2018 PSE EVOLVE 31 COMPOUND BOW REVIEW
HTML-код
- Опубликовано: 17 окт 2024
- The PSE Evolve 31 is the top of the range PSE compound hunting bow. 31" axle to axle. IBO 342 fps, Weight 4.3#. Draw length 24.5-30" with rotating module and 80-90% letoff.
We look at the Evolve 31, Chrono the bow and shoot at 18 meters.
archeryshop.com...
I have this exact model and it is a great bow. However, on day one the limb bolts were very hard to turn. My dealer dialed down the weight to my requested 55 lbs, but did not comment on the hard to turn limb bolts. Found out for myself once I got home. Turns out the threads were completely bone dry with lots of aluminum particles, so I disassembled, cleaned, and applied some lithium grease to the threads which helped some. Years later when turning out the bolts (well below the 10 turns max) a bolt seized completed followed by the threads stripping and the bow disassembling itself and limbs falling off. The aluminum cylinder limb bolt anchor's threads completely failed and fortunately no injury and no other parts damage, the limbs being under relatively low compression at the time. Called the US dealer I bought it from who said he didn't have parts and doubted PSE had parts either because this NEVER EVER happens. Called PSE who said this has occurred multiple times and said my grease fix was appropriate (when I rued not using anti-seize compound). PSE refused to ship or sell parts directly to me citing liability reasons. They sent a set of new bolts and cylinders to another local PSE dealer who was super helpful. When the parts arrived (no charge from PSE) there were two issues. One, the new cylinders had one sided shoulders and thus would not seat in the riser fully. So I pried out the stick-on aluminum oval plates covering the riser cylinder recesses and the new cylinders slid in place perfectly. Removing the plates has the added advantage of no longer hiding the usable threads on the limb bolts. Two, the dry threads on the new parts were binding already (dry fitting off the bow). I found about 4 thread nicks on each steel limb bolt, probably from being tossed into parts bins. To prevent these thread nicks from damaging the soft new aluminum cylinder threads, I judiciously filed down the nicks and hand dry fit the steel bolts to the aluminum cylinder threads. Generated some minor aluminum dust which I blew clean with compressed air before applying anti-seize compound and installing the new parts. Anti-seize is best for slow turning but high stress parts and grease is better for fast rotating and lower stress parts. My Evolve 31 is now fully restored, shooting acccurately, and the limb bolts are easy to turn even when under max tension. So if your limb bolts seem very hard to turn or stop turning they could seize and strip the threads. I would get new parts, hand fit the threads, and apply anti-seize.
I just recently got the evolve 31, had the creaking noise at the cam, put the wax on behind the module and it’s gone. Thank you for taking the time to do these reviews, they are greatly appreciated ...
Where exactly did you put the wax? I have the same issue. Thanks
@@conradsmith6037 I put it under the entire module and then tighten it back down snug. The sound never came back.
Your reviews feel just lovely to watch.
Xpedite vs evolve 31 HL mod accuracy challenge would be a good vid. Great vid as always!
Great video as always. Do you think the evolve 31 shoots as accurate as the evolve 35 or shootdown? I'm still shooting a 2006 bowtech equalizer (32" ATA, 3.5lbs, short draw) and these PSE evolves are the first bow in ages which are tempting me to switch. The old equalizer is a near perfect fit for me which is why I keep loving it.
Great Video as always! I own a 2017 Evolve 31 and its amazing.
Yeah I bought the Carbon Air in March. And I have to admit, that the creak or noise when drawing bow back has been a little unsettling. Its nice to hear that there is a fix, why not let me know at time of purchase steve? Will try the "fix" when home.
Thanks for the advice on making d-loops.
if you do a vid comparing the other modules can you also do it at each letoff setting?
Fun review as always! Need an updated review of the Xpedite preferably with the HL mods. Compare that with the evolve 31 and 35.
Is there any difference worth noting between the 17 and 18 model?
Hey I have one on order ,,,6 weeks back order ....thanks for your videos they have help me
Nice review as always, slightly off topic but can you advise a sorter ata bow for a draw length of 32 inches....I currently have a Freak SP, but am interested in a more compact setup for the woods. cheers
you are going to have issues with a bow smaller than 33" ata with a 32" draw length. The string angle will be unruly, it'll be harder to get a consistent anchor point and you will be quite far from the peep sight
So you see any issues with the roller glide eating up cables? Should I serve?
Sometimes yes. I have not done mine, but it is safer to do so.
Thanks for your test and your Time!!
Nice bow but a bit out of my price range. As a recurve archer wanting to try compound for target I'm thinking about a stinger as my son shoots one. Are you still planning to do a video on the stinger at 50m with a target setup?
David Wood Stinger rocks.
Agreed as the one shot I had with my sons left hand bow shooting right handed went into the x at 25 meters. I'm more interested in seeing what you would fit to it for 50 meters target archery. I'm thinking WNS SPC 300 but other than that I'm not sure.
Thanks steve for the creecking tips..its so annoying..i wax it right away and it magically gone..
wan nijangs i was just getting my xpedite looked at today for this same issue
Justin Dubose yes bro..u better look at it..i just take out the module then i wax the surface N put it back together again..
Will you be reviewing the evolve 28? Would be interesting to see it head to head against the triax
Eric D When they come in. Next is Triax then the Elites
Awesome bow. Love your videos Steven
Was wondering when you were going to review the Triax. Looking forward to it.
astrospud Triax is next
Yeah, at last we will know if it is just the hype or if the triax is really a marvel. You seem doubtful ;) but i know you are fair so i'm very impatient.
It's summer time, so why is it cool weather when you filmed this video?
Lumpy Lasagna you should not live in the same hemisphere... he lives in Australia.
The evolve 35 the feel is different little better than the 31 Accuracy very good
Beste BOGEN- Vorstellungen 👍👍👍... Grüße aus Deutschland / Berlin 😎🇺🇸
The triax still weighs a ton. Not saving any weight, its actually heavier than the evolve 31
Got one 2 weeks ago and getting 318 fps w 413 grain arrows. Cant wait for deer season
Is that with 70lb draw?
When are you going to review the Mathews trx38??
Tony Maldonado I have not purchased one. The 40s I had took ages to sell
What's changed from last year's model?
Harry 16 Peep sight decreased speed by 10 fps. New cable guard
Also the cams have a extra support, so improved cams..
I actually LOVE all your vids! I'm from US .
As an advisor bowhunter and 3D shooter, I enjoy trying different brands. But, you are either sponsored as a seller or a shooter or maybe both. Why? Because every PSE that you review is a favorable one in every test!
I've owned PSE..they are great bows! But Elite,Mathews,Hoyt "not a fan". Lol also have just as good shooters.
I've owned many over my 30+ yrs of bowhunting and 3d and enjoy most of the brands. I'm actually shooting Bear bows. Arena 30 for hunting and 34 for 3d. Love them but I'm not biased. It would just be nice to know that PSE is favoring you in some way. But not needed.
In the past he said as a retail agent PSE were always good to work with , I think its a long term relationship hes got . Respect yo
jordan amon I review what I stock. With the new 28 and triax and Elite I thought this was a good spot to start. I did all Obsession. I have the RPM to do to. No I get nothing from anyone not even a shirt. I depends what customers ask for too.
Archery Supplies 👍👍
What is the price of this bow?
About $1000.00 U.S.
$1290 aud on the website
David Wood thnx
Eslix Gaming 1200 in oz
That’s pretty fast where some bows at max 70 shoot that same arrow and get slower speeds
My next bow.
Actually it is my first bow... ever...(in 35 inches version)
Banana for scale
Should have get your mate Jimi Ellis to set it up, would have had way more entertainment value...
LOL
Triax is built for HUNTING not COMP
My point is the longer bows tend to be easier to shoot. In the Mathews Triax promo's they have pros nailing with the Triax at 70 meters. Which to me is amazing. I have always found the shorter bows hard to shoot so it will be interesting to see.
trash factory limb dempener and get limbsaver twistlock not the same bows :)
You tube is allowing porn now?.