I am Algerian, I subscribe to your channel, because I saw your video and your way explanation, you are an exellent teacher, thank you very much for your frankness and simplicity. you deserve 1000 lik
Idea is good but there are several wires has to run between water tank and indicator.Is there any circuit which can work with maximum 3 wires between sensor and indicator indicating several depth of water level?
Sir fuel level indicator bna skte hn digits me ya analog me??? fuel level sender me ohms me reading aati hai 20 to 180 ohms ya 10 to 100 ohms ye 2 trha k hote hn. Mtlb koi aysi device jis se ohms value gira or display pr light ya digits bharte jaye
Good circuitry. Just that not sure if the contacts of the wire terminals when gets oxidized due the current flow could cause some issue or not. In such cases magnetic sealed contacts may have to be used.
Sir I am also interested to make it but can you please tell me that how ye connect 5V with resistance that is connect by a water tank... Can you please tell me how I connect it
@@RizwanAhmed-vj5xe ok sir lets see in diagram there 560k ohm resistance has two terminals, one is connected with postive vcc supply (5v) and on the other hand one terminal is connected with both water and pin no. 11,12,13.....individualy so thats behave like pull up resistor ,so its very simple process.thanks☺
I was viewing this vidio, although very old but I need it. Can we use 6v output transfer instead of 12v because we need only 5v and remaing power will be wasted in heat. Can we use mobile charger with 5v output.
First of all you are a good explainer. After watching this brilliant video, I have some question about this, If you do response or reply so i ask about it otherwise no problem..
I assembeled all the parts but only 6 level is displaying. I tried but not able to success fully.. Pleas guide. or can u supply PCP for the same. if yes details please.
I am staying at Gangtok Sikkim, where components like IC, pcb etc are not available for making the water level indicator. Can you please provide me the components on making the necessary payment. Thanks Umesh
Sir, l was build digital water level with ic 74LS147 & ic5411 but it could not work. Have any difference between the ic 74Hc 147&74Ls147 .pls write me the problem.
But the main problem will be the sedimentation or rust on the copper wire inside the tank as it will be there inside the tank overhead for 24 X 7 X 365. As far as the water container test is ok, but u have to think in a broader aspect in reality. So guys, before giving like, think about that.
hello sir kya aap fly sky transmitter fsct6b main noobes connection Bata sakte ho kk2.1.5 flight controller ke saath quad copter main camera lagane ke liye
Brother muje aap se ek hi information chaaheya k Arduino se RGB Led strips kitni jord sakte hai or Led ki patti ki wair uske Arduino me kha kha lgane hai mere paas 3 Rgb Strip lights hai or mai use room ki decoration k leya lgana chaahta hu . so I need help from you
My overhead water tank is 40 mtrs above ground level and I want level indication at ground floor. Will resistance of long wire affect the performance of circuit..?? Please reply
May 560k ka resister Ek lead label wayer ka sath connect kiya. .dusra leade direct 5v ka positive may connect kiya. Jab may negative ka wayer koy b label ka sath connect karega tho display cut hotha hay. .nae hay tho aisay display 0 pe rukthaa hay. Pls send the replay. .how to complete this project?
I made this project and I used more than 20 meters USB cabe from circuit to water tank. It is working. Thank you very much Mr. Praveen
Hello sir
I am Algerian, I subscribe to your channel, because I saw your video and your way explanation, you are an exellent teacher, thank you very much for your frankness and simplicity. you deserve 1000 lik
Very clear voice and circuit explaining method is awesome.
Sir your project and the way you're explaining was excellent.
Electrolysis is good for daily usage water ?. And what about electrodes by the electrolysis ?
Sir.. Kya isko pani ki tanki me lgani ho to isme koi chnaging krni pdegi
Idea is good but there are several wires has to run between water tank and indicator.Is there any circuit which can work with maximum 3 wires between sensor and indicator indicating several depth of water level?
Sir can we use 5v adapter directly instead of use transformer?
Sir fuel level indicator bna skte hn digits me ya analog me??? fuel level sender me ohms me reading aati hai 20 to 180 ohms ya 10 to 100 ohms ye 2 trha k hote hn. Mtlb koi aysi device jis se ohms value gira or display pr light ya digits bharte jaye
Har koi 560ohm ka resistors k dusre terminals ek saath short kark use 5v provide krna Hain Kya??
Mera bhi yahi sawal hey, par koyi jawab nahi mila.
@@bijuplavila3394 wahi to!🙃😗😗
Good circuitry. Just that not sure if the contacts of the wire terminals when gets oxidized due the current flow could cause some issue or not. In such cases magnetic sealed contacts may have to be used.
Circuit is perfect i made it it really works fine upto 20 meters lenghth of wire .👍👌
Sir I am also interested to make it but can you please tell me that how ye connect 5V with resistance that is connect by a water tank... Can you please tell me how I connect it
@@RizwanAhmed-vj5xe ok sir lets see in diagram there 560k ohm resistance has two terminals, one is connected with postive vcc supply (5v) and on the other hand one terminal is connected with both water and pin no. 11,12,13.....individualy so thats behave like pull up resistor ,so its very simple process.thanks☺
@@divyanshusharma807 Thanks for your reply Sir!
@@divyanshusharma807
My friend how much does parts of this project cost in $ ?😁😊
@@levelingup6711 in indian rupees it cost about 300 rs in dollars near about 6 dollars.
I was viewing this vidio, although very old but I need it. Can we use 6v output transfer instead of 12v because we need only 5v and remaing power will be wasted in heat. Can we use mobile charger with 5v output.
Sir water container me wire konsa use hoga.normal wire water me gal jata hain
main ne bc547 ka banaya hai us ki indicator ki light bohat kam hai.?
Could you please make a video while assembling the circuit
First of all you are a good explainer.
After watching this brilliant video, I have some question about this, If you do response or reply so i ask about it otherwise no problem..
I have assembled the circuit but it is not conducting in water, any suggestions
Sir
How can we design a circuit for intercom.
Door intercom with camera
Dear ! i made this project, i used SN74LS147, I coludn't get result... it show just one fix number 3 on common cathode. whats its solution kindly help
This video is good. But you must watch this one also: ruclips.net/video/IlLQ4ZxSNQo/видео.html
What happens if idont connect no 5 pin to ground?
Can u tell me how to make power supply 220v AC to 5v DC???
have you molasses level your indicator using . Very thiknas is molasses
Which place added led
74HC147 ic nahi mil rha hai iske jgha par koi aur ic btaye. Please
Is circuit ko kisi aur components se bnaye
How can I add buzzer in this circuit..the buzzer will help us shut down the motor when tank is full ..pls help me
If I want use common anode 7sagmint displays
Appreciate if you could publish circuit diagram schematic on description or screenshot on video.anyway great attempt.
Which software you are using to draw and simulate circuit.. please tell me
Overflowing पर pump auto off कैसे हो ओर क्या यह wireless बन सकता है?
74htc147 b use ho skta ha ?
Sir..what is the water sensor..used here??
Praveen ji.
Water level indicator ko aur aage badaana he toh connection kaise kare..? Indicator level 20 aur 30 tak leke jaana he..
Please reply me..?
12v nhee Diya input me.... 9v diya to hoga kaya
power ke liye transformer safe hai kya ? ya smps use karsakte ? agar fail ho gaya to direct power supply aaye ga ?
iske liye tranf- sahi hai , aur agr fail hoga too kuch bhi nahi aayega,.
Video मैं कौनसा software use किया है.... If anyone know plzzzz tell mi....
como esta mucho gusto me llamo jorge coto como hago para conectar otro display para medir mayor caudal o medir gasolina en un tanque
I assembeled all the parts but only 6 level is displaying. I tried but not able to success fully.. Pleas guide. or can u supply PCP for the same. if yes details please.
I am staying at Gangtok Sikkim, where components like IC, pcb etc are not available for making the water level indicator. Can you please provide me the components on making the necessary payment. Thanks Umesh
Hello Sir main directly 5v dc used kar sakta hu....i have powerbank .
This pcb available
Please add one more function as when tank is Empty it display as "E" , and when Tank is Full it display "F" .
Como faz isto??
Can we make it wire less?
sir bhilai mai koi batch start ho rhi hai kya.
sorry yar mai bhilai me nhi rhta aab
but aap bhilai mai sir koi watch start to kariye.
sir mai aap ka 2010 se join hu .
Sir, l was build digital water level with ic 74LS147 & ic5411 but it could not work. Have any difference between the ic 74Hc 147&74Ls147 .pls write me the problem.
Sir app ny Seven Segments ky upar kya lga ya hy Black box type ka? Yo ap ny Circuit digram mi nhi dykha ya hy....
560k ohm resistor ka ek side blue wire ke sath or dusra sira kesse connect krna hai
Printed circuit mil sakata ha kaya
Can we imply this project for very larger tanks in our home?????
Yes
Hi dear .. regarding tor the IC 74HC147 is there any other IC could be used instead of this ? Thanks
no
بشيب ابيك
Kya ye 70 meter wire lagne pe kaam karega
Can you please indicate the connection of positive and negative wires go to motor
Please reply as soon as possible. .coz I got this ic.., I don't know about this ic is suitable or not. Pls reply. I'm wtng!
Sir plz ek help chahiye....plz reply krna project fsa pda h...sara ckt okk h ...jaha base pr 10k resistor lgaya h ...waha 1 k nai ayega??
no
Hello sir, please don't mind....
Sir kya aap bata sakte hain, aap videos banane k liye kaun sa software use kerte hain
Thank you
POWER POINT
thank you
Electric N Electronic
Jaysingh Chauhan kindly send me link of this soft
Q
Perfect description bro.
nice graphic, kis software mai banaya hai ye graphic??
Hello sir aap apne channel mein kaunsa software used cart Ho
power point
sir 560 k0m pull up 5v dc power dena he ya nahi sir ?
Pull up resistor ka du.sra sira 5v posotive se ya negative se .
Kis se conect hoga plz batap
5V
@@praveendehari 5 v posotive ya negative
isme low buzzer high buzzer chai hei tho kaya karna hei
Sir ardiuno sewan sediment clock ke bare batay
Praveen ji kya aap mobile signal booster circuit diagram ka video upload kar saktey hai
yes
But the main problem will be the sedimentation or rust on the copper wire inside the tank as it will be there inside the tank overhead for 24 X 7 X 365. As far as the water container test is ok, but u have to think in a broader aspect in reality. So guys, before giving like, think about that.
Thank you brother, Kya ye Mobile phone per work karega? ya Iske liye laptop ya desktop lena hoga?
Hello sir! Can i replace 74hc147 with 74ls147? Does that make any change?
yes
@@praveendehari Can you tell me what changes does it make? Because we kept using the 74ls147 as an alternative, and our project still doesnt working
@@praveendehari sir where can i contact you? I need help
Hello sir esame jo 5v diya hai keval wale jagah par use kaha jodenge please 🙏🙏 bata dijiye sir samjh me nahi araha hai
hello sir kya aap fly sky transmitter fsct6b main noobes connection Bata sakte ho kk2.1.5 flight controller ke saath quad copter main camera lagane ke liye
Very excellent projict ❤❤❤
isme programming use Kota hai kya
no
Sir ye pull up resistor ka dosra sirra kaha par connect ho ga
5v ke sath
@@praveendehari 560k ohms k resistor ko 5v k sath series me connect karna hai ya parallel me
I m getting some issues while making projects
Itne wire tanki me kaun le jyega
Sir Please tell me are you used sensor or wires to drop in a tank .....????
only wire
Sir Maine Ye Project Banaya Hai Aur Work Bhi Kiya agar Meri Water Tank 4 th Flour Pr Hai To 20 Meter Lamba Wire Kaam Kargea Na ??
Brother muje aap se ek hi information chaaheya k Arduino se RGB Led strips kitni jord sakte hai or Led ki patti ki wair uske Arduino me kha kha lgane hai
mere paas 3 Rgb Strip lights hai or mai use room ki decoration k leya lgana chaahta hu .
so I need help from you
Sir,mujay yeh ic's nahi mil rahay ha mujay kaha milayie gay
My overhead water tank is 40 mtrs above ground level and I want level indication at ground floor. Will resistance of long wire affect the performance of circuit..?? Please reply
I am in same situation
Sir isme coding ki zarurat to nhi h
Hi praveen, if you have made PCB for this, can you please share the Gerber file
bro! can you make only with LED blubs indicators, with mobile charge DC
Hello sir, Sir kya aap bata sakte hain, k ic 74hc147 ki jaga ko see ic uas kar saktay hy pilz hilp Thank you, p ansir
Kya aap mujhay iska material provide karwa saktay ho
Hello sir
I have problem
I want to make water level indicator using 7 segment.
In this 74HC147 ic mil nahi pa rahi so Kya Kare.
iske bina too ye circuit kam nahi krega.
560k.O ka ras ka dusra point kha canekt ho ga?
sir mujhe microcontroller based project making sikhna h to please sir koi contect ya link ya address bta skte h jaha ye sikhaya jata ho
I did this circuit. .commen cathode is worcking. .bt just glowing. .560 k ka resister Muje samajnae aathaa hay..pls tell me how to connect this
It not working when i put connectors in water nothing happening. When i connect without water it work wtf?
May 560k ka resister Ek lead label wayer ka sath connect kiya. .dusra leade direct 5v ka positive may connect kiya. Jab may negative ka wayer koy b label ka sath connect karega tho display cut hotha hay. .nae hay tho aisay display 0 pe rukthaa hay. Pls send the replay. .how to complete this project?
shafi iv kallikkandy yaar plz meri b help kro.....mera only seven segmnt pr 9 hi show hora h baaki work nai krra
divyanshu sharma ..hi..soldering ka pehale breadboard par check karo. .hojayega
Sir if we use Common Anode 7 Segment display
I made this according to this digram but it didn't work why
It doesn't work with me why
Thanks sir. .now it's working very well..
Bhai Mera kaam Nahi Kar Raha hai
sir 74hc147D ya 74hc147E konsa use kia ha apny reply please
Apki vedio samaj ati hai achy tarha to plz mobile ya wifi jammr py vedio
Superb presentation with super idea
Aap yeh wala circuit banaiye sasta bhi hai aur aasan bhi: ruclips.net/video/IlLQ4ZxSNQo/видео.html
very simple explanation.good
Sir please reply. .second ic NO: HCF4511 is correct ic?
yes
Hello sir water auto on off ke liya board kaise design kare
Sir isme 9v battery aur 12v adaptor alag se use kar sakte hai ????
HAA KR SAKTE HAI.