9-21-2023: Awesome. Thanks for creating and publishing this very well done informative how-to video. Extremely helpful. Are you able to provide your source for the grille replacement? Thank you.
I have a question regarding the front part, is it possible if you can drop it only one inch, without having to mess with the coil overs and springs just leaving it on a stocked shock??
I don't really see a way to drop the front at all without replacing the springs. The Belltech kit comes with a lot of shims that allow you to choose your drop up front, max of 3". You may be able to buy just the front end parts directly from them.
Is there enough room with the radiator cover off and top grille nuts removed to get your hands in to just remove the GMC emblem? I am looking at replacing the Standard Red / Chrome GMC logo with a Black / Chrome on my 2019 Canyon Denali. Thanks for your video
Thanks for your view! I would think you could do that...there's actually a decent amount of space once you take that first shroud panel off. If not you could remove the top grille screws and gently pull it back enough for access. Good luck!
As good as its gonna get! I can see fairly well through it, just can't read or see fine detail, but it's hardly a hindrance in my daily life. Thanks for your support!
I recommend checking out Fondupot Garage's video for more detailed tool info! He is a little more comprehensive than me. ruclips.net/video/Ym0t2jjJKIU/видео.htmlsi=fOc30OC3zI4ce7Oq
Why is the Stock Grill SO DIFFICULT And just doesn’t want to let go!!?? It is hands down the hardest mod I’ve done! I have lifted three trucks myself. THAT was easier than this piece of crap stock one
It is tricky!! I think the key is keeping the constant pressure as you pop each clip. If you don't, the clips are so strong they will just snap right back in to place
@@BarelyBuiltRight You are a VERY patient to answer my question. Your response offered me to see how Rushed I was being with this job...Also, the 109F didnt help! *NOTE the included badge plate kit to install the GMC logo? The screws were half the size too small I used self tappers.
And to the rear. Installing a rear LED sequential tail light bar WITHOUT a wired trailer hookup(*Add $75-$140 uninstalled) is not available on RUclips! I mean crap anyone can marry up wire for wire on a seven (round) trailer plug! So until someone go figures out how to do this with resistors and a crossover box. We are left with having to do the former first. Or saying forgetaboutit
Nice job but that's the worse bumper I ever saw! Not impressed with GMC I would have to switch that out for a welded bumper and bully or brush guard. My F150 has metal bumper but I would love to have the new Raptor grill and a welded bumper and brush guard installed.
Hm… ya start the video with the front already removed. Sure would be helpful if it showed what you have to do to get to the grill rather than starting the video after that part is already done. That’s actually the the hardest part of replacing the grill. Pretty weak.
9-21-2023: Awesome. Thanks for creating and publishing this very well done informative how-to video. Extremely helpful. Are you able to provide your source for the grille replacement? Thank you.
Here you go! Thanks for the support! ebay.us/W9hjLH
Cool video, I saw you stopped at a light and saw your decal on your rear window.
Hell yeah! Thanks! Feel free to take a look around the channel. Appreciate the support
Hey bro I have a 2019 canyon sle. Will the grill for a 2018 fit fine or are they different?
I think it should be fine! As long as it is the same generation
I have a question regarding the front part, is it possible if you can drop it only one inch, without having to mess with the coil overs and springs just leaving it on a stocked shock??
I don't really see a way to drop the front at all without replacing the springs. The Belltech kit comes with a lot of shims that allow you to choose your drop up front, max of 3". You may be able to buy just the front end parts directly from them.
Is there enough room with the radiator cover off and top grille nuts removed to get your hands in to just remove the GMC emblem? I am looking at replacing the Standard Red / Chrome GMC logo with a Black / Chrome on my 2019 Canyon Denali. Thanks for your video
Thanks for your view! I would think you could do that...there's actually a decent amount of space once you take that first shroud panel off. If not you could remove the top grille screws and gently pull it back enough for access. Good luck!
Nice job! Looks awesome!
Thank you!
How is the eye today brother? Love your content.
As good as its gonna get! I can see fairly well through it, just can't read or see fine detail, but it's hardly a hindrance in my daily life. Thanks for your support!
Thanks, very helpful.
Happy to help! Thanks for your view
Do you know what type of led light will fit to replace the light in the anzo headlight
I don't off hand, but if you remove the actual bulbs it should be imprinted with which bulbs they are. Then you can look up "bulb XX LED" or similar
How do you put the gmc emblem on the aftermarket grille
The grille I bought came with a backer plate that you can attach the OEM emblem too. Can be mounted anywhere in the honeycomb
Happy your my neighbor
Hell yeah!! 😎😎
What tools do you need for this
I recommend checking out Fondupot Garage's video for more detailed tool info! He is a little more comprehensive than me.
ruclips.net/video/Ym0t2jjJKIU/видео.htmlsi=fOc30OC3zI4ce7Oq
What headlights are those ?
Anzo. You can find them here:
ebay.us/HBs5Ov
sweet
Post more
Appreciate the encouragement! Haha. Are you looking for more canyon-specific content or just in general?
Why is the Stock Grill SO DIFFICULT And just doesn’t want to let go!!?? It is hands down the hardest mod I’ve done! I have lifted three trucks myself. THAT was easier than this piece of crap stock one
It is tricky!! I think the key is keeping the constant pressure as you pop each clip. If you don't, the clips are so strong they will just snap right back in to place
@@BarelyBuiltRight You are a VERY patient to answer my question. Your response offered me to see how Rushed I was being with this job...Also, the 109F didnt help! *NOTE the included badge plate kit to install the GMC logo? The screws were half the size too small I used self tappers.
And to the rear. Installing a rear LED sequential tail light bar WITHOUT a wired trailer hookup(*Add $75-$140 uninstalled) is not available on RUclips! I mean crap anyone can marry up wire for wire on a seven (round) trailer plug! So until someone go figures out how to do this with resistors and a crossover box. We are left with having to do the former first. Or saying forgetaboutit
Nice job but that's the worse bumper I ever saw! Not impressed with GMC I would have to switch that out for a welded bumper and bully or brush guard. My F150 has metal bumper but I would love to have the new Raptor grill and a welded bumper and brush guard installed.
It’s a piece of shit. Correct!
Hm… ya start the video with the front already removed. Sure would be helpful if it showed what you have to do to get to the grill rather than starting the video after that part is already done. That’s actually the the hardest part of replacing the grill.
Pretty weak.
You sure you didn't accidentally skip ahead? The first 1:55 is all the steps to remove the bumper....
Ok that looks Horrible as fuck😢😢😢