Great video for freeze studies, I’m sure our molding techs used something like this to improve our cycle times. Obviously they never explained with this level of detail.
Thanks for watching & the support to the channel greatly appreciated.
17 дней назад
Why not do it backwards? Start at 2 on hold time and then go up in incriminates by one second.It’s slowing adding weight so to start high you could over fill your part and cause tool damage. I know that would be more shot size and pack that would over fill the part and somewhat transfer but wouldn’t it be safer to start low and then work your way up?
This is an excellent presentation. Appreciate your efforts to make me understand this important concept. However, I would like to know what are steps we can follow to reduce the cooling time.. Could you please suggest any advance modifications we can make in the mold to reduce the cooling time? Also what are the process variables for reducing cooling time
Yes, it still applies when you have valve gates. Open all gates at the same time. If NO valve gates, then you follow the steps the same way. Both will work. Thanks for the support to the channel & for watching as well. I will have new videos coming.
I have learned a lot over the years I worked as a Tech for 14 years I've learned Decouple 1 2 n 3 I've never used 3 but very important prob ( I suspect for medical ) needs to be right on , I've watched another video from you about Back Pressure Liked that video / What I want to know and probably other techs want to know is what is difference between different check valves / ball check ? I know when I say how much experience I got I still don't know Jack I want to keep learning Thank you I like your videos
Thanks so much for the kind words. I can do a video that shows the differences between the 2. There are some new designs that are out there that some companies use. I will try to get this done as soon as possible. Thanks for watching & the support to the channel.
@@injectionmoldingskillsmore1064 I'm not very good at home computers / but how do I get a hold of you with out putting myself on net I do not have tic toc either Id like to send you my E mail
Hi,
Great video,
I appreciate your generosity to share your knowledge.
Thanks.
My pleasure! Thanks for watching & the support to the channel I greatly appreciate it.
Informative , Fantastic , superb thank u
Thanks for the support to the channel.
Great video for freeze studies, I’m sure our molding techs used something like this to improve our cycle times. Obviously they never explained with this level of detail.
Thanks for watching & the support to the channel greatly appreciated.
You also want to maintain your cycle time during gate freeze great video thanks for sharing David
Thanks for watching
Really great stuff! Thank you for sharing your knowledge.
Thanks for watching & the support to the channel.
Góod video and very informative....
Thanks for watching & the support to the channel greatly appreciated.
Why not do it backwards? Start at 2 on hold time and then go up in incriminates by one second.It’s slowing adding weight so to start high you could over fill your part and cause tool damage. I know that would be more shot size and pack that would over fill the part and somewhat transfer but wouldn’t it be safer to start low and then work your way up?
This is an excellent presentation. Appreciate your efforts to make me understand this important concept.
However, I would like to know what are steps we can follow to reduce the cooling time.. Could you please suggest any advance modifications we can make in the mold to reduce the cooling time? Also what are the process variables for reducing cooling time
YES I can do something for you to show that. I appreciate the support & for you watching the videos.
Thanks for the explanation... And for hot runners how to proceed?
Thanks for watching
does this only apply when you aren't dealing with valve gates and nozzle drops?
Yes, it still applies when you have valve gates. Open all gates at the same time. If NO valve gates, then you follow the steps the same way. Both will work. Thanks for the support to the channel & for watching as well. I will have new videos coming.
Thanks for sharing this
Your welcome any time i can help. thanks for watching & the support
@@injectionmoldingskillsmore1064 Are you available on LinkedIn,if yes please share
@@himanshupanwar4330 Yes I am look under David Lucas
Sir what about the holding pressure during gate seal study.?
You leave the hold pressure the same don't touch. You only change the time. Thanks for watching & the support to the channel I greatly appreciate it.
Thank you sir
Thanks
I have learned a lot over the years I worked as a Tech for 14 years I've learned Decouple 1 2 n 3 I've never used 3 but very important prob ( I suspect for medical ) needs to be right on , I've watched another video from you about Back Pressure Liked that video / What I want to know and probably other techs want to know is what is difference between different check valves / ball check ? I know when I say how much experience I got I still don't know Jack I want to keep learning Thank you I like your videos
Thanks so much for the kind words. I can do a video that shows the differences between the 2. There are some new designs that are out there that some companies use. I will try to get this done as soon as possible. Thanks for watching & the support to the channel.
@@injectionmoldingskillsmore1064 Thanks Id love to see them
@@injectionmoldingskillsmore1064 I have a ton of questions for you
@@injectionmoldingskillsmore1064 I'm not very good at home computers / but how do I get a hold of you with out putting myself on net I do not have tic toc either Id like to send you my E mail