Stand Out From The Crowd with this 650SX Rear Exhaust Conversion

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 62

  • @steven.h0629
    @steven.h0629 11 месяцев назад +7

    Getting colder.. shorts and a jacket! 👍😎✊

    • @R1Kyle
      @R1Kyle 3 месяца назад

      Yes I know what you mean, I have had a cold start to summer here and my local lake has just warmed up to 59 degrees. But this week we should maybe see a day or two where it hits the low 90's F outside.

  • @levergun
    @levergun 11 месяцев назад +6

    Hi Jim! Merlin brought me here. I'm not a jet ski guy, but I'm fascinated by what you do.

    • @jetskijim007
      @jetskijim007  10 месяцев назад +1

      That is so cool! Welcome to the channel! :-)

  • @douglasbasinger2513
    @douglasbasinger2513 11 месяцев назад +7

    Hitting the hole from the outside with the 3/8 rod was awesome. I am sure you have mad skills sir. Enjoyed it!

  • @dreamlinerkoa6438
    @dreamlinerkoa6438 11 месяцев назад +9

    🎉 like it 😊

  • @ruffpizza
    @ruffpizza 11 месяцев назад +6

    new bullet ski looks rad... put a wetsuit on and test it out for us...

  • @doublem6027
    @doublem6027 11 месяцев назад +5

    Always great work! Interesting video to watch always entertaining

  • @dougfeehan8421
    @dougfeehan8421 11 месяцев назад +5

    Awesome video

  • @KrisD007
    @KrisD007 11 месяцев назад +3

    your ski sure take a beating!!!

  • @rickerra
    @rickerra 11 месяцев назад +4

    My first 650sx had the rear exhaust. My current 650sx is a little older and does not. Sure do miss it. This upgrade is very tempting. Thanks for explaining it so well! Cheers!

  • @StefanMailey
    @StefanMailey 11 месяцев назад +4

    Beauty! Iv been here since... I think I subscribed back when you had 150 subs. Crazy how fast you've taken off! Great content and your such a humble a cool dude, Jim. Keep up the fantastic work!

    • @jetskijim007
      @jetskijim007  10 месяцев назад

      Thank you for the kind words, and thank you for watching. :-)

  • @KYLEtheOKIE
    @KYLEtheOKIE 11 месяцев назад +3

    The Marine Tex reminded me of fixing hydro hoist boat lifts at the marina I worked at as a teenager. Good stuff! Good video!

  • @dustinwild
    @dustinwild 11 месяцев назад +4

    Great video! That's gotta be so amazing to have those great companies in your back yard! Really great content, love the format, and just a good all around job! Would love to see an old 440, or 550 conversion. I wasn't going to bother with this mod on mine, until you mentioned the carbon monoxide, and then started to think about just how much exhaust I inhale on mine, vs my SXR. Totally going to attempt this one. Again, great job, and thanks for sharing all this info on these older machines!

  • @AtimatikArmy
    @AtimatikArmy 11 месяцев назад +10

    Cool! How do we do this with a 550sx to have a straight pipe with no horseshoe bend? Cut tray?

    • @jetskijim007
      @jetskijim007  10 месяцев назад +1

      no, I usually move it to the other side and foam the stock one up, but if you want to preserve it then yeah, cut the tray.

    • @ozzielinkin
      @ozzielinkin 4 месяца назад

      What type of tubing , what size and where did you get the pipe . Thank you .

  • @jamesdaugherty-e8c
    @jamesdaugherty-e8c 11 месяцев назад +2

    extremely informative! I thought desert rats were tough, but I guess it only takes a little cold water to show your soft side!

  • @jefflongley8644
    @jefflongley8644 4 месяца назад +1

    Awesome and very informative!

    • @jefflongley8644
      @jefflongley8644 3 месяца назад

      Would you know a place to figure out the right jets to run for my 650SX I am building?

  • @HRDconstruction
    @HRDconstruction 6 месяцев назад +1

    Just bought a 650SX and I've been using your guides to build one of my own, your videos are great for finding parts and working on these old machines!

  • @MrToynut
    @MrToynut 11 месяцев назад +3

    Hi Jim, Enjoy the videos!! Keep up the entertaining content. Curious about the circle chart above your bench. Is that an o-ring comparator or some sort of template? Giant o-rings if that is what it is.

  • @englandentertainment1530
    @englandentertainment1530 7 месяцев назад +1

    Awesome video man!!

  • @batteryman16
    @batteryman16 11 месяцев назад +1

    Another great video. This seems like a great conversion. I bet it does help with noise quite a bit, the 650sx and x2 I have noticed are always on the louder side... that or the 650 just has a very distinct sound :D

  • @mattturner7238
    @mattturner7238 11 месяцев назад +3

    Hey jim you said 26" inch aluminum tube when you measured it but mentioned 25" during your parts list review? Was it really 26" or did you mistakingly say 25" piece for inside section of tube. Very informative stuff keep it up

    • @jetskijim007
      @jetskijim007  11 месяцев назад

      Oh, good catch, the gap was 26", the tube was 25", I left the one inch out for 1/2 inch each side for clearance. It must have been edited out. :-)

  • @BennettBuilt-yu2gw
    @BennettBuilt-yu2gw 7 месяцев назад

    I just started getting my two 650sx's rebuilt for this summer and SO glad this popped up in my feed. I cant STAND that 2-stroke in my face haha! Thank you!

  • @williamlovely450
    @williamlovely450 11 месяцев назад

    love your work

  • @ghfgh6150
    @ghfgh6150 11 месяцев назад +4

    That dead blow made me as nervous as a doctor putting on a glow>

  • @dalerose1694
    @dalerose1694 11 месяцев назад +4

    Jimmy what are you doing with it? With that old Ford up on the lift

    • @jetskijim007
      @jetskijim007  11 месяцев назад +4

      filming. That will be an upcoming video. 12 valve cummins swap. :-)

    • @dalerose1694
      @dalerose1694 11 месяцев назад +1

      @@jetskijim007 I can’t wait

  • @ozzielinkin
    @ozzielinkin 4 месяца назад

    What type of tubing did you use , what size and where did you get the tubing ? Thank you .

  • @gittingjiggingwidit
    @gittingjiggingwidit 11 месяцев назад +3

    what else can I use besides marine tex?

    • @jetskijim007
      @jetskijim007  11 месяцев назад +2

      West systems epoxy. :-)

  • @MichaelTramontano
    @MichaelTramontano Месяц назад +1

    Im in need of a 650 sx handle pole would you have an extra laying around by chance

  • @keithwendl8328
    @keithwendl8328 11 месяцев назад +4

    More thrust!😂

  • @Ritualz999
    @Ritualz999 3 месяца назад

    Same concept for a js550? I would imagine its the same process right?

    • @jetskijim007
      @jetskijim007  3 месяца назад +1

      correct, except on the 440/550's we run it down the other side (starboard)....

    • @Ritualz999
      @Ritualz999 3 месяца назад

      Awesome, Thank you for the response!

  • @92250x
    @92250x 10 месяцев назад

    So.......what's the mph after the speed run?

  • @spacenut708
    @spacenut708 11 месяцев назад +2

    Winter? You call that winter?? 🤣🤣🤣❄☃❄

    • @gittingjiggingwidit
      @gittingjiggingwidit 11 месяцев назад

      🤣🤣🤣

    • @sofarout
      @sofarout 11 месяцев назад

      🌴🌴🌡☀ this is the best winter... 🌴🌴🌡☀

  • @quentinkeller5174
    @quentinkeller5174 11 месяцев назад +3

    Why are you doing a hull expansion .

    • @StefanMailey
      @StefanMailey 11 месяцев назад +2

      Extensions.. They add length to your boat. Helps keep the nose planted and cornering!

    • @quentinkeller5174
      @quentinkeller5174 11 месяцев назад +1

      @@StefanMailey thanks. So that means he has to cut it in half and add or does he have to have a new one made.

    • @StefanMailey
      @StefanMailey 11 месяцев назад

      @@quentinkeller5174 extensions make your ski longer. Not wider. They “extend” the hull. ProWatercraft sells them. Or you can 3D print some. Just do a quick google on jetski hull extension. Cheers.

    • @HavasuHeidi
      @HavasuHeidi 11 месяцев назад

      @@quentinkeller5174 cut in half vertical or horizontal?

    • @jetskijim007
      @jetskijim007  10 месяцев назад

      we will do hull extensions once we get this ski past the 50 mph mark. Once there it will be easier to demonstrate what they do (it is more obvious for filming). :-)

  • @ChappersSP
    @ChappersSP 11 месяцев назад +2

    hi jet ski jim, are you on Facebook? thanks Simon

  • @Jerry-sy8rd
    @Jerry-sy8rd 11 месяцев назад

    You could put AN ELEPHANT on that spazcraft! Guess you are sorta😀.
    WAIT…that was just the thumbnail 🙄.
    Bait ‘n switch☹️

  • @R1Kyle
    @R1Kyle 3 месяца назад +1

    I feel cheated, I wanted to see it run!

  • @JackmWallace
    @JackmWallace 8 месяцев назад

    Why don't you have a minny jet boit 😮

  • @deadengine
    @deadengine 11 месяцев назад +1

    I like your channel but there was a 3 minute ad I couldn't click out of or stop... can you make it go away?

    • @doublem6027
      @doublem6027 11 месяцев назад

      Thats not him doing that. That is youtube promoting the ads that how they get payed. You will have to pay to premium prescription to get rid of ads .

    • @karenpalmer2195
      @karenpalmer2195 11 месяцев назад

      Somebody has to pay the bills so you can watch for free. If you want no adds pay for RUclips Premium.