Nice video. Thanks for putting it out there for us to see. I try to fix everything and soldering is a hobby of mine. But, I was not aware of this sector of micro-repairing. Nicely done mate.
Great helpful video , I realise this is an old post , but I have the very same issue with the screen , only the filter( the one next to your one ) had blower up and split in two and the pad on the end nearest the end of the connector is totally missing , so I done a jumper wires from the one pad to the first leg of the connector , I think the issue still remains but now the power manager chip is getting really hot 🥵 my ZXW has to be bonded , so I am hoping you could tell me a better place to run that jump wire other then the connector please 🥴🙏
I have this same issue with my Ipad pro, except its not a pattern type of lighting, its big small here and there along the edge, and one bigger one in the center .....now contemplating if I should get it repaired or get a new one?
I have the same problem with my iPad. I suspect it is because i let the screen on for too long. Sometimes 5 to 6 hours non stop, because the kids like to watch songs on youtube.
My iPad 2nd gen has this dark spot issue on the right side but it presents in three triangles. After watching your video there is no way that I could fix this myself. How would I find a person who could fix this? How much would it cost? I'm located in Princeton, NJ. Thank you for this Great video!
Hello Debbie, Glad you enjoyed the video. Contact us at 818-668-7058 or use the contact form at northridgefix.com/ to inquire. You can send in your device using the mail in form at northridgefix.com/mail-in/
Deserves a sub! I have an iPad with this issue but suspect a cable was inserted incorrectly causing a small over voltage somewhere on the 3.3v lines. How much do you charge for a repair like this? Are you in the UK?
Hi is this something that apple repair can do? I experienced the same issue just after my apple care expired, so i probably need to cough up quite some money.. would be helpful if you could let me know the approximate cost for repair like these as well.. thanks! Nice video btw
Great equipment and set-up. I always say to do the job efficiently, use the right tool for the right job and your set-up looks great. Of course the right knowledge and experience also helps and you come across as knowledgeable and experienced in this area too. Are there also robotic arms available too to aid with component placement and desoldering etc? What other methods are available for soldering/desoldering small surface mount components apart from a heat gun?
Practice is the mother of all skills. Everything is done by hand. No robotic arms. Hot air station, and Solder iron is all you need. Hot tweezers helps but not needed.
Dark Wyvern mine is the IPad 6th generation, and it gave the same defect right after one year of use. It seems that most iPads happen this unfortunately.
Júlio César exactly , it worked well till mine (6 gen )was under warranty and now 2 big black spots started appearing on left side of screen ,did u find solution to it.
If it's n ipad air, it could be that the glass or lcd was replaced without disconnecting the battery first. Check our recent video for ipad pro having the same issue ruclips.net/video/ppD0BWF1Hps/видео.html
They can be shaky at times depending on the size and location of the component. Sometimes there are no room for mistakes. For the most part, i try to keep them as steady as i can.
I am currently experiencing this problem as well...never had it happen before and have had iPads since the beginning...looks like I'm gonna have to send it off to apple cause thankfully it's still under warranty.
Hi man what is that program you used in your computer to find components and show you the filter connected to the which pin of LCD connector pls ? a Colleague from Australia cheers
Comments are only to answer questions about the video and not to conduct business with. Prices change with time. We do not post prices on youtube. You can either use the mail in form or call in for an estimate 818-668-7058.
This repair shows how knowledgeable you are. Must repair should would just recommend replacing boards.
Thank you, but I’m a kid and I do not know how to do those and I’m afraid if the iPad’s screen will loose and come off easily
Same ;~;
Same but im not a kid anymore 🥲😄
Nice video. Thanks for putting it out there for us to see. I try to fix everything and soldering is a hobby of mine. But, I was not aware of this sector of micro-repairing. Nicely done mate.
Very nice!
Great helpful video , I realise this is an old post , but I have the very same issue with the screen , only the filter( the one next to your one ) had blower up and split in two and the pad on the end nearest the end of the connector is totally missing , so I done a jumper wires from the one pad to the first leg of the connector , I think the issue still remains but now the power manager chip is getting really hot 🥵 my ZXW has to be bonded , so I am hoping you could tell me a better place to run that jump wire other then the connector please 🥴🙏
Love from India 🇮🇳
I have this same issue with my Ipad pro, except its not a pattern type of lighting, its big small here and there along the edge, and one bigger one in the center .....now contemplating if I should get it repaired or get a new one?
Amazing! May I know the possible reason of backlight issues? My iPad also has this kind of problem
i realize I am quite off topic but do anybody know of a good site to stream new tv shows online ?
@Jaiden Rhett I watch on Flixzone. You can find it on google =)
I have the same problem with my iPad. I suspect it is because i let the screen on for too long. Sometimes 5 to 6 hours non stop, because the kids like to watch songs on youtube.
I need this fix in ukbut no one has this knowledge around here
Wow! You are good!
does Apple has any defact recall on it?
My iPad 2nd gen has this dark spot issue on the right side but it presents in three triangles. After watching your video there is no way that I could fix this myself. How would I find a person who could fix this? How much would it cost? I'm located in Princeton, NJ. Thank you for this Great video!
Hello Debbie, Glad you enjoyed the video. Contact us at 818-668-7058 or use the contact form at northridgefix.com/ to inquire. You can send in your device using the mail in form at northridgefix.com/mail-in/
I have the same problem with my Air 2 and after watching this I had same conclusion. No way in hell I could do that repair.
Debbie Peterson I have that too
how do you find the exact part needed? and what size are those 0201?!
Deserves a sub! I have an iPad with this issue but suspect a cable was inserted incorrectly causing a small over voltage somewhere on the 3.3v lines.
How much do you charge for a repair like this? Are you in the UK?
Very clever.
Battery stayed connected?
Would it be fine if I don’t get it fixed?
Nice job again like always
Hi is this something that apple repair can do? I experienced the same issue just after my apple care expired, so i probably need to cough up quite some money.. would be helpful if you could let me know the approximate cost for repair like these as well.. thanks! Nice video btw
last_minute_warrior I Have the Same Problem
Great equipment and set-up. I always say to do the job efficiently, use the right tool for the right job and your set-up looks great. Of course the right knowledge and experience also helps and you come across as knowledgeable and experienced in this area too.
Are there also robotic arms available too to aid with component placement and desoldering etc? What other methods are available for soldering/desoldering small surface mount components apart from a heat gun?
Practice is the mother of all skills. Everything is done by hand. No robotic arms. Hot air station, and Solder iron is all you need. Hot tweezers helps but not needed.
Hi, i have the same problem but not from motherboard, so can you share video with screen itself, please 🙏?
well done
nice video, good explain of the problem
Gracias. Me ha servido. Eres un crac.
Awesome ✌️✌️✌️
I have the same problem where can i send you my ipad to fix and how much money?
How much does this cost, I am facing the same issue,
I have the same on my iPad, almost like dark shade is leaking out of holes. Also on the left side of the screen.
Dark Wyvern what is you IPad ?
Normal iPad Air, or iPad Air 2
Dark Wyvern mine is the IPad 6th generation, and it gave the same defect right after one year of use. It seems that most iPads happen this unfortunately.
Júlio César exactly , it worked well till mine (6 gen )was under warranty and now 2 big black spots started appearing on left side of screen ,did u find solution to it.
Same thing on my iPad 6
Nicely done! But why did you have a hammer on your table when you were about to test and see the results?
:-) just in case things didn't go the way i want....
I also have same spots in bottom. What’s the reason behind this to occur?
If it's n ipad air, it could be that the glass or lcd was replaced without disconnecting the battery first. Check our recent video for ipad pro having the same issue ruclips.net/video/ppD0BWF1Hps/видео.html
iPad air a1475 is not opening, please press the opening key 00.09 ma traction
thnx a lot.
If I repair buy Apple servic center what is price any Idea please telll
how much does this repair cost?
Спасибо друг! Ты очень помог мне. Лайк тебе и подписка!))
How are your hands so steady?
They can be shaky at times depending on the size and location of the component. Sometimes there are no room for mistakes. For the most part, i try to keep them as steady as i can.
This guy's a dad gummed genius!
I am currently experiencing this problem as well...never had it happen before and have had iPads since the beginning...looks like I'm gonna have to send it off to apple cause thankfully it's still under warranty.
Hi man
what is that program you used in your computer to find components and show you the filter connected to the which pin of LCD connector pls ?
a Colleague from Australia
cheers
PADS PCB from Mentor Graphics.
what software are you using?
Hi, im in México, i have this problem on IPad Air 2 can You help me to see the components i need change plz
Guillermo Trujillo Meade me too
thanks bro ... what's the microscope and the hot tweezers and iron you're using??
Microscope amzn.to/2D7rKvZ, Polarizer lens amzn.to/2qCnP7w, and S-109 Stand .
NorthridgeFix تسلم اخي وبارك الله فيك ... بس ليش مو كلش نشط انت .. خليك اكتيف ونزل فيديوهات شغلك يعجبني... موفق حبيبي
I got couple of questions can I fix it without getting in?, and why when my iPad fall I saw this spots ?
You have to get in unfortunately.
There is not a big enough face palm for that comment.
U are like a doctor
How much is this to fix?
Fill out the form at northridgefix.com/mail-in/ and we'll give you an estimate before you mail it in.
NorthridgeFix why can’t you just give me an estimate please? I don’t want to mail it in
Comments are only to answer questions about the video and not to conduct business with. Prices change with time. We do not post prices on youtube. You can either use the mail in form or call in for an estimate 818-668-7058.
💟💟💟💟💟💟💟💟💟💟
Another business. Apple created another job for someone. Not many can do this job so there ya have it another reason for you to pay for warranty.