.
I just learned how to make balloon animals today by a man named Dimitri and he is amazing. He taught me all the right stuff and all the road so I wanted to learn myself. Your channel is amazing.
I couldn't understand a word she said, but I can see how she did it. She probably can't understand me either but - thank you for sharing this excellent video! Also, the English subtitles will help if I need them.
My first few tries popped but in the end it turned out really well. Your instructions are very clear and easy to follow. I'm pretty sure it only popped because I used the type of balloon and I just tried making balloon animals today for the first time and I only have one type of balloon but your video was great.
I failed twice before almost getting it the third time. My balloons are just too short!! So i didn't have enough for the second 8cm bubble at the end :< My green balloon bear is still cute though!!
Either I’m bad, or the instructions aren’t slow enough but I’ve found that every balloon I’ve done has failed and they’re all from this specific channel. I do loose my patience quite quickly but I’m confused on how many bubbles there should be.
The length of the balloons may vary slightly depending on the manufacturing company. Maybe the balloons you are using are the short ones. In that case, please inflate the balloon to a shorter length. Then try to make all the bubbles a little shorter.
Oi amigos brasileiros que estão lendo esse comentário , cara , vou te falar uma coisa , o trenzin complicado de fazer viu , o tutorial e muito bom , mais e muito difícil , minha cabeça ta explodindo aqui 😢😢
You can watch this video with English subtitles. Please use the subtitle function on RUclips.
Not needed when perfectly shown each step..First time modeling balloons and easy to follow..Loved it!
Ok
Thank youu❤❤
昨日バルーンアートを始めたばかりでできるか不安でしたが、1回ですんなり出来たので（最後の1周回すところ以外）良かったし、度胸がついて良かったです！
Tried for ten minutes and ended up popping it out of frustrations round 1 and a half minutes in :)
Yeah me too
Just goes too quick it’s an awful video
Me too😢
I tried it and it just explode how is this Beginner?
Wonderful tutorial. Thank you! The ear part had me concerned but I figured it out. I used a Qualatex 260Q balloon for mine. Ensure the balloon has been well stretched and not plump/overfull with air. The ears should twist with some effort. My daughter lit up when she saw her bear. She is Autistic and loves the Gummy Bear song. I made a translucent green one and it looked just like a gummy bear. The feel of the smooth bear is comforting as well.
I’ve been making ballon animals since yesterday, your tutorials made it so easy to learn!
I just learned how to make balloon animals today by a man named Dimitri and he is amazing. He taught me all the right stuff and all the road so I wanted to learn myself. Your channel is amazing.
The utter DETERMINATION I had to make this…it took me AN HOUR and three balloons later I finally did it omg-great tutorial!!!
Thank you so much for sharing your knowledge with us. Every step is very very clear and the bear turned out amazing!! Thank you so much❤
after failing 4 times in a row i finally got a pink bear on my fifth try TwT never been so proud of myself like i am rn
At first u thought that this is very hard but when I tried it, it was very easy and fast and was easy to make I liked this idea thx for telling 👍👍👍👍
Thank you for making it 😄✨
巨根クマから来ました
本来はこうなるはずなんですね
なるほど
Finally! I can do a proper bear body. Thank you so much!!!
PS: the music slaps!
😊👍👍✨
I couldn't understand a word she said, but I can see how she did it. She probably can't understand me either but - thank you for sharing this excellent video! Also, the English subtitles will help if I need them.
Thank you! I'm glad you liked my videos😄
It was little bit hard in the head part, but result made me smile.😊❤
Thanks so much for every single tutorial♥️♥️♥️👏🏽👏🏽👏🏽👏🏽
スゲー！本当にかわいい！
Thank you for this tutorial. It is easy to follow and the step by step visuals are really clear.
Thank you for sharing your knowledge with us
I’m flattered that you like my video! Thank you😊👍✨
I love this video its just the AI narrator thing
My first few tries popped but in the end it turned out really well. Your instructions are very clear and easy to follow. I'm pretty sure it only popped because I used the type of balloon and I just tried making balloon animals today for the first time and I only have one type of balloon but your video was great.
(メモ)
6・6・7・3・5・3・7・ひねり合わせる鼻を輪っかに入れる･両耳ひねる･顔完成･6を4つつくる･首ひねる･8･お腹に通す･8･元の位置に絡める
Your tutorial is great. Thanks for your sharing
I like bears
😊👍✨🐻
This is literally so adorable 😍😍
It looks amazing. Thank you for sharing🤍
Just realized my new hidden talent
I failed twice before almost getting it the third time. My balloons are just too short!! So i didn't have enough for the second 8cm bubble at the end :< My green balloon bear is still cute though!!
Blue balloon
動画だとバブルの空気圧の調整具合とかわ、すごくわかりやすいです。ありがとうございます！
かわいい🎀
Very nice!
Thank you!😊✨
Lol
This looks great
For my first try its not that bad, so keep trying untill you make it!
Very well explained!
Nice job
Either I’m bad, or the instructions aren’t slow enough but I’ve found that every balloon I’ve done has failed and they’re all from this specific channel.
I do loose my patience quite quickly but I’m confused on how many bubbles there should be.
I tried it came out really well
Thank you for making it🥰
How come the air didn't reach till the end of the ballon as you were squeezing it.
Thank you for tut!
You are welcome🤩✨
THANK YOU SO MUCH
The middle part to my bears body popped (blew it up a little to much) but its ok now it s a handy dandy bracelet. Haha
This was so helpfull thx
Can you make a BTS lightstick out of balloons? Please 🥺? Im subscribed.
So like. My balloon untwists everytime I try to make a bubble
SAME
I love it
thank you so much for your videos!! they are so so helpful
So good😊
You can slowdown the video speed in settings while watching, rubbing ballon’s together too hard or too fast causes friction and makes them pop
I love the body on this design! So cute
Thank you!✨✨
หมีน้อย น่ารัก
Thank you!☺
How is this for beginners
I just started balloon animals and this my 4th animal I moved too within 1 hour of learning this stuff easy peesy
I keep trying it but when I twist the entire balloon becomes full with qir
So I don't have anything to deflate and tie the bear of at the end
The length of the balloons may vary slightly depending on the manufacturing company. Maybe the balloons you are using are the short ones. In that case, please inflate the balloon to a shorter length. Then try to make all the bubbles a little shorter.
@@IsopressoBalloon ok thanks will try again:]
@@IsopressoBalloon I finally got it!!!!! ❤ thanks!!
Its soooooo cute. It turned out very well. :)
Glad it worked out🥰
Can you make disney princesses too ❤
Wow, my balloon is terrible, it always untwists after I’m done a step
Make sure u hold the beginning of a line of twists unless the twist is locked
my balloon is not ballooning like that
Wow man cool
Thank you😊✨
your hands are so beautiful
why our balons are shorts?
The head is the same as other bears, but the body is much easier.
Can you please make a video of deer using the balloon
great !😙
Amazing 🤩
Thank you👍✨
So cute
It turned out pretty good I will leave a like and sub thanks
I'm glad I could help you🥰
sub titles are on - but nothing is happening
After my 2 try I was able to do it on my 3rd one
🥰👍✨
Did it . Really cool but for me the cm didn't work for me . But i did it
I have never made a teddy bear
Super
Thank you!
nice 👍
That SCP u don’t want to cross in the facility
風船がわれたwww
ドンマイです🙃
自分用:+12cm
Nice
Thank you!
Lov it❤
うぽつです！手足がくっつく型のくまさんもかわいいですね！(*´∇｀*)
ありがとうございます(*´◒`*) クマさんは色んなパターンがありますよね😊
Wow I want it one pls ❤
So cuttee
Cool
I tried to make this and it popped and it was so loud and it was the middle of me making it my right ear was ringing😂
beginers my arse, this is so hard
Cute but hard to make
First time I build this I afraid to twist the ear. I afraid the balloon is💥💥💥
❤🐻 🎈
余ったやつを尻尾みたいにしてたなぁ
切り取らずに尻尾にする方法も良いですね😊
Holaa
❤❤❤
Arigato kusaimas
Oi amigos brasileiros que estão lendo esse comentário , cara , vou te falar uma coisa , o trenzin complicado de fazer viu , o tutorial e muito bom , mais e muito difícil , minha cabeça ta explodindo aqui 😢😢
i no doing it , it soooo HARD
it's too hard!!!!😣
😃😃😃👍👍👍👍👍👍👍👍👍👍👍👏👏👍👍👍👍
6cm, 6cm , 7cm ,3cm, 5cm, 3cm, 7cm ur welcome
No manches yo pensé que estaba en español XD
🎉🎉🎉❤😅
Türk olan var mı
割れた
Welcome to my home
Yasssssssa
My balloon popped :) for 4 times
very hard o.o