You won't get exactly 12v in any situation. Because firstly, irradiance will vary and no panel can give 12 volts accurately. I suggest you to take a normal arrangement of 24v or something close to that and attach a buck Converter to it
Hello Can I ask ,I am a student and I made a simulation of solar powered vehicle using a PV array, Boost converter and DC motor. But the simulation result were wrong, that it gave a high amount of the output current as also the torque even though that the curve of speed is correct. Can you advice me what should I change!
hello can you please help me, i would like to design a pv array that gives 6 V input to the boost converter and the voltage is amplified to 12 V. The load is a 12 v dc motor
Great Question! That is maximum power point. So at maximum power point it will be at 27 V. Here despite it being stc ( 25deg and 1000 irradiance. the voltage and current are not at MPP. Refer to our MPP video to reach 27 V :D)
What is the value of inductor and capacitor
I want 12V input supply. Confusing PV array selection which model is good for 12V input..
You can custom you own PV panel!
@@TheUrbanScholar sir, don't know how to select Voc Vmp Isc Imp values.. I u post any video abt it
You won't get exactly 12v in any situation. Because firstly, irradiance will vary and no panel can give 12 volts accurately. I suggest you to take a normal arrangement of 24v or something close to that and attach a buck Converter to it
@@TheUrbanScholar👍👍thank u
how can we make simulation with pv of capacity of giving 25kw energy?
How select panel based on power input and output voltage.
Hello Can I ask ,I am a student and I made a simulation of solar powered vehicle using a PV array, Boost converter and DC motor. But the simulation result were wrong, that it gave a high amount of the output current as also the torque even though that the curve of speed is correct. Can you advice me what should I change!
hello can you please help me, i would like to design a pv array that gives 6 V input to the boost converter and the voltage is amplified to 12 V. The load is a 12 v dc motor
In 1:09 your showing one graph, in voltage valuse 27V but in last you getting 19V? How its change sir
Great Question! That is maximum power point. So at maximum power point it will be at 27 V. Here despite it being stc ( 25deg and 1000 irradiance. the voltage and current are not at MPP. Refer to our MPP video to reach 27 V :D)
Hye , how to change input voltage to 12V and get output 40 V
You can do so by changing the irradiance / pv panels :)
Sir, please what is the name of PD in the Simulink library
Do you mean PV? It stands for Photovoltaic and we use PV Array to simulate a PV system, do let us know if it solved your doubt 🙂
@@TheUrbanScholar no you connect a block at top with constant value 0.5. tell the name of that block
@@Engr.summaira.beenish. pwm generator (DC-DC)
Bcoz i need it for my project
I wanted a help from u for my project. Can u tell me how to contact u?