Excellent work! I have also improved the plinth. Look for the UK made The Audiofiles RigB for the AT3600/AT91, change out the plastic holder. Then order the elliptical stylus upgrade. The sound can be better than many ridiculously expensive turntable.
Thanks, how would you change out the plastic holder and with what? I have the vm95e a.t. on my systemdek table and it works quite well. Someday i may upgrade the stylist.
Very nice. My story: An old Trio MC cartridged linear tracking turntable I'd been using had recently stopped functioning properly so I bought my old CS 505-1 down from the loft. That had also ceased working about twenty years ago! After a good old RUclips search I squirted some juice into the microswitch and Hey! Presto! etc. It sounded so good that I went and picked up a non-functioning version 3 because I preferred the look of the (crappy mdf veneered) plinth. Managed to get that working too in ten minutes although the arm needs a good look at. These are still seriously decent and musical sounding turntables even when stylii and whatnot are a bit worn out. They all deserve a decent plinth like the one you've made Alexandre! Reckon I might have a go at making one in hardwood.
Hi Graeme Dual turntables are good but the mechanism need regular service (if not use for some time) to keep them going. But if you use the turntable regularly then would work fine. I just did a nice wood plinth for a Dual CS505-3 like yours. Take a look ruclips.net/video/rSRgPCcLGtM/видео.html On my Instagram I have the all process. I kept the original plastic base to be able to use the transit screws.
Love this. I have an old 505-2 and it sounds so good but it's the ugly plastic version. I would so want a wood surround like yours but have no woodwork skills. Can I easily (and I mean easily) swap out the insides and put them into a 505-3 wooden plinth? Or is one better just getting one made?
Yes you can use the wooden plinth from the 505-2 505-3 and 505-4 they all fit perfectly very easy to do. No skills needed just a screwdriver to remove one screw where's the cables lift the chassi and put it back in the wooden plinth. If you end up buying and need help let me know but I guarantee you is really easy. On ebay sometimes you can find the wooden plinth around £25 if you in UK
@@TheGramophoneGirl they all fit because the chassi springs are all locate in same place. But you can always send me the link of what you want buy and I have a look and see if will fit 👍
@@ianunes25 I think I'll stick with the 2, 3 and 4 wooden plinth search. I suppose I could always put their chassis in my plastic plinth and sell it for something. They're still good players and unbeatable for the money.
Yes true. This is a entry level turntable. Does the job for someone with low budget and the sound improved a lot with this plinth. The new owner is a happy guy and I am too very pleased to gave him the chance of having a nice deck for the money 👍
Excellent work! I have also improved the plinth. Look for the UK made The Audiofiles RigB for the AT3600/AT91, change out the plastic holder. Then order the elliptical stylus upgrade. The sound can be better than many ridiculously expensive turntable.
Thanks, how would you change out the plastic holder and with what? I have the vm95e a.t. on my systemdek table and it works quite well. Someday i may upgrade the stylist.
Very nice. My story: An old Trio MC cartridged linear tracking turntable I'd been using had recently stopped functioning properly so I bought my old CS 505-1 down from the loft. That had also ceased working about twenty years ago! After a good old RUclips search I squirted some juice into the microswitch and Hey! Presto! etc. It sounded so good that I went and picked up a non-functioning version 3 because I preferred the look of the (crappy mdf veneered) plinth. Managed to get that working too in ten minutes although the arm needs a good look at. These are still seriously decent and musical sounding turntables even when stylii and whatnot are a bit worn out. They all deserve a decent plinth like the one you've made Alexandre! Reckon I might have a go at making one in hardwood.
Hi Graeme
Dual turntables are good but the mechanism need regular service (if not use for some time) to keep them going. But if you use the turntable regularly then would work fine.
I just did a nice wood plinth for a Dual CS505-3 like yours.
Take a look ruclips.net/video/rSRgPCcLGtM/видео.html
On my Instagram I have the all process. I kept the original plastic base to be able to use the transit screws.
I love this sound
Very nice.👌
Nice. Good job. Now, I might do mine.
You can check all the process on my Instagram instagram.com/s/aGlnaGxpZ2h0OjE3OTYwNjE5MDc2NDI1MzUx?story_media_id=2622244790713748500_48428569842&
@@ianunes25 hiya, couldn't open the link. whats your IG-handle? Looking to make such a thing for my friend. very beautiful!
That little A.T. cartridge sounds like a five or six hundred dollar cart.
It's really impressive how a £15 cartridge with a conical stylus sounds so good indeed.
What kind of wood and color is this? Awesome plinth
Love this. I have an old 505-2 and it sounds so good but it's the ugly plastic version. I would so want a wood surround like yours but have no woodwork skills. Can I easily (and I mean easily) swap out the insides and put them into a 505-3 wooden plinth? Or is one better just getting one made?
Yes you can use the wooden plinth from the 505-2 505-3 and 505-4 they all fit perfectly very easy to do. No skills needed just a screwdriver to remove one screw where's the cables lift the chassi and put it back in the wooden plinth. If you end up buying and need help let me know but I guarantee you is really easy. On ebay sometimes you can find the wooden plinth around £25 if you in UK
@@ianunes25 Thanks. I'll have a look. I have see a lot of 505 plinths going cheap but I guess that's because they don't fit?
@@TheGramophoneGirl they all fit because the chassi springs are all locate in same place. But you can always send me the link of what you want buy and I have a look and see if will fit 👍
@@ianunes25 I think I'll stick with the 2, 3 and 4 wooden plinth search. I suppose I could always put their chassis in my plastic plinth and sell it for something. They're still good players and unbeatable for the money.
The plinth is incredible, the turntable not so much.
Yes true. This is a entry level turntable. Does the job for someone with low budget and the sound improved a lot with this plinth. The new owner is a happy guy and I am too very pleased to gave him the chance of having a nice deck for the money 👍
The turntable sounds fine
現在玩唱片都要配蠟燭？