DIY Santa Maria Grill for the Weber - how to build one
HTML-код
- Опубликовано: 7 мар 2019
- I'm getting my welder out to build a Santa Maria style grill accessory for my Weber kettle. Just because I had the scrap metal around, and because I can. Enjoy a small project that made the kettle more versatile.
Наука
![Darren Waller - Who Knew (Her Perspective) [Official Video]](http://i.ytimg.com/vi/GytDjB8u6bM/mqdefault.jpg)
Genius! You should get a licence on this and sell it!
THAT IS AWESOME!! YOU MADE IT LOOK SO EASY!!!
Såg denna video efter flera andra och tänkte "Vilken tur att han gick över till Svenska". Sen såg jag att det var tvärtom. Du tjänar ingenting på att byta språk, den engelska marknaden är så övermättad så håll dig till det du behärskar. Kött och ditt eget språk. Förövrigt en väldigt informativ kanal, tack för flertal tips.
Hej! Det beror på vad man menar med "tjänar". Sen jag bytte språk är det många (väldigt många) fler som kommenterar och frågar, dvs mycket mer interaktivititet. Det är roligt och inspirerar till att göra fler videor. Roligt att höra att du uppskattar kanalen!
Very gr8 video!!! Ingenious even!!! Now I know I can make one of these if I can ever find a good used Weber 22 or 26" kettle!!! Thank you!!!
Good video! Thanks for posting
Love it! Great video.
Great video and idea from Tx
Hello from Cincinnati, Ohio. Nice job, man!
AK Boost BBQ Thank you, it was good fun building it!
That was awesome. Where can i buy one? I need one for my weber 57cm.
Snyggt! Blev ju väldigt likt den som jag skickade en videolänk till. Ser fram emot när du provkör den.
Snyggt jobbat Henrik 👍
Kent Nilsson Tack! Man kan göra rätt mycket även utan rörböjare och annat. Men får uppgradera maskinparken snart.
Thanks for the video. I made one more similar to gabby grill using the HVAC ring for the base. Everything else was pretty easy to make
Cool, it sure is a fun way to cook on a kettle.
Boss move right there... if you can make me 1 for my 24" Newport heavy duty grill that would awesome. Well done well done indeed...👏🏿👏🏿
Looks good and good job.
Kevin Cameron Thanks Kevin!
Great job!!
TaNgLeD2121 Thanks!
Well done sir.
Guillermo Paredes Thank you!
Ser bra ut Henrik! 👍😊
Fredrik Tengstam Tack Fredrik!
I like it!
Cool tutorial, Brother!
Mr. Bones BBQ Thanks my friend!
Juste bygge.
Styvsonen svetsar mycket så jag måste ta och lära mig grunden - och sen får jag ta mig an ett sånt här projekt👍🏻
Fortsätt med det du gör, bästa
mr Burns Tack!
Enjoyed your video. I know you mentioned making this from scraps but what size were the rails (height and depth of the track). Thanks for putting this out there.
Tee Ammon Thanks! I don’t have it readily available here, so I can’t measure, but the rails are U shaped, measuring 20 x 20 mm. Can’t remember the height, 50-60 cm. Never use the top half anyway, so it could me made shorter/less tall.
Not bad at all.
Great video what diameter size rod did you use for the meat rack? Thank You
Thanks! I think it was 8 mm if I recall correctly.
great DIY video! My Brother-in-Law just got a welder and plasma cutter, and Drill press which he said I can use at any time. Now I know what I want to do for my 1st project.
what size steel rod did you use and how deep did you make your cuts? looked like at least 1/2 way thru or more. Also, what size rod did you use to crank the cables and grill.
lastly was that Lava Lock gasket? TIA
Thanks! I used an 8 mm rod. The crank shaft is 15 mm. And yes, I use a replacement gasket for Big Green Egg of Kamado Joe. Helps avoid scratching the kettle.
I am impress, but how do you hold the rack in place while it is up? Thank You
Thanks! I have a ‘brake’ of sorts on top which blocks the crank from rotating.
Badass
Think i'll order one of you.. lol
TIG or MIG welding?
Great video brother!
MIG!
Elton's BBQ-pit Thanks Elton! I’m doing mig welding here.
Hmm.. think i have to visit Biltema.. ;-)
I’m using the ESAB Caddy 200, absolutely love it! Highly recommended: www.sodermalmsmaskin.se/product/caddy-mig-c200i-kit
What size angle iron did you use? Thank You
It's 20x20 mm.
What brand & size welder did you use?
I use an ESAB Caddy MIG C200i.
So what keeps it from falling off. I didn't see you clip or secure the whole piece you made. Can it just fall over?
Well, nothing. But due to its weight it sits there pretty firmly. You would have to knock it really hard for it to come off.
❤🎉❤🎉
Whats the rounded ring ? Where can I find that ?
Blown Castellanos Not sure what ring you mean, I fabricated it all from scratch?
Hank's True BBQ I meant the rounded ring base you used to weld your grill grate,
@@mcastellanos657 Ah, I made it from a piece of roundbar. I had a 70" long roundbar which I bent by hand. I cut a bunch of grooves in it so it would bend easier. You can see how I made it at 08:00 minutes into the video.
Do u have a list of the size gauge of materials u used
Nope, sorry. I built it from scrap material I had lying around, so no drawings or plans.
Har byggt detta själv, vilken sorts tråd använde du?
Viggothechillguy Kul! Vad menar du med tråd, vajern för att veva upp och ned? Eller nåt annat?
Hank's True BBQ ja precis
@@viggowallenberg7065 Hmm, köpte nån standard-wire på Clas O eller Bauhaus, tror den är 1-1.5 mm i dia. Smidig och lättböjd iaf.
Would you have dimensions please
It is 22" in diameter, and 18" tall.
Your gonna eat burned paint;)
Actually not. The grates aren’t painted.